ACPI: pci_irq, add PRT_ quirk for IBM Bartolo
in [Kernel]
|
Prev: Financial aid from FDV,Contact Dr.Razaq Immediately.
Next: [GIT PULL] Please pull fix patches sitting in linux-next
From: Robert Hancock on 5 Jul 2010 20:30 On 06/30/2010 03:20 AM, Jiri Slaby wrote: > On 06/30/2010 01:23 AM, Robert Hancock wrote: >> What kind of slot is it, and what kind of device was being used, >> something designed for this machine or just some random card? > > It's a netmos 9835 serial card with 2 ports. PCI, there is no PCIe in > the machine as far as I can see. > >> Can they >> tell what IRQ the device is reportedly using in Windows and if it >> matches what Linux reports? > > I can ask them. What I know is that with acpi=noirq (or with the quirk) > the IRQ number is 10, with acpi without the quirk, it's 11: > > PCI: setting IRQ 2 as level-triggered > serial 0000:00:09.0: found PCI INT A -> IRQ 2 > 0000:00:09.0: ttyS4 at I/O 0x1898 (irq = 10) is a 16550A > 0000:00:09.0: ttyS5 at I/O 0x1890 (irq = 10) is a 16550A > > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > serial 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> > IRQ 11 > 0000:00:09.0: ttyS4 at I/O 0x1898 (irq = 11) is a 16550A > 0000:00:09.0: ttyS5 at I/O 0x1890 (irq = 11) is a 16550A > > I still no point in comparing this to Windows' setup. We can't find out > whether it is quirked or better (without some bug) handled there. Well, you can see if Windows shows IRQ 10 or 11 for that device.. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Jiri Slaby on 19 Jul 2010 12:30 On 07/06/2010 02:28 AM, Robert Hancock wrote: > On 06/30/2010 03:20 AM, Jiri Slaby wrote: >> On 06/30/2010 01:23 AM, Robert Hancock wrote: >>> What kind of slot is it, and what kind of device was being used, >>> something designed for this machine or just some random card? >> >> It's a netmos 9835 serial card with 2 ports. PCI, there is no PCIe in >> the machine as far as I can see. >> >>> Can they >>> tell what IRQ the device is reportedly using in Windows and if it >>> matches what Linux reports? >> >> I can ask them. What I know is that with acpi=noirq (or with the quirk) >> the IRQ number is 10, with acpi without the quirk, it's 11: >> >> PCI: setting IRQ 2 as level-triggered >> serial 0000:00:09.0: found PCI INT A -> IRQ 2 >> 0000:00:09.0: ttyS4 at I/O 0x1898 (irq = 10) is a 16550A >> 0000:00:09.0: ttyS5 at I/O 0x1890 (irq = 10) is a 16550A >> >> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 >> PCI: setting IRQ 11 as level-triggered >> serial 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> >> IRQ 11 >> 0000:00:09.0: ttyS4 at I/O 0x1898 (irq = 11) is a 16550A >> 0000:00:09.0: ttyS5 at I/O 0x1890 (irq = 11) is a 16550A >> >> I still no point in comparing this to Windows' setup. We can't find out >> whether it is quirked or better (without some bug) handled there. > > Well, you can see if Windows shows IRQ 10 or 11 for that device.. But how can I find out which link it is routed to in Windows? Without that information the number is meaningless, no? thanks, -- js suse labs -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Robert Hancock on 19 Jul 2010 15:20 On Mon, Jul 19, 2010 at 10:29 AM, Jiri Slaby <jslaby(a)suse.cz> wrote: >>> I still no point in comparing this to Windows' setup. We can't find out >>> whether it is quirked or better (without some bug) handled there. >> >> Well, you can see if Windows shows IRQ 10 or 11 for that device.. > > But how can I find out which link it is routed to in Windows? Without > that information the number is meaningless, no? If you look at the pattern of which IRQs are shared by what devices in Linux and compare it to Windows you can get a good idea. Normally the assignment of devices to interrupt lines is hard-wired on the motherboard and doesn't change. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Jiri Slaby on 20 Jul 2010 05:30
