Abit

AL8 no longer works with PCIe
For some reason my AL8 no longer works with my PCIe graphics card. It hangs on LED code 2b and gives a BEEEEEEP BEEP BEEP tone The card works in an similar PC, and swapping PSUs does not cure it. If I plug in a PCI graphics card, it will boot without the beeps, but will only display via the older card. I ha... 12 Mar 2007 06:03

cpu temp on KN8 SLI - solved
On Fri, 09 Mar 2007 19:20:28 +0000, Mark Pryor wrote: On Fri, 09 Mar 2007 10:33:42 -0800, Mark Pryor wrote: On Fri, 09 Mar 2007 07:12:49 +0000, Wes Newell wrote: On Fri, 09 Mar 2007 00:08:13 +0000, Mark Pryor wrote: hello, MB: abit KN8 SLI CPU: AMD 3800+ Venice (sin... 9 Mar 2007 16:06

Abit KV8-MAX3 Error State
I have an Abit KV8-Max3 motherboard with an AMD Athlon64 3000+ CPU and 768MB of DDR 333 RAM. The system has intermittently experienced issues where the system board speaker would begin emitting a two-tone low-high, low-high repeating tone. Usually when this occurs, it starts during the the boot process and I ca... 9 Mar 2007 17:42

cpu temp on KN8 SLI
hello, MB: abit KN8 SLI CPU: AMD 3800+ Venice (single) RAM: OCZ platinum PC-3200 2x512 at 2-3-2-5 VIDEO: Asus GeForce EN6800 pci-x I ran this at default settings for a few days with openSuSE 10.2 x86_64 all the utilities reported ridiculously low cpu temp: 20 C the bios also says it never gets past 30 C. W... 9 Mar 2007 14:29

Tools of the trade
"Dylan C" wrote in message... What is a good power rating for a soldering iron? I'll be working with components similar to PC components (accelerometers, resistors and such) and have no idea how much power is best for the job. First and foremost, if you're working with PCBs, you need something with a ti... 8 Mar 2007 19:24

Abit IC&-Max 3 Motherboard and Raid 0 setup for WinXP professional SP2
Help, A complete dummy when it comes to this stuff! Can anyone tell me the correct settings for all the BIOS/CMOS pages so that I can install two Maxtor 160G HD's for Raid 0 on an existing Puter? I had this set up before, moved my hardware to a dif. Box and Screwed it all up!! I got it going again in a regular... 7 Mar 2007 13:07

Abit IC&-Max 3 Motherboard and Raid 0 setup for WinXP professional SP2
Help, A complete dummy when it comes to this stuff! Can anyone tell me the correct settings for all the BIOS/CMOS pages so that I can install two Maxtor 160G HD's for Raid 0 on an existing Puter? I had this set up before, moved my hardware to a dif. Box and Screwed it all up!! I got it going again in a regular... 7 Mar 2007 13:38

NF7-S and SATA: Random file corruptions - please help!!
Hello, I'm desperate for advice and hope that someone here can help me. I have had an NF7-S motherboard rig for over 3 years. I recently upgraded to another machine and decided to give the old rig to my mother. I'm running: NF7-S (v2) 2x SATA HDDs (not in raid) GeForce 6800GT 1Gb RAM All at stock I... 8 Mar 2007 07:27

GD8 Pro DVD problem
Hello all, I recently installed a GD8 Pro motherboard in my PC, but I cannot boot from DVD anymore. My Pioneer DVD writer isn't recognized in the BIOS, but it's working fine in Windows Vista. I checked all the jumper settings, cables, ..., even tried to clear the CMOS, but it had no effect. Besides the DVD ... 4 Mar 2007 17:19

> WD 74GB RAPTOR 16MB CACHE INCOMPATIBLE, Previous generation with8MB of cache work fine.
On Jan 13, 6:17 am, Velosapien <Velosapien.2kc...(a)nospamplease.com> wrote: I'm having the exact same problem with a new WD740ADFD 16MB raptor I bought a couple of days ago for my IC7-G. So far the only way I can get it to work is by running it from the Silicon Image controller. Absolutely a no go on the IC... 4 Mar 2007 10:29