Prev: Logging issue in CiscoSecure ACS 4.2
Next: IP CLASSLESS not working
From: HangaS on 5 May 2008 05:22
On Apr 30, 6:53 pm, Merv <merv.hr...(a)rogers.com> wrote:
> On Apr 30, 1:16 pm, HangaS <mafo...(a)gmail.com> wrote:
>
> > I did a few searches before I post,
> > but I guess I ruled out the firmware version issue cos the router is
> > brand new with a recent manufacture date.
>
> > I don't have it in front of me 'till monday, nor I remember the IOS
> > version atm.
> > I just now it has Advanced IP services option.
>
> > I was pretty convinced it was some ATM configuration issue I was
> > missing, but I'll check the ADSL firmware
> > issue as soon as I can.
>
> Post the output of show version as that info will be helpful for
> responders
>
> Also output of show dsl int atm 0

Hi,

I only now got the oportunity to get back to this and check the
version of the ADSL firmware.

Looks like I'm running a pretty old version, despite the router is
brand new and manufactured in 11-Jan-08.

I'll try with 3.0.10 as it is the latest available on ftp://ftp.cisco.com/pub/access/800
to see how it goes.

Thanks


c877#show version
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version
12.4(6)T9, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 09-Oct-07 18:56 by khuie

ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE



c877#show dsl int atm 0
ATM0
Alcatel 20190 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.5 (ADSL2+) Annex A
ITU STD NUM: 0x03 0x2
Chip Vendor ID: 'STMI' 'BDCM'
Chip Vendor Specific: 0x0000 0x918F
Chip Vendor Country: 0x0F 0xB5
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x0000 0x0000
Modem Vendor Country: 0xB5 0x00
Serial Number Near: FHK1202252L
Serial Number Far:
Modem Version Near: 12.4(6)T9
Modem Version Far:
Capacity Used: 49% 100%
Noise Margin: 19.0 dB 10.5 dB
Output Power: 19.5 dBm 12.0 dBm
Attenuation: 54.0 dB 20.0 dB
Defect Status: None
None
Last Fail Code: None
Watchdog Counter: 0x88
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0x00
Interrupts: 22976 (0 spurious)
PHY Access Err: 0
Activations: 1
LED Status: ON
LED On Time: 100
LED Off Time: 100
Init FW: embedded
Operation FW: embedded
FW Version: 2.5.42

DS Channel1 DS Channel0 US Channel1 US
Channel0
Speed (kbps): 0 3061
0 747
Cells: 0 0 0
114975
Reed-Solomon EC: 0 0
0 0
CRC Errors: 0 0
0 0
Header Errors: 0 0
0 0
Total BER: 0E-0 0E-0
Leakage Avarage BER: 0E-0 0E-0
Interleave Delay: 0 4
0 4

LOM Monitoring : Disabled


DMT Bits Per Bin
000: 0 0 0 0 0 0 0 6 9 A A B B C C C
010: C C C C C C C C B B B B A A A A
020: 0 2 2 4 5 5 5 6 6 6 5 5 5 5 6 5
030: 5 5 5 7 7 8 8 8 8 8 8 8 8 8 2 7
040: 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
050: 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
060: 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
070: 6 6 6 6 6 6 6 6 6 6 6 6 5 5 5 6
080: 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
090: 5 5 2 4 5 5 5 5 5 5 5 5 5 5 5 5
0A0: 5 5 5 5 5 5 5 5 5 5 5 4 5 5 5 5
0B0: 4 4 4 4 4 4 4 4 4 4 4 5 5 4 4 4
0C0: 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2 4
0D0: 4 4 2 2 4 4 4 4 4 4 4 4 4 4 2 2
0E0: 2 2 0 0 0 2 2 2 2 2 2 2 2 2 2 2
0F0: 2 2 2 2 2 2 4 2 2 2 4 4 2 4 2 4
100: 2 4 2 2 2 2 2 2 2 2 2 2 2 2 2 2
110: 2 2 2 2 2 2 2 2 2 2 2 2 2 2 0 2
120: 2 2 0 2 2 2 0 0 0 0 0 0 0 0 0 0
130: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
140: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
150: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
160: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
170: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
180: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
190: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1A0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1B0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1C0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1D0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1E0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1F0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

