Cisco
in [Network]
|
have PIX with VPN, need to obtain isakmp key Hello . We have a PIX 506e (6.3.5) and site to site VPN and if possible we need to get the existing isakmp key from the PIX. The key which was used to secure the VPN. We have physical access to the PIX but when we run "show run" it only shows ******* as the isakmp VPN key. How can we get this info? We purchased a ... 9 Jul 2008 21:57
Accessing ASA Standby via site to site vpn Hi All, We are running ASA 5550 version 7.2(3)12 and are encountering the following problem: We are running a site to site vpn and managing the devices remotely. I have no trouble accessing the active device via ssh. The devices are working active/active mode. I am having no success accessing the standby devi... 19 Jun 2008 01:14
Internet traffic through VPN to Hello everyone, I am trying to figure out a problem we are having at the company I work at. Let me give you a bit of an overview. HQ in Mason, Ohio with a VPN3005, Outside IP of 172.20.180.90/30 (Changed the first octet for security). Inside IP of 172.20.180.96/27 Branch in Pasadena, California with a PIX 506E... 19 Jun 2008 01:14
Could someone please verify a portion of this configuration? Thank you. On Tue, 17 Jun 2008 08:02:51 -0400, KCotreau wrote: interface FastEthernet0/1 ip address 61.126.196.1 255.255.255.0 secondary ip address 63.222.171.1 255.255.255.0 secondary ip address 61.126.195.1 255.255.255.0 I believe your server also has additional IP address from 61.126.195.0/24 network, otherwi... 19 Jun 2008 01:14
Cisco PIX VPN access-lists I am having difficulty configuring the VPN access-lists on LAN to LAN IPSec tunnel between a Cisco PIX and a Juniper SSG 20. I'm running PIX version 7.1(2) and I have sysopt connection permit-vpn enabled, which, from what I understand would then force access-list restrictions to be determined by the VPN group-poli... 19 Jun 2008 01:15
cisco 2611-dc power cable HI, all I recently won a cisco 2611-dc router off ebay, without reading that it was, in fact, a DC router until too late. I am now attempting to find the appropriate cable to use to power the router Can anyone tell me where I can get the power cable for a Cisco 2611-dc router, and what the part number is? ... 19 Jun 2008 01:14
ARP entry disappears Hi I have a very strange behaviour on a Cisco 871 (it occurs on a 831 as well): Sometimes the ARP entry for X.X.X.108 disappears in the ARP table and then this address and the nattet one cannot be reached from outside. Usually the ARP table looks like: #sh arp Protocol Address Age (min) Hardware A... 23 Jun 2008 14:47
vpn client to access some specific external host thru the vpn connection I can access the company ' servers thru the client vpn connection. For a particular server ( smtp server ) outside of the company, I would like my access will go thru the company router ant NATed before accessing that server so I add this server IP into the ACL list of the "crypto isakmp client configuration group... 19 Jun 2008 01:14
CiscoWorks Inventory Interface Hi I am looking for some automated interface that provides inventory information about cisco network (if my present knowledge is right, then CiscoWorks tools related to network management provide only web interfaces (or simple GUIs)). Does anyone can give me some hint ? I found, that I can probably collect all i... 30 Jul 2008 17:54
Configure MPLS VPN on Ethernet VLAN interfaces I created Ethernet subinterfaces with VLAN and isl/dot1q encapsulation. then i tried Applying VRF (part of MPLS VPN) to it, and it worked without giving error. But I believe, VPN isnt supported on VLAN interfaces.. it doesnt make sense to have L3 tunneling inside L2. I dont know if this configuration works in re... 19 Jun 2008 01:14 |