Cisco

ipv6
ipv6 -------------------------------------------------- All your IPV6 are belong to me -------------------------------------------------- -- --------------------------------- --- -- - Posted with NewsLeecher v3.8 Final Web @ http://www.newsleecher.com/?usenet ------------------- ----- ---- -- - ... 6 May 2008 22:21

ASA 5505 problem with smtp
I can´t get any email through my asa, can anybody help me. My config: ASA Version 7.2(1) ! hostname ciscoasa domain-name default.domain.invalid enable password jQUCdrURwbTfANCO encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.27.1 255.255.255.0 ! interface Vlan2 ... 6 May 2008 23:25

IP CLASSLESS not working
Hi everyone. I have a problem concerning 'IP CLASSLESS' on cisco routers I have quite a lot of vpn tunnels with IP CLASSLESS enabled on the router and some that it is not enabled. i have noticed that there are some application that i'm using that are not working fine when it's not enabled. i've tried to enable ... 7 May 2008 10:57

ATM QoS on 877
On Apr 30, 6:53 pm, Merv <merv.hr...(a)rogers.com> wrote: On Apr 30, 1:16 pm, HangaS <mafo...(a)gmail.com> wrote: I did a few searches before I post, but I guess I ruled out the firmware version issue cos the router is brand new with a recent manufacture date. I don't have it in front of me 'ti... 6 May 2008 22:21

Logging issue in CiscoSecure ACS 4.2
Hi All, Good day everyone, I have a problem with ACS's logging and I hope anyone who had similar experience could help me on this issues. We have two ACS on our network (primary & secondary). All our dial-up customer are authenticated on primary ACS and the secondary ACS is only serves as a backup ONLY when... 6 May 2008 22:21

Router Stack??
On May 2, 8:15 pm, hhs <hamsovann...(a)gmail.com> wrote: On May 2, 5:10 pm, Sam Wilson <Sam.Wil...(a)ed.ac.uk> wrote: In article <dbf8d992-e9ef-460d-9d53-aad654332...(a)h1g2000prh.googlegroups.com>, hhs <hamsovann...(a)gmail.com> wrote: On May 2, 4:19 pm, Sam Wilson <Sam.Wil...(a)ed.ac.uk> w... 6 May 2008 23:24

ifIndex 0 - problem
Hello, I have inherited a management system that is barfing on some cisco 72xx and 76xx routers when it finds an ifIndex = 0, rather than ifIndex =1 or 10. I gather that ifIndex =0 is not allowed, but I am not sure by who or what - so I dont know if it is reasonable for the NMS to ignore ifIndex = 0 or not. N... 7 May 2008 09:20

ezvpn with ipsec over tcp
The easy vpn documentation shows the command "crypto ctcp port" to enable ipsec over tcp. I added this command on both sides server & client but show crypto ctcp session shows nothing. And the log shows the ipsec sessions are still working on 4500. Besides adding the command crypto tctp on both sides and open the... 6 May 2008 22:21

Cisco 851 firewall woes
On 6 May, 09:42, "Peter" <SOME...(a)orcon.net.nz> wrote: Greetings, When I connect to the router via the console, this is what it tells me: ----------------------------------------------- vorpalrouter#conf t Enter configuration commands, one per line.  End with CNTL/Z. vorpalrouter(... 6 May 2008 23:25

IPsec configuration
Joe Beasley wrote: The Virtual Tunnel Interface and the crypto map are not interchangeable. I see - and wh not? What's the technical difference? Regards fw ... 6 May 2008 22:21