Prev: io-controller: Document for active bytes, time and rate.
Next: [PATCH v2] Add Documentation/kvm/msr.txt
From: Ryan Mallon on 27 May 2010 18:00
Wolfram Sang wrote:
>> Looks like this has already been done:
>> http://www.mail-archive.com/linux-i2c(a)vger.kernel.org/msg03056.html
>
> Always ask which kernel is used, sigh...

Sorry? I didn't see a kernel version mentioned. I went looking because I
had though that i2c-gpio was already subsys_initcall.

>> There was a discussion a while back to make all of the embedded i2c
>> busses be subsys_initcall since i2c is often a system bus on embedded
>
> Oh, where was that? Can't recall (but couldn't recall that I acked the i2c-gpio
> patch above as well ;))
>

Moving the embedded i2c busses to subsys_initcall was discussed here:
http://lists.lm-sensors.org/pipermail/i2c/2008-June/004142.html. The
i2c_gpio bus got mentioned, which is why I thought it had already been
changed.

~Ryan

--
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon 5 Amuri Park, 404 Barbadoes St
ryan(a)bluewatersys.com PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com New Zealand
Phone: +64 3 3779127 Freecall: Australia 1800 148 751
Fax: +64 3 3779135 USA 1800 261 2934
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
From: Wolfram Sang on 27 May 2010 18:20
> > Always ask which kernel is used, sigh...
>
> Sorry? I didn't see a kernel version mentioned. I went looking because I
> had though that i2c-gpio was already subsys_initcall.

Sorry, I missed emphasizing that my comment was meant as a "note-to-myself".
You were perfectly right, of course, I should have done the same.

> >> There was a discussion a while back to make all of the embedded i2c
> >> busses be subsys_initcall since i2c is often a system bus on embedded
> >
> > Oh, where was that? Can't recall (but couldn't recall that I acked the i2c-gpio
> > patch above as well ;))
> >
>
> Moving the embedded i2c busses to subsys_initcall was discussed here:
> http://lists.lm-sensors.org/pipermail/i2c/2008-June/004142.html. The
> i2c_gpio bus got mentioned, which is why I thought it had already been
> changed.

Thanks for the pointer!

--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
First  |  Prev  | 
Pages: 1 2 3
Prev: io-controller: Document for active bytes, time and rate.
Next: [PATCH v2] Add Documentation/kvm/msr.txt