Prev: [PATCH] drivers/mfd: remove unneeded and dangerous clearing of clientdata
Next: GSoC project: Improving kconfig using a SAT solver
From: Nils Radtke on 17 May 2010 08:20
From: Nils Radtke <lkml(a)Think-Future.de>

This patch adds support for an olivetti olicard100 HЅDPA usb-stick.

This device is a zeroCD one with ID 0b3c:c700 that needs switching via
eject or usb-modeswitch with
MessageContent="5553424312345678000000000000061b000000030000000000000000000000".
After switching it has ID 0b3c:c000 and provides 5 serial ports ttyUSB[0-4].
Port 0 (modem) and 4 are interrupt ports.

Signed-off-by: Nils Radtke <lkml(a)Think-Future.de>

---

I guess the previous patch for .33.4 came to late for inclusion. Am I missing
something else to get the IDs merged into .35 or maybe .34.1?

Thank you,

Nils


drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)


Index: linux/drivers/usb/serial/option.c
===================================================================
--- linux.orig/drivers/usb/serial/option.c 2010-05-17 14:04:57.000000000 +0200
+++ linux/drivers/usb/serial/option.c 2010-05-17 14:05:00.000000000 +0200
@@ -380,6 +380,10 @@

#define CINTERION_VENDOR_ID 0x0681

+/* Olivetti products */
+#define OLIVETTI_VENDOR_ID 0x0b3c
+#define OLIVETTI_PRODUCT_OLICARD100 0xc000
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -726,6 +730,8 @@
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},

{ USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
+
+ { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH] drivers/mfd: remove unneeded and dangerous clearing of clientdata
Next: GSoC project: Improving kconfig using a SAT solver