Prev: Allow splitting of windows beyond 2 panes
Next: Master Plan Project and problem with Check Out/In
From: Devonshire on 13 May 2008 01:21
In the print preview the bars don't show up and they are also missing from
the prints on my HP Z3100 large format plotter.

I can see the text, links and the columns only.

I did format the text to display field data on the left, right top & bottom
of all the bars. Is the print function truncating the bars because they are
too high???
From: Mike Glen on 13 May 2008 05:19
Hi Devonshire ,

Welcome to the Microsoft Project newsgroup :-)

Please see FAQ Item: 44. Printing Problems

FAQs, companion products and other useful Project information can be seen at
this web address: http://project.mvps.org/faqs.htm

Hope this helps - please let us know how you get on:-)

Mike Glen
Project MVP

Devonshire wrote:
> In the print preview the bars don't show up and they are also missing
> from the prints on my HP Z3100 large format plotter.
>
> I can see the text, links and the columns only.
>
> I did format the text to display field data on the left, right top &
> bottom of all the bars. Is the print function truncating the bars
> because they are too high???


From: Devonshire on 13 May 2008 12:11
OK, I give up. Where are the FAQ's located on this site? I don't see them
anywhere.

I figured out that I could increase the row height manually to make it print
correctly. As I recall from previous versions that this was automatic and
set to the optimal height by the program. How is that done in 2007? (I.e.
made automatic so I don't have to futz around by trail and error with big
plots).

Then I was having some weird out of memory messages and couldn't create a
complete PDF without missing text in the columns on the left and quite a bit
of erratic linework and hatch patterns that isn't there on screen. Prints to
my 11x177 HP laserjet are fine.

"Mike Glen" wrote:

> Hi Devonshire ,
>
> Welcome to the Microsoft Project newsgroup :-)
>
> Please see FAQ Item: 44. Printing Problems
>
> FAQs, companion products and other useful Project information can be seen at
> this web address: http://project.mvps.org/faqs.htm
>
> Hope this helps - please let us know how you get on:-)
>
> Mike Glen
> Project MVP
>
> Devonshire wrote:
> > In the print preview the bars don't show up and they are also missing
> > from the prints on my HP Z3100 large format plotter.
> >
> > I can see the text, links and the columns only.
> >
> > I did format the text to display field data on the left, right top &
> > bottom of all the bars. Is the print function truncating the bars
> > because they are too high???
>
>
>
From: Mike Glen on 13 May 2008 12:50
Hi Devonshire,

FAQs, companion products and other useful Project information can be seen at
this web address: http://project.mvps.org/faqs.htm
You need to open the site first and read the FAQs

Hope this helps - please let us know how you get on:-)

Mike Glen
Project MVP

Devonshire wrote:
> OK, I give up. Where are the FAQ's located on this site? I don't
> see them anywhere.
>
> I figured out that I could increase the row height manually to make
> it print correctly. As I recall from previous versions that this was
> automatic and set to the optimal height by the program. How is that
> done in 2007? (I.e. made automatic so I don't have to futz around by
> trail and error with big plots).
>
> Then I was having some weird out of memory messages and couldn't
> create a complete PDF without missing text in the columns on the left
> and quite a bit of erratic linework and hatch patterns that isn't
> there on screen. Prints to my 11x177 HP laserjet are fine.
>
> "Mike Glen" wrote:
>
>> Hi Devonshire ,
>>
>> Welcome to the Microsoft Project newsgroup :-)
>>
>> Please see FAQ Item: 44. Printing Problems
>>
>> FAQs, companion products and other useful Project information can be
>> seen at this web address: http://project.mvps.org/faqs.htm
>>
>> Hope this helps - please let us know how you get on:-)
>>
>> Mike Glen
>> Project MVP
>>
>> Devonshire wrote:
>>> In the print preview the bars don't show up and they are also
>>> missing from the prints on my HP Z3100 large format plotter.
>>>
>>> I can see the text, links and the columns only.
>>>
>>> I did format the text to display field data on the left, right top &
>>> bottom of all the bars. Is the print function truncating the bars
>>> because they are too high???


 | 
Pages: 1
Prev: Allow splitting of windows beyond 2 panes
Next: Master Plan Project and problem with Check Out/In