Prev: VT7 Won't boot..strange messages
Next: ATX 2.01 PSU ok when ATX 2.03 required?
From: Stephen Le Page on 30 Jan 2006 23:59
I'm hoping someone here can help me:

I have a computer with an ABIT AS8 motherboard.
The computer has been working fine for 14 months.
I installed the latest BIOS update a month or so ago.

Just in the last week, the computer has been refusing to boot some
of the time, and now it will never boot.

I have tried unplugging the power cable for minutes, clearing the
CMOS using the jumper, removing the button battery, and
disconnecting the two plugs connecting the motherboard directly to
the power supply (ATX12V1 and ATXPWR1), but to no avail.

These are the only clues I have, but I am not sure how to interprate
them:

Sometimes when I connect the power cord, the uGuru POST code is '0.0.',
and other times it is 'F. '.

I recorded the uGuru POST code display with a digital camera (at
30 frames per second) during startup:

time (s) POST code
0.000 '0.0.' pushed power button, fans power up
0.067 '8.3.'
0.300 'F. ' all fans powered off!!?
5.133 ' F.'
5.200 ' 1.'
6.300 '0.0.'

N.B. In the manual:
'8.3.' is 'ATX power supply ready',
'8.4.' is 'DDR Volage ready'
'F.1.' is 'SoftMenu Reset'.

Does this mean my power supply is dead, my RAM is dead, or something
else?

Thanks in advance,
Stephen
stephen_le_page(a)yahoo.com.au

From: BigVoice on 1 Feb 2006 17:56
Try to clean up all the contacts of your PCI cards and VGA cards.

The problem may be due to poor contacts.

BigVoice

On 31 Jan 2006 04:59:14 GMT, Stephen Le Page
<stephen_le_page(a)yahoo.com.au> wrote:

>I'm hoping someone here can help me:
>
>I have a computer with an ABIT AS8 motherboard.
>The computer has been working fine for 14 months.
>I installed the latest BIOS update a month or so ago.
>
>Just in the last week, the computer has been refusing to boot some
>of the time, and now it will never boot.
>
>I have tried unplugging the power cable for minutes, clearing the
>CMOS using the jumper, removing the button battery, and
>disconnecting the two plugs connecting the motherboard directly to
>the power supply (ATX12V1 and ATXPWR1), but to no avail.
>
>These are the only clues I have, but I am not sure how to interprate
>them:
>
>Sometimes when I connect the power cord, the uGuru POST code is '0.0.',
>and other times it is 'F. '.
>
>I recorded the uGuru POST code display with a digital camera (at
>30 frames per second) during startup:
>
>time (s) POST code
>0.000 '0.0.' pushed power button, fans power up
>0.067 '8.3.'
>0.300 'F. ' all fans powered off!!?
>5.133 ' F.'
>5.200 ' 1.'
>6.300 '0.0.'
>
>N.B. In the manual:
>'8.3.' is 'ATX power supply ready',
>'8.4.' is 'DDR Volage ready'
>'F.1.' is 'SoftMenu Reset'.
>
>Does this mean my power supply is dead, my RAM is dead, or something
>else?
>
>Thanks in advance,
>Stephen
>stephen_le_page(a)yahoo.com.au

 | 
Pages: 1
Prev: VT7 Won't boot..strange messages
Next: ATX 2.01 PSU ok when ATX 2.03 required?