Abit
in [Hardware]
|
opteron 175 on kn8 SLI pro and powernow-k8 hello, On abit k8n SLI pro I'm currently running the 939 Athlon64 4000+. I was happy to see that scaling is supported in openSuSE x86_64 for my chip. I also have an opteron 175. This chip won't scale on a gigabyte ga-k8n uptra, no matter what I try. I thinking to try it on the abit k8n since there powernow d... 17 Mar 2007 00:57
memory - 2 modules versus 4 I just purchased a pair of good 1 GB ddr2 modules for the Abit AB9 Quad and I will eventually be going up to 4 GB total memory. Would I be better off returning the memory I have and getting a pair of 2 gb modules with looser timings, or keep the faster memory I have and add 2 more when I am ready? Pros / cons o... 13 Mar 2007 21:52
SUMMARY: NF7-S v2: mixing RAM CAS types okay ? On Wed, 21 Feb 2007 02:37:42 +0000, I wrote: I have an NF7-S v2 system, with an Athlon XP 2600 (Barton) and 512 Mb Corsair ValueSelect CAS 3-3-3-8 RAM. It all works perfectly well (no overclocking) but I'd like to add another 512 Mb RAM. The closest match in the stock list of my usual supplier is a 512 M... 13 Mar 2007 21:52
AB9 Pro and AHCI If I try to install Windows XP on my AB9 Pro with AHCI enabled, it cannot find my sata hard drives - no matter which driver disk I use. If I install *then* enable AHCI, XP won't boot. If I leave AHCI disabled, my optical drive's performance sucks. Any tips on which driver disk to use, or which magic incant... 13 Mar 2007 15:23
SATA problems Red Lizard wrote: Red Lizard wrote: So as I understand it if you dont want to run RAID you should set all in IDE FUNCTION SETUP to ENABLED & all in RAID FUNCTION to DISABLED? Im not running RAID & this is how my bios is setup. I ask because my KN-8 Ultra based system has slow down problems that I ... 12 Mar 2007 19:09
Looking for a replacement for the Chipset Fan on my KR7A-133R The chipset fan on the KR7A-133R in one of my test machines went out. I'm looking for a cheap cooling replacement that is relatively quiet. Below the stock fan is a small heat sink. I saw some heat sinks for sale at places like Zalman, but I have no clue if they'll work for this board. A good heatsink will pr... 12 Mar 2007 19:41
New AB9 Quad GT bios when? Does anyone know when there will be a new non-beta bios available for the AB9 Quad GT? I gave up on the 2 betas that are circulating because they broke the multiplier and downclocked my processor. I am hoping for a bios that doesn't change the multiplier to 6X when you try to overclock and that also fixes the US... 12 Mar 2007 17:31
DVD playback blue-screens XP on KT7A-RAID I need some ideas here because I'm fresh out. KT7A-RAID mobo, latest bios, keeps blue-screening XP SP2 trying DVD playback. Tested the memory with memtest, it's fine (512MB) tried 3 different video cards, tried 2 different sound cards (note video and sound are the only 2 cards in the system). Updated DirectX to... 12 Mar 2007 18:04
AL8 no longer works with PCIe For some reason my AL8 no longer works with my PCIe graphics card. It hangs on LED code 2b and gives a BEEEEEEP BEEP BEEP tone The card works in an similar PC, and swapping PSUs does not cure it. If I plug in a PCI graphics card, it will boot without the beeps, but will only display via the older card. I ha... 12 Mar 2007 06:03 |