Abit

Abit KV7-V odour
I picked up this board used. It was terribly filthy and had some sort of a chemical smell. Washed it in soap & water, dried it thoroughly. The smell is worse.If I touch it, the smell sticks to my hand takes a lot of washing. I am guessing that it will get worse when the computer runs and spews forth these chemical ... 22 Oct 2007 17:11

Does AV8 support X2 Toledo 4400+?
I have a AV8 with BIOS updated to 2/23/06 and 3200+ Venice. Would I be able to upgrade to a X2 Toledo 4400+? ... 20 Oct 2007 21:47

NF7 keep giving ambulance sound
I've experienced this before and it was the overtemperature alarm. Try opening up your pc and vauum cleaning out any dust that is blocking the fans - especially CPU fan. "Rosli" <rosli.shafiee(a)gmail.com> skrev i melding news:46ba6d14_1(a)news.tm.net.my... I've NF7 Motherboard which is giving a sound like an... 20 Oct 2007 10:13

Abit VL6 socket 370 board
Hello, I have "inherited" this board. It's a few years old so it's difficult to find much information about it. Where can I find the specs? What's the top CPU I can fit, I think it is a 1GHz Pentium 3. Is that right. I'm confused about the max. memory as different web sites have said different things. It's ... 10 Nov 2007 08:15

Ethernet driver name NF7-2?
Replaced BIOS battery now system can't find the driver for the onboard Ethernet "LAN" controller. I believe it is a NVIDA nforce2 driver, any idea what the name of it is and where it may be found? ***************** Thank You kGbAT(a)msbx.net To reply to this email please remove the AT after the kGb in the reply ... 18 Oct 2007 07:30

GMCFESIL: (Guy Macon's Cure For Electronics Soaked In Liquids)
Reed Scarce wrote: What can I use to clean out a rotary switch? It's usable but sticky from a sugar solution. Here's the story: A couple of months ago I was carrying my multimeter in a canvas bag with a "big gulp." The Coke spilled out and soaked the multimeter good. As soon as I discovered th... 17 Oct 2007 13:53

BIOS FLASH Gone bad - IC7-G - New BIOS Chip
Thanks in advance to this group of techies. My Buddy flashed his Abit IC7-G that was running great with a P4 3.2, 1 Gig of Kingston, WD Sata, GF4 128 AGP, Plextor DVD burner, 450 Watt PC Power and Cooling PS. After what appeared to be a successful flash, he rebooed and Nothing. No video. Powers up the CPU f... 10 Nov 2007 08:15

AA8 duramax gives post 9.0 after BIOS upgrade
According to the Abit web site, the latest BIOS for the AA8 Duramax is aa826.zip which I downloaded, unzipped and copied to a bootable DOS floppy. I booted from the floppy and ran RUNME.BAT which ran showing no errors (and showed the flashing to have worked) and the end said 'Remove Floppy Disk and press F1 to cont... 15 Oct 2007 04:58

Who has experience with the IP35 Pro?
hello NG, for my new PC which I will assamble shortly the Abit IP35 Pro is a hot candidate. Does anyone know this board well and could tell me the good sides (and, if there are any, also the "bad" sides)? One thing that worries me a bit is that there are only 4 USB ports - this seems a little low number of por... 10 Nov 2007 08:15

IP 35Pro - one or two LAN connectors
hello NG, I am somewhat puzzled by the descripton of this board on the ABIT homepage: http://www2.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=IP35+Pro&fMTYPE=LGA775 They say "On board Dual Gigabit LAN controller supports 10/100/1000M Ethernet", and further down under Back Panel I/O they s... 10 Oct 2007 14:35