On 07/19/2010 09:19 PM, Robert Hancock wrote: > On Mon, Jul 19, 2010 at 10:29 AM, Jiri Slaby <jslaby(a)suse.cz> wrote: >>>> I still no point in comparing this to Windows' setup. We can't find out >>>> whether it is quirked or better (without some bug) handled there. >>> >>> Well, you can see if Windows shows IRQ 10 or 11 for that device.. >> >> But how can I find out which link it is routed to in Windows? Without >> that information the number is meaningless, no? > > If you look at the pattern of which IRQs are shared by what devices in > Linux and compare it to Windows you can get a good idea. Normally the > assignment of devices to interrupt lines is hard-wired on the > motherboard and doesn't change. Ok, thanks for the hint. What we've found out is that it works on 2.6.27 (with slightly changed configuration). In dmesgs, the only two relevant differences I see are the 8250 interrupt sharing and disabled-apic handling. 8250.irqs_share=1 passed to 2.6.32 does not help. The apic, in the new kernel, returns zeros on read, whereas on the old one, there is a dummy page which returns previously stored values if I understand correctly. Can this have an effect? The diff between .configs is at: http://www.fi.muni.cz/~xslaby/sklad/conf-diff Initializing cgroup subsys cpuset Initializing cgroup subsys cpu -Linux version 2.6.27.19-5-default (geeko(a)buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-02-28 04:40:21 +0100 +Linux version 2.6.32.10-0.4-default (geeko(a)buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP 2010-03-29 11:58:05 +0200 +KERNEL supported cpus: + Intel GenuineIntel + AMD AuthenticAMD + NSC Geode by NSC + Cyrix CyrixInstead + Centaur CentaurHauls + Transmeta GenuineTMx86 + Transmeta TransmetaCPU + UMC UMC UMC UMC BIOS-provided physical RAM map: - BIOS-e820: 0000000000000000 - 000000000009f000 (usable) - BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) + BIOS-e820: 0000000000000000 - 000000000009f800 (usable) + BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e5800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fbf0000 (usable) @@ -12,81 +21,128 @@ BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x1fbf0 max_arch_pfn = 0x100000 +MTRR default type: uncachable +MTRR fixed ranges enabled: + 00000-9FFFF write-back + A0000-BFFFF uncachable + C0000-C7FFF write-protect + C8000-DFFFF uncachable + E0000-FFFFF write-protect +MTRR variable ranges enabled: + 0 base 000000000 mask FF0000000 write-back + 1 base 010000000 mask FF8000000 write-back + 2 base 018000000 mask FFC000000 write-back + 3 base 01C000000 mask FFE000000 write-back + 4 base 01E000000 mask FFF000000 write-back + 5 base 01F000000 mask FFF800000 write-back + 6 base 01F800000 mask FFFC00000 write-back + 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 +e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) +Scanning 1 areas for low memory corruption +modified physical RAM map: + modified: 0000000000000000 - 0000000000002000 (usable) + modified: 0000000000002000 - 0000000000006000 (reserved) + modified: 0000000000006000 - 000000000009f800 (usable) + modified: 000000000009f800 - 00000000000a0000 (reserved) + modified: 00000000000dc000 - 00000000000e0000 (reserved) + modified: 00000000000e5800 - 0000000000100000 (reserved) + modified: 0000000000100000 - 000000001fbf0000 (usable) + modified: 000000001fbf0000 - 000000001fbffc00 (ACPI data) + modified: 000000001fbffc00 - 000000001fc00000 (ACPI NVS) + modified: 00000000fffe0000 - 0000000100000000 (reserved) +initial memory mapped : 0 - 00c00000 +init_memory_mapping: 0000000000000000-000000001fbf0000 + 0000000000 - 0000400000 page 4k + 0000400000 - 001f800000 page 2M + 001f800000 - 001fbf0000 page 4k kernel direct mapping tables up to 1fbf0000 @ 7000-d000 -RAMDISK: 1f627000 - 1fbdfdb3 -ACPI: RSDP 000F7560, 0014 (r0 PTLTD ) -ACPI: RSDT 1FBFDAAC, 002C (r1 PTLTD RSDT 6040000 LTP 0) -ACPI: FACP 1FBFFB64, 0074 (r1 IBM 4810-31x 6040000 PTL 1000000) -ACPI: DSDT 1FBFDAD8, 208C (r1 VIA PTL_ACPI 6040000 MSFT 100000B) -ACPI: FACS 1FBFFFC0, 0040 -ACPI: BOOT 1FBFFBD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) +RAMDISK: 1f68a000 - 1fbdf22e +ACPI: RSDP 000f7560 00014 (v00 PTLTD ) +ACPI: RSDT 1fbfdaac 0002C (v01 PTLTD ? RSDT 06040000 LTP 00000000) +ACPI: FACP 1fbffb64 00074 (v01 IBM 4810-31x 06040000 PTL 01000000) +ACPI: DSDT 1fbfdad8 0208C (v01 VIA PTL_ACPI 06040000 MSFT 0100000B) +ACPI: FACS 1fbfffc0 00040 +ACPI: BOOT 1fbffbd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) 0MB HIGHMEM available. 