Cisco
in [Network]
|
Cisco 877 Router -- Multiple IP Addresses I'm a bit of a novice with Cisco routers, so please forgive me if I do not explain this clearly. Our company has a T1 line that connects through our Cisco 877 router. We have been given a block of public IP addresses (3 I think), but are currently only using one of these addresses. We would like to use one ... 24 Jun 2008 20:34
ASA 5510 QoS Is there a way for an ASA 5510 to set DSCP on packets? If not, how do I force each of the four physical interfaces to goto their "router" Here's our layout: ASA 5510 Port 0 - INSIDE(192.168.1.0/24) Port 1 - OUTSIDE(75.X.X.X/25) Port 2 - DMZ(10.10.0.0/24) Right now all hosts in DMZ use the ASA(10.10.0.1)... 24 Jun 2008 12:18
SPAN + cisco 6500 Hello, I am trying to configure SPAN on a cisco 6509 cat switch, we are trying to configure ports based span, with three ports as source (which are configured with pvlans) and a destination port on a normal vlan. When I issue a command: set span 3/14,6/7 7/20 both inpkts disable learning enable multicast en... 25 Jun 2008 06:46
SPAN and Ingress traffic on 3750 Should the ingress option allow me to connect to the host on the destination port with SPAN enabled. It isn't Session 1 --------- Type : Local Session Source VLANs : Both : 7 Destination Ports : Gi1/0/3 Encapsulation : Native Ingress ... 26 Jun 2008 10:29
Network Upgrade: Replacement for 837 Hi, I have an 837 ADSL router running for a few years now, and my provider is telling me they are wanting to upgrade us to using ADSL2 which is not supported on that model. Does anyone know the model of router which supports ADSL2? This doesn't need to be rackmounted, just a similar size to the 837. It will... 27 Jun 2008 14:12
Network upgrade: ASA 5505 configuration Hi, I need to do some IP address rearanging on my Cisco ASA 5505 as I am currently not using NAT and I want to get it to a configuration where my external IP addresses are on the outside interface, and I can use static NAT to map specific internal IP addresses to public IP addresses. I have a couple of questi... 26 Jun 2008 19:46
ASA 5520 HTTP Slow I recently removed a Checkpoint firewall at my host site and replaced it with an ASA 5250. All is going well, except for web traffic, which seems to be affected greatly by this change. All the websites behind the firewall are much slower since the change. I understand that the ASA inspects web traffic much more tho... 23 Jun 2008 15:49
LAN-to-LAN and nat within Hi I going to create a lan-to-lan (ipsec) to a third party, but they will not accept our ip adresses, so i need to hide in my public ip adress does anybody have a ide , how to solve the case i was thinking about a tunnel interface with ip nat outside in wan interface and nat inside on my ethernet but i'm not ... 23 Jun 2008 15:49
Router debug Users cannot connect to the applications but can PING the app servers (10.10.10.130/134/135) - these are NATted - users see them as 192.168.0.42/37/35. Any suggestions on what the router debug output is saying? 3725_Backup# *Mar 1 00:11:12: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to xxxxxxx 3725_... 24 Jun 2008 15:25
Broadband Cisco core Network Dear All, I have a project to implement a wired broadband data service within a building of 120 storeys and am a newbie in the broadband field. The equipments provided are 3 a Cisco 7600 Cisco 3750 switch 2MB E1 connection to an uplink provider. Please help on the architecture of the core network Other equipments... 24 Jun 2008 03:05 |