DSL: Training log buffer capability is not enabled
From: Merv on 5 May 2008 06:37
On May 5, 5:22 am, HangaS <mafo...(a)gmail.com> wrote:
> On Apr 30, 6:53 pm, Merv <merv.hr...(a)rogers.com> wrote:
>
>
>
> > On Apr 30, 1:16 pm, HangaS <mafo...(a)gmail.com> wrote:
>
> > > I did a few searches before I post,
> > > but I guess I ruled out the firmware version issue cos the router is
> > > brand new with a recent manufacture date.
>
> > > I don't have it in front of me 'till monday, nor I remember the IOS
> > > version atm.
> > > I just now it has Advanced IP services option.
>
> > > I was pretty convinced it was some ATM configuration issue I was
> > > missing, but I'll check the ADSL firmware
> > > issue as soon as I can.
>
> > Post the output of show version as that info will be helpful for
> > responders
>
> > Also output of show dsl int atm 0
>
> Hi,
>
> I only now got the oportunity to get back to this and check the
> version of the ADSL firmware.
>
> Looks like I'm running a pretty old version, despite the router is
> brand new and manufactured in 11-Jan-08.
>
> I'll try with 3.0.10 as it is the latest available onftp://ftp.cisco.com/pub/access/800
> to see how it goes.
>
> Thanks
>
> c877#show version
> Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version
> 12.4(6)T9, RELEASE SOFTWARE (fc2)
> Technical Support:http://www.cisco.com/techsupport
> Copyright (c) 1986-2007 by Cisco Systems, Inc.
> Compiled Tue 09-Oct-07 18:56 by khuie
>
> ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE


IOS version 12.4(6)T9 has been deferred by Cisco ( read junked)

From: HangaS on 5 May 2008 08:23
On May 5, 11:37 am, Merv <merv.hr...(a)rogers.com> wrote:

Problem solved, thanks!
Maybe I'll upgrade the IOS later.
I just don't understand how a device assambled in Jan 08 was fitted
with a rather old software image.

Just so it may help other users that come across the same issue as me
this is what happened.

I was replacing the modem supplied with the Vodafone PT ADSL2+ Service
with a Cisco 877 but I was only getting
about half the bandwith I could get with the supplied modem.

The solution was to upgrade the DSL firmware to version 3.0.10

You can get the firmware at ftp://ftp.cisco.com/pub/access/800

Thanks Merv by the tips!

>
> IOS version 12.4(6)T9 has been deferred by Cisco  ( read junked)- Hide quoted text -
>
> - Show quoted text -

From: Merv on 5 May 2008 12:14
On May 5, 8:23 am, HangaS <mafo...(a)gmail.com> wrote:
> On May 5, 11:37 am, Merv <merv.hr...(a)rogers.com> wrote:
>
> Problem solved, thanks!
> Maybe I'll upgrade the IOS later.
> I just don't understand how a device assambled in Jan 08 was fitted
> with a rather old software image.
>
> Just so it may help other users that come across the same issue as me
> this is what happened.
>
> I was replacing the modem supplied with the Vodafone PT ADSL2+ Service
> with a Cisco 877 but I was only getting
> about half the bandwith I could get with the supplied modem.
>
> The solution was to upgrade the DSL firmware to version 3.0.10
>
> You can get the firmware atftp://ftp.cisco.com/pub/access/800
>
> Thanks Merv by the tips!
>
>
>
> > IOS version 12.4(6)T9 has been deferred by Cisco ( read junked)- Hide quoted text -
>
> > - Show quoted text -


Out of curiosity, what are you getting now in terms of bandwidth ?

From: HangaS on 5 May 2008 13:33
On May 5, 5:14 pm, Merv <merv.hr...(a)rogers.com> wrote:

> Out of curiosity, what are you getting now in terms of bandwidth ?- Hide quoted text -


The max I could get was 7.6Mbps, (we have contracted 12Mbps) but the
wire loopback test done by the install technitian rated only 7.6 due
to distance (I was expecting this)

But altough the new firmware doubled the previous bandwith look's like
its not 100% yet
the DS field of show dsl int atm 0 reports 6135 only (90% capacity
used)