507MB LOWMEM available. mapped low ram: 0 - 1fbf0000 - low ram: 00000000 - 1fbf0000 - bootmap 00002000 - 00005f80 + low ram: 0 - 1fbf0000 + node 0 low ram: 00000000 - 1fbf0000 + node 0 bootmap 00009000 - 0000cf80 (9 early reservations) ==> bootmem [0000000000 - 001fbf0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] - #3 [0000100000 - 0000634a5c] TEXT DATA BSS ==> [0000100000 - 0000634a5c] - #4 [001f627000 - 001fbdfdb3] RAMDISK ==> [001f627000 - 001fbdfdb3] - #5 [0000635000 - 0000638000] INIT_PG_TABLE ==> [0000635000 - 0000638000] - #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] + #3 [0000200000 - 00008bea84] TEXT DATA BSS ==> [0000200000 - 00008bea84] + #4 [001f68a000 - 001fbdf22e] RAMDISK ==> [001f68a000 - 001fbdf22e] + #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] + #6 [00008bf000 - 00008c209a] BRK ==> [00008bf000 - 00008c209a] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] - #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] + #8 [0000009000 - 000000d000] BOOTMAP ==> [0000009000 - 000000d000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001fbf0 HighMem 0x0001fbf0 -> 0x0001fbf0 Movable zone start PFN for each node -early_node_map[2] active PFN ranges - 0: 0x00000000 -> 0x0000009f +early_node_map[3] active PFN ranges + 0: 0x00000000 -> 0x00000002 + 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0001fbf0 -On node 0 totalpages: 129935 -free_area_init_node: node 0, pgdat c050a280, node_mem_map c1000000 +On node 0 totalpages: 129931 +free_area_init_node: node 0, pgdat c0769580, node_mem_map c1001000 + DMA zone: 32 pages used for memmap + DMA zone: 0 pages reserved DMA zone: 3963 pages, LIFO batch:0 - Normal zone: 124829 pages, LIFO batch:31 + Normal zone: 984 pages used for memmap + Normal zone: 124952 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x8008 SMP: Allowing 1 CPUs, 0 hotplug CPUs No local APIC present or hardware disabled -mapped APIC to ffffb000 (01479000) +APIC: disable apic facility +nr_irqs_gsi: 16 +PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 00000000000e6000 PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 -Allocating PCI resources starting at 20000000 (gap: 1fc00000:e03e0000) -PERCPU: Allocating 37916 bytes of per cpu data -NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1 -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128792 -Kernel command line: root=/dev/disk/by-id/ata-Maxtor_4D040H2_D23LF17E-part2 resume=/dev/disk/by-id/ata-Maxtor_4D040H2_D23LF17E-part1 splash=silent vga=0x317 +Allocating PCI resources starting at 1fc00000 (gap: 1fc00000:e03e0000) +Booting paravirtualized kernel on bare hardware +NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 +PERCPU: Embedded 12 pages/cpu @c1400000 s28184 r0 d20968 u4194304 +pcpu-alloc: s28184 r0 d20968 u4194304 alloc=1*4194304 +pcpu-alloc: [0] 0 +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128915 +Kernel command line: root=/dev/disk/by-id/ata-WDC_WD400BB-23JHA1_WD-WMAMA1000905-part3 resume=/dev/disk/by-id/ata-WDC_WD400BB-23JHA1_WD-WMAMA1000905-part2 splash=silent 3 bootsplash: silent mode. +PID hash table entries: 2048 (order: 1, 8192 bytes) +Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) +Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 -PID hash table entries: 2048 (order: 11, 8192 bytes) -TSC: PIT calibration confirmed by PMTIMER. -TSC: using PIT calibration value -Detected 1191.973 MHz processor. -Console: colour dummy device 80x25 -console [tty0] enabled -Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) -Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) -Memory: 503284k/520128k available (2297k kernel code, 16264k reserved, 1925k data, 280k init, 0k highmem) +allocated 2600640 bytes of page_cgroup +please try 'cgroup_disable=memory' option if you don't want memory cgroups +Initializing HighMem for node 0 (00000000:00000000) +Memory: 500028k/520128k available (3228k kernel code, 19492k reserved, 2358k data, 400k init, 0k highmem) virtual kernel memory layout: - fixmap : 0xffdf7000 - 0xfffff000 (2080 kB) + fixmap : 0xffd34000 - 0xfffff000 (2860 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) - vmalloc : 0xe0800000 - 0xff3fe000 ( 491 MB) + vmalloc : 0xe03f0000 - 0xff3fe000 ( 496 MB) lowmem : 0xc0000000 - 0xdfbf0000 ( 507 MB) - .init : 0xc0527000 - 0xc056d000 ( 280 kB) - .data : 0xc033e4f5 - 0xc051fcd0 (1925 kB) - .text : 0xc0100000 - 0xc033e4f5 (2297 kB) + .init : 0xc0775000 - 0xc07d9000 ( 400 kB) + .data : 0xc0527319 - 0xc0774ee8 (2358 kB) + .text : 0xc0200000 - 0xc0527319 (3228 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. -CPA: page pool initialized 1 of 1 pages preallocated -Calibrating delay loop (skipped), value calculated using timer frequency.. 2383.94 BogoMIPS (lpj=4767892) +Hierarchical RCU implementation. +NR_IRQS:2304 nr_irqs:256 +Console: colour VGA+ 80x25 +console [tty0] enabled +Fast TSC calibration using PIT +Detected 1191.909 MHz processor. +Calibrating delay loop (skipped), value calculated using timer frequency.. 