Cisco

ipsec when one site has dynamic ip address
When one site has dynamic ip address, besides ezvpn, is there any other vpn method to make the ipsec tunnel betwen the two sites ? Thanks, Dt ... 25 Apr 2008 02:58

PIX 6.3(5) NAT Headache
Due to some inflexibility on the part of a 3rd party I am faced with adding NAT complexity to what was going to be a simple solution (public to public VPN). My network has a PIX pair running 6.3(5). There are several interfaces and lots of NAT, Policy NAT etc. To keep thing simple the point of interest are..... 24 Apr 2008 17:27

2600 Memory Questions
I'm getting ready to load a new IOS in my 2611XM that requires 128MB. Show Version indicates that 96MB is installed now. Since 128MB is the minimum recommended RAM, is there any reason to put more in (not running BGP)? For example, one new 128MB DIMM plus leave in 96MB or 64MB, depending on whether one chip or t... 24 Apr 2008 16:39

PIX 501: NAT VPN Clients to Inside?
Ok. What I want to do seems quite simple, but whatever I just can't quite get the pieces to mesh. I have a pix 501 that I'm trying to configure to provide VPN access to our local network for clients running the Cisco VPN client 4.x. Our network is seperated into VLANS, but uses public IP's for most machines. ... 24 Apr 2008 17:27

DHCP on DMZ interface
I'm trying to set up a DHCP pool on a new DMZ interface (DMZ2) for visiting laptop users to connect to the internet wirelessly. I had imagined this to be a fairly simple process, however the hosts cannot access the internet. Here are the commands I entered: ------------------------------------------------------... 24 Apr 2008 16:39

Cicso Pix 501 VPN
Hello. I have pretty much no experience with cisco, but i have to create a VPN connection on pix 501, so people can access our network from home. As i understand i need to use something called roadwarrior. Can anyone recomend some reading material on this subject? tutorials/ guides? Or some good way of approach... 24 Apr 2008 06:02

Select equipment help need.
We have a stack of three WS-C3750-48TS-S with GLC-LH-SM= in it. We must connect WS-C2960G-48TC-L to this port(s). The question is to get a code for all equipment items to make this connection. Any help is appreciated. Serhiy. P.S. Sorry for my English ;-) ... 24 Apr 2008 07:38

Multicasting + Cisco 10k + Juniper E320
We are planning to build an MPLS-core with Cisco-equipment (7600 or CRS-1) with a PE-layer connected to it. The PE-layer will contain Cisco 10k routers with PRE2 and Juniper E320's. We want to do multicast MPLS VPN in the PE-layer. Has anyone experience with it? How is the coöperation between Cisco and Juniper on... 24 Apr 2008 02:52

AS 5400 Secure implementation or Security Policy
Dear All, Anybody tell me how can we hardening or secure implementation or checklist AS5400 on enterprise netwok Regards: aaziz ... 24 Apr 2008 00:29

PIX & Global Address Pools
Hi I have a PIX in my network. It is used to pass HTTP & HTTPS traffic thru to a Proxy server in the DMZ (running Squid) for Internet access. My understanding is that the Global Address Pool is used to perform NAT on the inside interfaces I am finding that the pool of addresses is insufficient for the amount of u... 24 Apr 2008 16:39