|
Prev: computer does not boot
Next: Looking for new keyboard.
From: ealadi on 18 Apr 2008 12:46 When I try to start my computer, all that happens is that message “Intel inside Pentium D” appears on the screen. I have changed the battery on the motherboard; this makes no difference. What can be the fault? Thank you Ealadi
From: Grinder on 18 Apr 2008 17:52 ealadi wrote: > > When I try to start my computer, all that happens is that message > �Intel inside Pentium D� appears on the screen. I have changed the > battery on the motherboard; this makes no difference. What can be the > fault? That sounds like a splash screen. Sometimes you can get more specific information by hitting TAB or ESC on startup. Or, if you can get into BIOS you can usually turn it off. Also, I would suggest putting your system into a minimal configuration. Pull any cards, except for video if you need it, from the expansion slots. Disconnect hard, floppy and optical drives. If you computer POSTS at that point, add in your drives and cards to determine what peripheral makes the difference. If your system still hangs before the POST, reseat your memory. If you have redundant memory (check your motherboard manual) use a minimal amount. Swap memory to see if one particular module makes a difference. If possible, get some entirely different known good memory to try.
From: ealadi on 19 Apr 2008 11:47 On 18 Apr., 23:52, Grinder <grin...(a)no.spam.maam.com> wrote: > ealadi wrote: > > > When I try to start my computer, all that happens is that message > > “Intel inside Pentium D” appears on the screen. I have changed the > > battery on the motherboard; this makes no difference. What can be the > > fault? > > That sounds like a splash screen.  Sometimes you can get more specific > information by hitting TAB or ESC on startup.  Or, if you can get into > BIOS you can usually turn it off. > > Also, I would suggest putting your system into a minimal configuration. >  Pull any cards, except for video if you need it, from the expansion > slots.  Disconnect hard, floppy and optical drives.  If you computer > POSTS at that point, add in your drives and cards to determine what > peripheral makes the difference. > > If your system still hangs before the POST, reseat your memory.  If you > have redundant memory (check your motherboard manual) use a minimal > amount.  Swap memory to see if one particular module makes a difference. >  If possible, get some entirely different known good memory to try. Thanks a lot to Grinder for a helpful answer. Ealadi
From: Grinder on 19 Apr 2008 14:57 ealadi wrote: > On 18 Apr., 23:52, Grinder <grin...(a)no.spam.maam.com> wrote: >> ealadi wrote: >> >>> When I try to start my computer, all that happens is that message >>> �Intel inside Pentium D� appears on the screen. I have changed the >>> battery on the motherboard; this makes no difference. What can be the >>> fault? >> That sounds like a splash screen. Sometimes you can get more specific >> information by hitting TAB or ESC on startup. Or, if you can get into >> BIOS you can usually turn it off. >> >> Also, I would suggest putting your system into a minimal configuration. >> Pull any cards, except for video if you need it, from the expansion >> slots. Disconnect hard, floppy and optical drives. If you computer >> POSTS at that point, add in your drives and cards to determine what >> peripheral makes the difference. >> >> If your system still hangs before the POST, reseat your memory. If you >> have redundant memory (check your motherboard manual) use a minimal >> amount. Swap memory to see if one particular module makes a difference. >> If possible, get some entirely different known good memory to try. > > Thanks a lot to Grinder for a helpful answer. Did you resolve your problem? If so, what was the solution?
|
Pages: 1 Prev: computer does not boot Next: Looking for new keyboard. |