Abit
in [Hardware]
|
PSU Hacking http://www.pcguide.com/ref/power/sup/parts_Motherboard.htm short the Power On pin to ground. -- - - - - - - - - - - - - - - - - Bill Graves RKBA! bgraves(a)ix.netcom.com "Dylan C" <nospam(a)nospam.com> wrote in message news:12rum7i7gmrej4a(a)corp.supernews.com... Lets say I was building some sort of electronic ... 30 Jan 2007 10:23
Two question about the KV8 Pro SATA and Latest BIOS I have two WD 250 G SATA Drives that were setup for a Creative I/O Raid controller that I used in my KT7A. The OnChip SATA Raid doesn't see them. When I hit the TAB key on boot up the BIOS says there are no drives. The Driver is installed and working properly. To check the drives, I installed the, Creative I... 27 Jan 2007 12:43
Want to Upgrade from IC7-G Hey I got a brown spot inside my case using the ic7-g.....now you got me thinking. BTW Brown spot is hard and crusty. On Sat, 25 Nov 2006 07:24:55 -0600, "CareBear" <CareBear(a)Anywhere.USA> wrote: "Amir Facade" <im.amir.facade(a)gmail.com> wrote in message news:vf6dnWsoi_DN3PXYnZ2dnUVZ_vmdnZ2d(a)rcn.ne... 26 Jan 2007 20:58
A very sad tale......... See:- http://www.anandtech.com/mb/showdoc.aspx?i=2911 There was a time when buying an Abit board was a near 100% guarantee of a first-quality product even when first shipped. I bought one of the very first IC7-G motherboards; still in one of my PCs --- nary a problem, updated the BIOS a couple of times for ve... 3 Feb 2007 13:45
abit nf7-s v.2.0 I have that motherboard, i would like because my dimm 1 GB DDR 400 only detect 512 RAM. That memory has chips by 2 sides of memory. byes from spain. ... 15 Jan 2007 00:35
KT7A-RAID V1.3 and a AXDA2100UT3C Athlon XP I have been away from PC building for sometime. I was looking to upgrade my CPU from a 1700+ to something new. I found an AthlonXP 2100 AXDA2100UT3C. Will this work in a KT7A-Raid V1.3? Any CPU recommendations would be appreciated. Thanks, Larry ... 11 Jan 2007 07:06
Migrate to RAID1 without losing data. Possible? Hi all! I currently have a drive with WinXP/Vista in dual-boot. This drive is connected to a Abit AB9 Pro motherboard (Intel� P965 / ICH8R Chipset). Is it possible to migrate this single drive to a RAID1 setup without losing any data? (I already have installed a 2nd drive, identical to the 1st) Regards, ... 5 Jan 2007 05:52
AN8-Ultra - System Running Fail-Safe State Message? Suddenly I am getting the following message when I boot up: "System is running in Fail-Safe state. Please recheck BIOS - CMOS setup". I looked around the BIOS settings but cannot find anything wrong. I reloaded optimized settings for everything, no difference. If I press F1 to continue, everything seems to work OK... 26 Dec 2006 19:51
Abit NF7 With 160 GB Hard drive I got my NF7 2.0 a 160GB drive and it can't seem to detect it. Is it supposed to? Can this be fixed with a bios update? ... 10 Jan 2007 11:48
DESPERATE - NEED A KG7-RAID - WILL PAY $$$ Hi There, I know this is a shot in the dark, but I'm hoping someone may be able to help me out. We had a file server that was using the KG7-RAID motherboard and had two drives set up in a RAID stripe set. The motherboard died. We are in an unfortunate position where we are unable to retrieve the files from th... 7 Jan 2007 13:34 |