2383.81 BogoMIPS (lpj=4767636) kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved Security Framework initialized AppArmor: AppArmor initialized @@ -96,108 +152,102 @@ Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer -CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) -CPU: L2 Cache: 64K (32 bytes/line) +Initializing cgroup subsys net_cls +Performance Events: Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code -Freeing SMP alternatives: 18k freed -ACPI: Core revision 20080609 -ACPI: Checking initramfs for custom DSDT -Parsing all Control Methods: -Table [DSDT](id 0001) - 259 Objects with 34 Devices 66 Methods 12 Regions - tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired +Freeing SMP alternatives: 14k freed +ACPI: Core revision 20090903 ACPI: setting ELCR to 0200 (from 0e00) -evxfevnt-0091 [00] enable : Transition to ACPI mode successful -weird, boot CPU (#0) not listedby the BIOS. +Enabling APIC mode: Flat. Using 0 I/O APICs +weird, boot CPU (#0) not listed by the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs -Total of 1 processors activated (2383.94 BogoMIPS). -CPU0 attaching NULL sched-domain. -net_namespace: 1044 bytes +Total of 1 processors activated (2383.81 BogoMIPS). +devtmpfs: initialized +regulator: core version 0.5 +Time: 21:46:46 Date: 04/13/11 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd7ee, last bus=1 PCI: Using configuration type 1 for base access -perfmon: version 2.82 -perfmon: CPU hotplug support enabled -evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 +bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT -Completing Region/Field/Buffer/Package initialization:................................................ -Initialized 10/12 Regions 3/4 Fields 22/23 Buffers 13/13 Packages (268 nodes) -Initializing Device/Processor/Thermal objects by executing _INI methods: -Executed 0 _INI methods requiring 0 _STA executions (examined 37 objects) -evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 0 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using PIC for interrupt routing +ACPI: No dock devices found. +PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) -PCI: 0000:00:00.0 reg 10 32bit mmio: [fd000000, fdffffff] -PCI: 0000:00:07.1 reg 20 io port: [1840, 184f] -PCI: 0000:00:07.2 reg 20 io port: [1800, 181f] -PCI: 0000:00:07.3 reg 20 io port: [1820, 183f] +pci 0000:00:00.0: reg 10 32bit mmio pref: [0xfd000000-0xfdffffff] +pci 0000:00:07.1: reg 20 io port: [0x1840-0x184f] +pci 0000:00:07.2: reg 20 io port: [0x1800-0x181f] +pci 0000:00:07.3: reg 20 io port: [0x1820-0x183f] pci 0000:00:07.4: quirk: region 6800-687f claimed by vt82c686 HW-mon pci 0000:00:07.4: quirk: region 8100-810f claimed by vt82c686 SMB -PCI: 0000:00:07.5 reg 10 io port: [1000, 10ff] -PCI: 0000:00:07.5 reg 14 io port: [1874, 1877] -PCI: 0000:00:07.5 reg 18 io port: [1870, 1873] -PCI: 0000:00:09.0 reg 10 io port: [1898, 189f] -PCI: 0000:00:09.0 reg 14 io port: [1890, 1897] -PCI: 0000:00:09.0 reg 18 io port: [1888, 188f] -PCI: 0000:00:09.0 reg 1c io port: [1880, 1887] -PCI: 0000:00:09.0 reg 20 io port: [1878, 187f] -PCI: 0000:00:09.0 reg 24 io port: [1850, 185f] -pci 0000:00:09.0: Netmos 9835 (9 parallel, 9 serial); changing class SERIAL to OTHER (use parport_serial) -PCI: 0000:00:0b.0 reg 10 io port: [18c0, 18c7] -PCI: 0000:00:0b.0 reg 14 io port: [18b8, 18bf] -PCI: 0000:00:0b.0 reg 18 io port: [18b0, 18b7] -PCI: 0000:00:0b.0 reg 1c io port: [18a8, 18af] -PCI: 0000:00:0b.0 reg 20 io port: [18a0, 18a7] -PCI: 0000:00:0b.0 reg 24 io port: [1860, 186f] -PCI: 0000:00:0d.0 reg 10 io port: [1400, 14ff] -PCI: 0000:00:0d.0 reg 14 32bit mmio: [fb000000, fb000fff] -PCI: 0000:00:0d.0 reg 30 32bit mmio: [0, ffff] -pci 0000:00:0d.0: supports D1 -pci 0000:00:0d.0: supports D2 +pci 0000:00:07.5: reg 10 io port: [0x1000-0x10ff] +pci 0000:00:07.5: reg 14 io port: [0x1874-0x1877] +pci 0000:00:07.5: reg 18 io port: [0x1870-0x1873] +pci 0000:00:09.0: reg 10 io port: [0x1898-0x189f] +pci 0000:00:09.0: reg 14 io port: [0x1890-0x1897] +pci 0000:00:09.0: reg 18 io port: [0x1888-0x188f] +pci 0000:00:09.0: reg 1c io port: [0x1880-0x1887] +pci 0000:00:09.0: reg 20 io port: [0x1878-0x187f] +pci 0000:00:09.0: reg 24 io port: [0x1850-0x185f] +pci 0000:00:0b.0: reg 10 io port: [0x18c0-0x18c7] +pci 0000:00:0b.0: reg 14 io port: [0x18b8-0x18bf] +pci 0000:00:0b.0: reg 18 io port: [0x18b0-0x18b7] +pci 0000:00:0b.0: reg 1c io port: [0x18a8-0x18af] +pci 0000:00:0b.0: reg 20 io port: [0x18a0-0x18a7] +pci 0000:00:0b.0: reg 24 io port: [0x1860-0x186f] +pci 0000:00:0d.0: reg 10 io port: [0x1400-0x14ff] +pci 0000:00:0d.0: reg 14 32bit mmio: [0xfb000000-0xfb000fff] +pci 0000:00:0d.