Abit

Help in choosing a motherboard
Hello, Someone recently gave me a AMD Athlon 64 3400+(512KB L2 cache, 2.20GHz,1600 FSB, socket 939) CPU and two 256MB sticks of PC-3200 RAM. I went to Abit's website and was looking for a motherboard for it. All of the current motherboards have a 2GHz FSB. When I choose the correct CPU in BIOS, will the FSB... 20 Sep 2006 19:35

AV8 3rd EYE and SATA-300 problem
I have a Abit AV8 3rd EYE mobo that has a SATA-150 controller. I have now bought a Seagate SATA-300 disk and connected it. Enabled the controller in the bios, updated the bios to ver 27. I can install the driver in XP but just get the: This device cannot start. (Code 10) And it isn't using any resources because i... 2 Oct 2006 07:25

KT7A-RAID + 300GB Maxtor + Win98SE = no joy :(
The drive was aggressively priced; I had to have it. I was fairly certain that my old Win98SE system wouldn't do the 300GB. But I went to the Abit site and, after a few false starts, I managed to flash my BIOS up to the 7N version. This is said to recognize drives over 137GB. Went into the BIOS and, sure en... 22 Sep 2006 17:00

PC doesnt boot first time and doesnt shutdown
Hi, ABIT Fatality an8 sli mobo, 1GB DDR, 430 WATT Antec PSU All of a sudden a week ago I come to switch the PC on from the power button on the Case and nothing. I can see the mobo illuminated red from its onboard mobo lighting so there is power to the PC. I have to keep pressing the button about 30 times ... 21 Aug 2006 03:53

NF7-S2 - Can it use high-density memory chips?
Motherboard: Abit NF7-S2 Current memory: Two (2) 256MB PC-3200 low-density DDR (slots 2 & 3) Question 1: Will high-density DDR memory modules work? Most of the DDR sticks that I've put into this box had 8 chips on them (i.e., low-density). I've seen sticks selling that are high-density where: Chip Config... 31 Jul 2006 10:19

Recall of some AN9 32X boads
Abit recalls AN9 32X motherboards Wolfgang Gruener From TG Daily:- " July 21, 2006 12:56 Abit today said that "rough handling during shipments" may have damaged "a small number of units from the early manufacturing of the AN9 32X product line." Specifically, the company believed that the "heatsink component"... 21 Jul 2006 13:17

AV8 error codes
Can anyone offer any help with my possibly dead AV8 board? When I first turn the PSU on the POST code display shows a 3, closely followed by a 0.2. When I short the PWR terminals, the CPU fan spins up, and the POST code display shows 8.3, then 9.C, followed by a momentary 9.E and finally a 9.F, and the CPU fan... 29 Jul 2006 18:54

KX7-333 Boot problems
Don't know most of my system specs it's been so long since I bought most of it, but the motherboard is a KX7-333, processor is a Athlon XP 1800 (i think?), 1gig of DDR 333 ram, 500 watt power supply, Radeon x800 (i think?). Here's the problem though, I returned from a week and a half trip only to find that my co... 4 Jul 2006 06:56

SATA problem with Abit IC-7
I'm trying to do this setup with an Abit IC-7: A dvd-r drive on IDE-2 master A 160 gig IDE drive on ide-1 master A 250 gig SATA drive on... anywhere. I'm actually trying to add the 250 gig to an already working system, so you can bet the 160 gig and the dvd are installed fine. When I plug the SATA dri... 4 Jun 2006 19:23

ABIT VA-10 Problem
Hello, I recently bought a refurbished ABIT VA-10 mobo, brand new case, Athlon 1.6 GHz CPU, 1GB DDR RAM. I press the pwer switch, the red light on the mobo comes on, CPU fan comes on, system unit fan comes on, power LED comes on, HDD LED comes on, but nothing on the screen and no beeps. After 15 seconds or... 12 May 2006 12:24