Cisco
in [Network]
|
What do you think of my acces list? Steven V.A. wrote: Thanks for the explanation. Actually I did it mostly the way you described. I tought there was another way to move up an acces list entry. (w/o removing them) Like this: conf t ip access-list extended 102 80 move 80 -> 21 That would then move up acces list en... 19 Jun 2008 01:14
IOS update on Cisco 5510 I need help to update my flash from ASA Version 712-k8.bin to 8.0. -Do I need to update step by step, first 7.21, 7.22? -What are the setp to update? I have never done this before, if some one can give me a setp by step instructions thru the telnet session, I would really appriciate. Thanks, Raj ... 7 May 2008 15:04
Mario Kart Mario Kart http://pandaeatsbamboo.blogspot.com/2008/05/mario-kart.html ... 7 May 2008 15:04
Mailserver Dead, Route IP on PIX to another Internal? I have 2 Mailservers, Can I map 2 External IPs to the same Internal IP? static (inside-HBG,outside-HBG) 192.168.1.8 10.1.0.9 netmask 255.255.255.255 static (inside-HBG,outside-HBG) 192.168.1.9 10.1.0.9 netmask 255.255.255.255 ... 7 May 2008 14:14
Policy Based Routing and/or NAT Hi, I'm trying to replace this Linux GW with a Cisco 877 however I'm having a bit of an hard time implementing Policy Based Routing together in NAT depending on the policy. I'll explain: This was the previsous setup: | | | Linux GW | ---> Network 1 ADSLoISDN | cisco 83... 7 May 2008 12:35
Old PIX 6.35 and Vista -64 bit ? Hi! Do You know if there is a client for 64-bit Vista that could make a IPSEC VPN to a old PIX runnix sw 6.35 Best regards Marko Uusitalo ... 7 May 2008 13:24
https funkar inte på Conentratorns utsida Jag försöker sätta upp WebVPN på vår 3005 och 3020 koncentrator men lyckas inte få till så att man kan accessa https webben på koncentartorns utsides interface. Jag kör version 4.7.2.N-k9 Har enablat https på outside och enablat webvpn men jag får aldrig upp loginsiten. Är det någon som har något tips angående dett... 7 May 2008 03:31
PAT/NAT ACL configuration question Hi everyone, I setup a PAT overload on a 2611 router to allow some workstations internet access. I also want to setup a static NAT for a web/ftp server. Is it possible to do both simultaneously without opening up everything? pete ... 6 May 2008 23:25
Multiple pvc's on Cisco 878 Hello, I'm having a problem with the configuration of a Cisco 878. What i'm trying to do is configure 2 PVC's. One is a PPPoA connection, and the other a RFC 1483 connection, in full bridge. The thing that i can't get to work is using the 2 connections similtaniously. I'm using the following config: ! ... 7 May 2008 09:20
PIX 501 LAN Ports Is it possible to define what subnet each of the four lan ports/interface has? If yes, how? Is it possible to do it for vpn client subnet? For instance, if vpn ip pool subnet is 192.168.4.0, I want to make physical connection to machine whose ip address is on 192.168.4.0. Thanks in advance ... 6 May 2008 23:25 |