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] +pci 0000:00:0d.0: supports D1 D2 pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled -PCI: 0000:01:00.0 reg 10 32bit mmio: [fc000000, fc7fffff] -PCI: 0000:01:00.0 reg 14 32bit mmio: [fb100000, fb11ffff] -PCI: 0000:01:00.0 reg 18 32bit mmio: [fb800000, fbffffff] -PCI: 0000:01:00.0 reg 30 32bit mmio: [0, ffff] -pci 0000:01:00.0: supports D1 -pci 0000:01:00.0: supports D2 -PCI: bridge 0000:00:01.0 32bit mmio: [fb100000, fc7fffff] -bus 00 -> node 0 +pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfc7fffff] +pci 0000:01:00.0: reg 14 32bit mmio: [0xfb100000-0xfb11ffff] +pci 0000:01:00.0: reg 18 32bit mmio: [0xfb800000-0xfbffffff] +pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] +pci 0000:01:00.0: supports D1 D2 +pci 0000:00:01.0: PCI bridge to [bus 01-01] +pci 0000:00:01.0: bridge 32bit mmio: [0xfb100000-0xfc7fffff] +pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *9 10 11 12) -Linux Plug and Play Support v0.97 (c) Adam Belay +vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none +vgaarb: loaded +PCI: Using ACPI for IRQ routing +NetLabel: Initializing +NetLabel: domain hash size = 128 +NetLabel: protocols = UNLABELED CIPSOv4 +NetLabel: unlabeled traffic allowed by default +Switching to clocksource tsc +AppArmor: AppArmor Filesystem Enabled pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP -PCI: Using ACPI for IRQ routing -AppArmor: AppArmor Filesystem Enabled system 00:05: iomem range 0x0-0x9ffff could not be reserved system 00:05: iomem range 0xe0000-0xfffff could not be reserved system 00:06: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xfb100000-0xfc7fffff -pci 0000:00:01.0: PREFETCH window: 0x00000020000000-0x000000200fffff +pci 0000:00:01.0: PREFETCH window: 0x20000000-0x200fffff pci 0000:00:01.0: setting latency timer to 64 -bus: 00 index 0 io port: [0, ffff] -bus: 00 index 1 mmio: [0, ffffffff] -bus: 01 index 0 mmio: [0, 0] -bus: 01 index 1 mmio: [fb100000, fc7fffff] -bus: 01 index 2 mmio: [20000000, 200fffff] -bus: 01 index 3 mmio: [0, 0] +pci_bus 0000:00: resource 0 io: [0x00-0xffff] +pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] +pci_bus 0000:01: resource 1 mem: [0xfb100000-0xfc7fffff] +pci_bus 0000:01: resource 2 pref mem [0x20000000-0x200fffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) @@ -205,39 +255,31 @@ TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 -Unpacking initramfs...<7>Switched to high resolution mode on CPU 0 - done -Freeing initrd memory: 5859k freed +pci 0000:00:01.0: disabling DAC on VIA PCI bridge +pci 0000:00:07.0: Disabling VIA external APIC routing +pci 0000:01:00.0: Boot video device +Unpacking initramfs... +Freeing initrd memory: 5460k freed Simple Boot Flag at 0x36 set to 0x1 +Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) -type=2000 audit(1311129780.512:1): initialized +type=2000 audit(1302731206.718:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages -VFS: Disk quotas dquot_6.5.1 +VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) -msgmni has been set to 248 -Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) +msgmni has been set to 246 +alg: No test for stdrng (krng) +Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) -perfmon: added sampling format default -PCI: VIA PCI bridge detected.Disabling DAC. -pci 0000:00:07.0: Disabling VIA external APIC routing -pci 0000:01:00.0: Boot video device -vesafb: framebuffer at 0xfc000000, mapped to 0xe0880000, using 4096k, total 4096k -vesafb: mode is 1024x768x16, linelength=2048, pages=1 -vesafb: protected mode interface info at c000:67c0 -vesafb: pmi: set display start = c00c67d0, set palette = c00c6833 -vesafb: scrolling: redraw -vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 -bootsplash 3.1.6-2004/03/31: looking for picture... -bootsplash: silentjpeg size 59221 bytes -bootsplash: ...found (1024x768, 31358 bytes, v3). -Console: switching to colour frame buffer device 124x44 -fb0: VESA VGA frame buffer device +pci-stub: invalid id string "" isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found -Serial: 8250/16550 driver8 ports, IRQ sharing enabled +Non-volatile memory driver v1.3 +Linux agpgart interface v0.103 +Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A @@ -251,6 +293,7 @@ serial 0000:00:0b.