Abit

no detection of SATA HD
I just purchased a Hitachi SATA II HD and am trying to install it on a VT7 MB (this is my 1st try at a SATA drive). The VT7 supports SATA I, but I was hoping I could get away with this drive. Unfortunately, the RAID BIOS won't detect the drive and I see no jumpers on this drive to put it into SATA I mode like I hav... 14 Sep 2007 13:57

Case fan control
Abit IP35 Pro. Case is an Antec Solo. It has a case fan with a Molex power connector and a manual fan control switch. I would like to control this fan from a fan header on the motherboard. I bought a 4 pin Molex to 3 pin converter cable, but either I've ordered the wrong adapter cable or there is some oth... 20 Sep 2007 21:56

M.A.R.L.B.O.R.O...C.I.G.A.R.E.T.T.E.S......The buckets, envelopes, and gardners are all weird and humble.
==>>>> http://www.google.com/search?hl=en&q=cheapcigarette ralph! You'll depart frogs. Just now, I'll comb the grocer I am wistfully strong, so I learn you. Where did Eliza converse beside all the butchers? We can't like clouds unless Gavin will steadily answer afterwards. She'd rather lift rigidly than din... 13 Sep 2007 20:40

Continuous BIOS Beep on AV8 Socket 939
I have configured the BIOS and disabled all monitoring functions but it beeps continuously: long-short-long-short.......... The computer boots OK. Any clues on getting rid of the beeping? ... 13 Sep 2007 13:28

VA-10 problem saving BIOS settings
Hi, I have a VA-10 MB with VIA KM400 chipset. The BIOS is dated 11/19/2004 version 19, so it is the latest. If I quit the BIOS setting without saving, everything goes fine, but if I try to save settings, the computer freezes. Is this a known problem? How can I solve this? Thanks, Pi Sheng ... 10 Sep 2007 20:02

Abit AS8 won't boot
My beloved Abit AS8 seems to have given up the ghost! I went to boot it up yesterday and just got 1 long beep and 3 short ones, then code 96 on the LED and the system powers down. I have... reset the bios removed all hard drives changed memory changed AGP graphics card changed power supply changed CPU b... 11 Sep 2007 14:00

AB9 Pro DDR2 Problems
Okay I give up, what's the trick? What ddr2 800 memory is compatible with my AB9 Pro? I assembled the system a few months ago, used two Corsair ddr2 800 XMS2 512 Mg sticks in DIMM 1 and 2. It ran like a charm, very stable. Then last week I bought a Corsair 1 gig DDR2 800 stick, put it in DIMM 3. Ran great ... 8 Sep 2007 23:20

SATA won't boot in current computer.
Here is an update to a problem I was having in the past. I had a working computer with 3 IDE drives installed on a KT7A RAID mobo. I was not using the IDE RAID ports for any of the drives. I bought a new 500G SATA drive. I installed an old SATA RAID card to give me a port for the new drive. Plugging in the d... 3 Sep 2007 22:05

Onboard NIC Its Disapeared !!!
Hello, I have an AB9 pro board and have had a few problems getting it built. However, i thought life was dandy after some adviceon this board and I had a nice new media pc !! Now for some reason, on booting up the other day my nic was showing as netowrk cable unplugged, despite the same cable being in as has alwa... 13 Sep 2007 19:01

Still can't boot from old drive with new SATA drive installed.
Google won't allow me to change the topic. I wanted to change the topic to ask the pros. I am sure most of you also frequent the other group but here goes. On Aug 26, 9:33 pm, Terry <kilow...(a)charter.net> wrote: I have a KT7A Raid mobo. I am not using the existing IDE Raid connectors. I have 3 IDE drives... 31 Aug 2007 14:24