Cisco

reverse route injection maintenance
Hi all, posted a while back on issues of 'reverse routes' not being removed from an IOS (12.4) routing table, and no reply back so please help ! This is question re maintenance of the static routes that are dynamically inserted when we have the "REVERSE ROUTE" configuration in the dynamic crypto map. IOS ... 24 Apr 2008 10:14

mDNS
I have a 877W with advanced IP services. C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T4, RELEASE SOFTWARE (fc2) I'm trying to make sure mDNS works on my wireless LAN but when I ping from one Apple Mac, I get replies only from that Mac, whereas when I ping from the router, I get replies from both Ma... 23 Apr 2008 12:31

GLBP EIGRP Scenario
I posted a couple of weeks ago about EIGRP over MPLS. The scenario that I was having problems with was balancing the traffic across two T1s attached to two Cisco 3845s. We have HSRP for redundancy, but on a suggestion from this group, I am pursuing configuring GLBP instead of HSRP. However, now, I am wondering if I... 23 Apr 2008 12:31

Strange errors on an ATM switch
We've got an 8510 switch, which works OK for the most part, but some errors have been showing up in the log. They look like: ..Apr 20 12:00:56.536: %ATM-3-ILMIOPTIPOLLFAIL: Internal error (3) in ILMI OPTIPOLL module ..Apr 20 12:34:12.411: %ATM-4-ILMIKEEPALIVEFAIL: ILMI(ATM3/1/ima0): Restarting ATM signalling and... 24 Apr 2008 03:40

VLANs on an 8510
I'm working on a project involving vlans and I'm kind of stuck on something. I've got several 8510 switches that I'm trying to set up vlans and VTP on. None of them seem to give me any way to do that. I'm sure I might be missing something simple. Do the 8510s support creating vlans? Thanks! --Steve ... 24 Apr 2008 04:28

Need to pass vlan info over ATM
I've got a central site with several remote sites connected over ATM. A typical setup looks like this (starting from the remote side): core 3500 switch -> 3640 router -> 8510 ATM switch -> ATM cloud -> 8510 ATM switch -> central core 4507 All the remote sides are connected to one of two 8510 switches. I'd li... 24 Apr 2008 03:40

asa 5510 snmp active users
Hi Can I get OID from ASA that tells me how many users use vpn (ipsec client, ssl) in this moment ? I tried search by snmpwalk but i haven't seen this OID I looking some MIBs for ASA5510 too thx for clue ted ... 24 Apr 2008 11:50

DHCP - One host multiple IPs
Dear Folks, is it possible to assigne a host (one mac address) more then one static IP. The reason is, that a NAS is not abel to configure with a static IP. This NAS has 2 NICs but only one MAC Address and I'd like to assign this NAS 2 static IPs. My DHCP "Server" is a Cisco Catalyst 6506 E. Thanks Rober... 24 Apr 2008 14:15

caller ID with callmanager/communication manager express
I have a CallManager Express 4.3 install with a 2 full PRI's connected and it services 2 different companies (although they are internally related) My provider lets me manipulate the outbound caller ID number. I'm trying to determine a few things related to caller ID 1) Can I manipulate the outbound caller ID ... 24 Apr 2008 06:50

Output Varies from Show Access-List Command
2600 with C2600-IK9O3S-M, Version 12.3(26) Access-list 102 is applied to the outside interface incoming. When I type, "show access-list 102" I get varying output. I always get the numbered ACEs from the config. For example: 10 permit tcp any host 192.168.0.20 eq smtp (1912 matches) 20 permit tcp any ... 24 Apr 2008 04:28