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 0000:00:0b.0: ttyS6 at I/O 0x18c0 (irq = 11) is a 16550A 0000:00:0b.0: ttyS7 at I/O 0x18b8 (irq = 11) is a 16550A +Fixed MDIO Bus: probed PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 @@ -259,252 +302,198 @@ cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode +PM: Checking image partition /dev/disk/by-id/ata-WDC_WD400BB-23JHA1_WD-WMAMA1000905-part2 +PM: Resume from disk failed. registered taskstats version 1 -Freeing unused kernel memory: 280k freed -Write protecting the kernel text: 2300k -Write protecting the kernel read-only data: 1732k -ACPI: CPU0 (power states: C1[C1] C2[C2]) -processor ACPI_CPU:00: registered as cooling_device0 -ACPI: Processor [CPU0] (supports 16 throttling states) -ACPI: No dock devices found. + Magic number: 7:428:803 +Freeing unused kernel memory: 400k freed +Write protecting the kernel text: 3232k +Write protecting the kernel read-only data: 2120k SCSI subsystem initialized libata version 3.00 loaded. -pata_via 0000:00:07.1: version 0.3.3 +pata_via 0000:00:07.1: version 0.3.4 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1848 irq 15 ata1: port disabled. ignoring. -Marking TSC unstable due to TSC halts in idle -ata2.00: ATA-6: Maxtor 4D040H2, DAH017K0, max UDMA/100 +ata2.00: ATA-6: WDC WD400BB-23JHA1, 06.01C06, max UDMA/100 ata2.00: 78156288 sectors, multi 16: LBA ata2.00: limited to UDMA/33 due to 40-wire cable ata2.00: configured for UDMA/33 -scsi 1:0:0:0: Direct-Access ATA Maxtor 4D040H2 DAH0 PQ: 0 ANSI: 5 +scsi 1:0:0:0: Direct-Access ATA WDC WD400BB-23JH 06.0 PQ: 0 ANSI: 5 Uniform Multi-Platform E-IDE driver -BIOS EDD facility v0.16 2004-Jun-25, 2 devices found +Marking TSC unstable due to TSC halts in idle +Switching to clocksource acpi_pm +BIOS EDD facility v0.16 2004-Jun-25, 1 devices found udevd version 128 started -sd 1:0:0:0: [sda] 78156288 512-byte hardware sectors: (40.0GB/37.2GiB) +sd 1:0:0:0: [sda] 78156288 512-byte logical blocks: (40.0 GB/37.2 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA -sd 1:0:0:0: [sda] 78156288 512-byte hardware sectors: (40.0GB/37.2GiB) -sd 1:0:0:0: [sda] Write Protect is off -sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 -sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA - sda:<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 -ata2.00: BMDMA stat 0x24 -ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in - res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) -ata2.00: status: { DRDY ERR } -ata2.00: error: { ICRC ABRT } -ata2: soft resetting link + sda: sda1 sda2 sda3 +sd 1:0:0:0: [sda] Attached SCSI disk usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb -USB Universal Host Controller Interface driver v3.0 +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver +uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 9, io base 0x00001800 -usb usb1: configuration #1 chosen from 1 choice -hub 1-0:1.0: USB hub found -hub 1-0:1.0: 2 ports detected -ata2.00: configured for UDMA/33 -ata2: EH complete -ata2.00: limiting speed to UDMA/25:PIO4 -ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 -ata2.00: BMDMA stat 0x24 -ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in - res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) -ata2.00: status: { DRDY ERR } -ata2.00: error: { ICRC ABRT } -ata2: soft resetting link usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller -usb usb1: Manufacturer: Linux 2.6.27.19-5-default uhci_hcd +usb usb1: Manufacturer: Linux 2.6.32.10-0.4-default uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 +usb usb1: configuration #1 chosen from 1 choice +hub 1-0:1.0: USB hub found +hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:07.3: UHCI Host Controller uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.3: irq 9, io base 0x00001820 -usb usb2: configuration #1 chosen from 1 choice -hub 2-0:1.0: USB hub found -hub 2-0:1.0: 2 ports detected -ata2.00: configured for UDMA/25 -ata2: EH complete -usb 1-1: new full speed USB device using uhci_hcd and address 2 -ata2.00: limiting speed to PIO4 -ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 -ata2.00: BMDMA stat 0x24 -ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in - res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) -ata2.00: status: { DRDY ERR } -ata2.00: error: { ICRC ABRT } -ata2: soft resetting link usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller -usb usb2: Manufacturer: Linux 2.6.27.19-5-default uhci_hcd +usb usb2: Manufacturer: Linux 2.6.32.10-0.4-default uhci_hcd usb