Also the contracted uplink should be 768Kbps and I'm getting 747

I can download from the ISP mirrors @~620KB/s


As you can see in the show dsl command,I've upgraded the IOS, which
comes with dsl 3.0.14 embeded expecting to get 100% but that didn't
help. I can live with 90% for now. But I might come back to this
latter.



c877#show dsl interface atm0
ATM0
Alcatel 20190 chipset information
ATU-R (DS) ATU-C (US)
Modem Status: Showtime (DMTDSL_SHOWTIME)
DSL Mode: ITU G.992.5 (ADSL2+) Annex A
ITU STD NUM: 0x03 0x2
Chip Vendor ID: 'STMI' 'BDCM'
Chip Vendor Specific: 0x0000 0x918F
Chip Vendor Country: 0x0F 0xB5
Modem Vendor ID: 'CSCO' ' '
Modem Vendor Specific: 0x0000 0x0000
Modem Vendor Country: 0xB5 0x00
Serial Number Near: FHK1202252L
Serial Number Far:
Modem VerChip ID: C196 (0)
DFE BOM: DFE3.0 Annex A (1)
Capacity Used: 90% 100%
Noise Margin: 9.0 dB 14.5 dB
Output Power: 19.0 dBm 12.0 dBm
Attenuation: 42.0 dB 20.0 dB
Defect Status: None
None
Last Fail Code: None
Watchdog Counter: 0x33
Watchdog Resets: 0
Selftest Result: 0x00
Subfunction: 0x00
Interrupts: 8269 (0 spurious)
PHY Access Err: 0
Activations: 1
LED Status: ON
LED On Time: 100
LED Off Time: 100
Init FW: init_AMR-3.0.014_no_bist.bin
Operation FW: AMR-3.0.014.bin
FW Source: embedded
FW Version: 3.0.14

DS Channel1 DS Channel0 US Channel1 US
Channel0
Speed (kbps): 0 6135
0 747
Cells: 0 150828 0
10402034
Reed-Solomon EC: 0 916
0 0
CRC Errors: 0 26
0 0
Header Errors: 0 24
0 0
Total BER: 0E-0 4174E-10
Leakage Average BER: 0E-0 4182E-10
Interleave Delay: 0 0
0 0
ATU-R (DS) ATU-C (US)
Bitswap: enabled enabled
Bitswap success: 0 0
Bitswap failure: 0 0

LOM Monitoring : Disabled


DMT Bits Per Bin
000: 0 0 0 0 0 0 0 7 9 9 A B B B C C
010: C C C C C C C C C B B B B A A 9
020: 0 5 6 7 8 9 8 9 9 9 9 9 9 9 9 9
030: 9 9 9 B B B B C C C C C C C B B
040: B B B 2 B B B B B A B B A A A B
050: B B B B B B A A A A A A A A A A
060: A A A A A A A A A 9 9 9 A 9 9 A
070: A A 9 A A A A 9 A 9 9 9 9 9 9 9
080: 9 9 9 9 9 9 9 9 9 9 8 9 9 9 9 9
090: 9 8 5 8 8 8 8 8 8 8 8 8 8 8 9 8
0A0: 8 8 8 9 9 9 9 8 8 8 8 8 8 8 8 8
0B0: 8 8 8 8 8 8 8 7 7 8 8 8 8 8 8 8
0C0: 8 8 7 7 7 7 8 7 7 7 7 7 7 7 7 7
0D0: 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 6
0E0: 6 6 5 2 2 5 6 7 5 6 6 7 7 7 7 7
0F0: 6 6 6 7 7 6 7 7 7 7 7 7 7 7 7 7
100: 7 7 7 7 7 7 7 7 7 7 7 6 6 6 6 6
110: 6 6 6 6 6 6 6 5 5 5 5 5 5 5 5 5
120: 5 5 4 4 4 4 4 3 4 4 4 4 4 4 4 3
130: 2 3 2 2 3 2 2 2 2 2 2 2 2 2 2 2
140: 2 2 2 2 2 2 0 2 2 2 2 0 0 0 0 0
150: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
160: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
170: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
180: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
190: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1A0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1B0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1C0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1D0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1E0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1F0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

DSL: Training log buffer capability is not enabled
 | 
Pages: 1
Prev: Logging issue in CiscoSecure ACS 4.2
Next: IP CLASSLESS not working