|
From: Sven on 4 May 2008 13:33 OK, then you did actually 'hard reset'. Like I said, the backup battery is only there to allow battery swapping. It is meant for a minute or so, though some manuals, screens mention a time frame a bit longrer than that. Typically swapping a battery only takes 15 secs or so. A bad backup battery is evidenced by your trying to swap a batterry and getting a hard restet during that short 15-30 sec period. Unfortunately these things are internal, and often soldered in. Some are just a charged capacitor. The feature of shutting down when power is low, is an attempt to reserve some percentage of the regular battery to maintain data at the lowest possible current draw possible, radios off, screen off, essentially no processing, just enough to maintain RAM. With a new battery that lasts 6 hours, the reserve when the saver feature kicks in may last 6 hours or 12, depending on the device. With an old battery, it may shorten the length of time you have to get real power applied dramatically. All I can say is, do remember to take your extras, (your Battery Extender would have saved you) maybe investigate and invest in a backup program that features a low battery trigger, or, get a WM5/6 device to replace what you have. These all have persistant memory. You can leave the battery out, lay it on the shelf for a month, replace the battery and be right where you left off. I wouldn't recommend this with applications open, mind you, but closed files will remain. Oh, and you will have to suffer through all the reminders you missed during the month. ;) "Terry Pinnell" <terrypinDELETE(a)THESEdial.pipex.com> wrote in message news:iahq145afkpbfssq0c0aqfnt9vl7quhor0(a)4ax.com... > "Sven" <sejohannsen(a)hotmail.com> wrote: > >>Did you have anything left? Earlier PPCs had some level at which they went >> > > No, nothing left at all. >
From: Terry Pinnell on 5 May 2008 07:57 "Sven" <sejohannsen(a)hotmail.com> wrote: >OK, then you did actually 'hard reset'. No. As I said, "...as soon as I placed the 2210 in its cradle, the normal Today screen was displayed." Everything was normal. But the same happened again yesterday, only this time it *did* get a hard reset. This is what happened. Lesson-learned, this time I was carrying two spare lithium batteries, both recently charged. But after inserting the first, the PPC still failed to start. I'll have to check the battery; it was the oldest one I have, so maybe it's not holding a charge. On inserting the second, the PPC started OK - but this time did a hard reset! I take automatic backups every morning at 07:00 so I restored the latest of those, which at least got me back into Mem-Map and let me record the remaining 10% of my walk. But of course - I no longer had my pre-loaded track on the PPC (because I'd made that shortly before the walk, well after 07:00) - I lost all the earlier recorded track - I lost all 3 or 4 overlay backups I'd taken at stages throughout that 90%, as extra insurance. >Like I said, the backup battery is >only there to allow battery swapping. It is meant for a minute or so, though >some manuals, screens mention a time frame a bit longrer than that. >Typically swapping a battery only takes 15 secs or so. A bad backup battery >is evidenced by your trying to swap a batterry and getting a hard restet >during that short 15-30 sec period. Unfortunately these things are internal, >and often soldered in. Some are just a charged capacitor. > >The feature of shutting down when power is low, is an attempt to reserve >some percentage of the regular battery to maintain data at the lowest >possible current draw possible, radios off, screen off, essentially no >processing, just enough to maintain RAM. With a new battery that lasts 6 >hours, the reserve when the saver feature kicks in may last 6 hours or 12, >depending on the device. With an old battery, it may shorten the length of >time you have to get real power applied dramatically. > >All I can say is, do remember to take your extras, (your Battery Extender >would have saved you) maybe investigate and invest in a backup program that >features a low battery trigger, or, get a WM5/6 device to replace what you >have. These all have persistant memory. You can leave the battery out, lay >it on the shelf for a month, replace the battery and be right where you left >off. I wouldn't recommend this with applications open, mind you, but closed >files will remain. Oh, and you will have to suffer through all the reminders >you missed during the month. ;) I'll include the Battery Extender too next time ;-) -- Terry, East Grinstead, UK > >"Terry Pinnell" <terrypinDELETE(a)THESEdial.pipex.com> wrote in message >news:iahq145afkpbfssq0c0aqfnt9vl7quhor0(a)4ax.com... >> "Sven" <sejohannsen(a)hotmail.com> wrote: >> >>>Did you have anything left? Earlier PPCs had some level at which they went >>> >> >> No, nothing left at all. >>
First
|
Prev
|
Pages: 1 2 Prev: MS Activesync 4.5 "Looking for changes" for long time Next: Text messages won't delete. |