usb2: SerialNumber: 0000:00:07.3 -ata2.00: configured for PIO4 -ata2: EH complete -sd 1:0:0:0: [sda] 78156288 512-byte hardware sectors: (40.0GB/37.2GiB) -sd 1:0:0:0: [sda] Write Protect is off -sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 -sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA - sda1 sda2 -sd 1:0:0:0: [sda] Attached SCSI disk -sd 1:0:0:0: [sda] 78156288 512-byte hardware sectors: (40.0GB/37.2GiB) -sd 1:0:0:0: [sda] Write Protect is off -sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 -sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA -sda: detected capacity change from 0 to 40016019456 -usb 1-1: configuration #1 chosen from 1 choice -usb 1-1: New USB device found, idVendor=090c, idProduct=1000 -usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 -usb 1-1: Product: USB DISK -usb 1-1: Manufacturer: SMI Corporation -usb 1-1: SerialNumber: AAD7593000008325 -usb 1-2: new full speed USB device using uhci_hcd and address 3 -usb 1-2: configuration #1 chosen from 1 choice -usb 1-2: New USB device found, idVendor=0984, idProduct=0066 -usb 1-2: New USB device strings: Mfr=74, Product=57, SerialNumber=44 -usb 1-2: Product: USB_MultiBurner3 -usb 1-2: Manufacturer: Lenovo -usb 1-2: SerialNumber: 070801035989 +usb usb2: configuration #1 chosen from 1 choice +hub 2-0:1.0: USB hub found +hub 2-0:1.0: 2 ports detected usb 2-1: new full speed USB device using uhci_hcd and address 2 -usb 2-1: configuration #1 chosen from 1 choice -hub 2-1:1.0: USB hub found -hub 2-1:1.0: 4 ports detected -PM: Starting manual resume from disk usb 2-1: New USB device found, idVendor=04b3, idProduct=3016 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB 1.1 2 port downstream low-power hub usb 2-1: Manufacturer: Lite-On Tech +usb 2-1: configuration #1 chosen from 1 choice +hub 2-1:1.0: USB hub found +hub 2-1:1.0: 4 ports detected +PM: Marking nosave pages: 0000000000002000 - 0000000000006000 +PM: Marking nosave pages: 000000000009f000 - 0000000000100000 +PM: Basic memory bitmaps created +PM: Basic memory bitmaps freed +PM: Starting manual resume from disk +PM: Resume from partition 8:2 +PM: Checking hibernation image. +PM: Error -22 checking image file +PM: Resume from disk failed. usb 2-1.3: new low speed USB device using uhci_hcd and address 3 -usb 2-1.3: configuration #1 chosen from 1 choice usb 2-1.3: New USB device found, idVendor=04b3, idProduct=3019 usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.3: Product: IBM USB Travel Keyboard with UltraNav usb 2-1.3: Manufacturer: Lite-On Tech +usb 2-1.3: configuration #1 chosen from 1 choice +usbcore: registered new interface driver hiddev +input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1.3/2-1.3:1.0/input/input0 +generic-usb 0003:04B3:3019.0001: input,hidraw0: USB HID v1.00 Keyboard [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:07.3-1.3/input0 +input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1.3/2-1.3:1.1/input/input1 +generic-usb 0003:04B3:3019.0002: input,hidraw1: USB HID v1.00 Device [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:07.3-1.3/input1 +usbcore: registered new interface driver usbhid +usbhid: v2.6:USB HID core driver usb 2-1.4: new low speed USB device using uhci_hcd and address 4 -usb 2-1.4: configuration #1 chosen from 1 choice +kjournald starting. Commit interval 15 seconds +EXT3 FS on sda3, internal journal +EXT3-fs: mounted filesystem with ordered data mode. usb 2-1.4: New USB device found, idVendor=06cb, idProduct=0009 usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.4: Product: Composite TouchPad / TrackPoint usb 2-1.4: Manufacturer: Synaptics Inc. -usbcore: registered new interface driver hiddev -input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1.3/2-1.3:1.0/input/input0 -input,hidraw0: USB HID v1.00 Keyboard [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:07.3-1.3 -input: Lite-On Tech IBM USB Travel Keyboard with UltraNav as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1.3/2-1.3:1.1/input/input1 -input,hidraw1: USB HID v1.00 Device [Lite-On Tech IBM USB Travel Keyboard with UltraNav] on usb-0000:00:07.3-1.3 +usb 2-1.4: configuration #1 chosen from 1 choice input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1.4/2-1.4:1.0/input/input2 -input,hidraw2: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:07.3-1.4 -kjournald starting. Commit interval 5 seconds -EXT3 FS on sda2, internal journal -EXT3-fs: mounted filesystem with ordered data mode. +generic-usb 0003:06CB:0009.0003: input,hidraw2: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:07.3-1.4/input0 input: Synaptics Inc. Composite TouchPad / TrackPoint as /devices/pci0000:00/0000:00:07.3/usb2/2-1/2-1.4/2-1.4:1.1/input/input3 -input,hidraw3: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:07.3-1.4 -usbcore: registered new interface driver usbhid -usbhid: v2.6:USB HID core driver +generic-usb 0003:06CB:0009.0004: input,hidraw3: USB HID v1.00 Mouse [Synaptics Inc. Composite TouchPad / TrackPoint] on usb-0000:00:07.3-1.4/input1 udevd version 128 started -sd 1:0:0:0: Attached scsi generic sg0 type 0 -Linux agpgart interface v0.103 -Initializing USB Mass Storage driver... -scsi2 : SCSI emulation for USB Mass Storage devices -scsi3 : SCSI emulation for USB Mass Storage devices -usbcore: registered new interface driver usb-storage -USB Mass Storage support registered. -usb-storage: device found at 3 -usb-storage: waiting for device to settle before scanning -usb-storage: device found at 2 -usb-storage: waiting for device to settle before scanning +input: PC Speaker as /devices/platform/pcspkr/input/input4 agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset agpgart-via 0000:00:00.0: AGP aperture is 16M @ 0xfd000000 +sd 1:0:0:0: Attached scsi generic sg0 type 0 +natsemi dp8381x driver, version 2.1, Sept 11, 2006 + originally by Donald Becker <becker(a)scyld.com> + 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder +natsemi 0000:00:0d.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 +natsemi eth0: NatSemi DP8381[56] at 0xfb000000 (0000:00:0d.0), 00:0d:60:02:8b:98, IRQ 9, port TP. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 -input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 -ACPI: Power Button (FF) [PWRF] -input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 -shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 +input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 +ACPI: Power Button [PWRB] +input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 +ACPI: Power Button [PWRF] parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] -ACPI: Power Button (CM) [PWRB] -scsi 2:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS -sd 2:0:0:0: [sdb] 15663104 512-byte hardware sectors: (8.01GB/7.46GiB) -scsi 3:0:0:0: CD-ROM LENOVO USB_MultiBurner3 NL31 PQ: 0 ANSI: 0 -scsi 3:0:0:0: Attached scsi generic sg1 type 5 -usb-storage: device scan complete -sd 2:0:0:0: [sdb] Write Protect is off -sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 -sd 2:0:0:0: [sdb] Assuming drive cache: write through -parport_pc: VIA parallel port: io=0x378, irq=7 -sd 2:0:0:0: [sdb] 15663104 512-byte hardware sectors: (8.01GB/7.46GiB) -sd 2:0:0:0: [sdb] Write Protect is off -sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 -sd 2:0:0:0: [sdb] Assuming drive cache: write through - sdb: sdb1 -sd 2:0:0:0: [sdb] Attached SCSI removable disk -sd 2:0:0:0: Attached scsi generic sg2 type 0 -usb-storage: device scan complete +shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 +rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 +rtc0: alarms up to one year, y3k, 242 bytes nvram vt596_smbus 0000:00:07.4: SMBUS: Error: Host SMBus controller not enabled! - upgrade BIOS or use force=1 -natsemi dp8381x driver, version 2.1, Sept 11, 2006 - originally by Donald Becker <becker(a)scyld.com> - 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder -natsemi 0000:00:0d.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 -natsemi eth0: NatSemi DP8381[56] at 0xfb000000 (0000:00:0d.0), 00:0d:60:02:8b:98, IRQ 9, port TP. -input: PC Speaker as /devices/platform/pcspkr/input/input6 +parport_pc: VIA parallel port: io=0x378, irq=7 +ppdev: user-space parallel port driver ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 VIA 82xx Audio 0000:00:07.5: setting latency timer to 64 -rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 -rtc0: alarms up to one year, y3k -ppdev: user-space parallel port driver -sr0: scsi-1 drive -Uniform CD-ROM driver Revision: 3.20 -sr 3:0:0:0: Attached scsi CD-ROM sr0 -Adding 2096472k swap on /dev/sda1. Priority:-1 extents:1 across:2096472k +Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k device-mapper: uevent: version 1.0.3 -device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel(a)redhat.com +device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel(a)redhat.com loop: module loaded -- js suse labs -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |