Epson R200 says out of ink, but I'm not!
in [Printers]
|
Prev: Ths group is hijacked by SPAM
Next: Wholesale Ebel Beluga Mother-of-Pearl Diamond Mini Ladies Watch 1215319 Replica
From: Calab on 21 Apr 2008 16:17 I have an Epson R200 inkjet printer with a continuous ink system. I also have an external waste tank. It's been working well for months. Today I decided to do some "preventative" maintenance. I pull the ink cartridges out of the printer and injected a bit of cleaning fluid into each line. I also swabbed out the various sponges inside the printer. I've reinstalled the cartridges but now the printer is indicating that all six cartridges are empty. I've tried removing and reinstalling them with no luck. Is there a way to tell if the printer is complaining about bad contact with the cartridges or if it really thinks it's out of ink? Is there any way to reset the ink counters in the printer? Should I just keep trying to reinstall the cartridges until I have good contact? -- Fight Usenet Spam!!! - http://improve-usenet.org:80/ Want a good newsgroup reader that will filter out GoogleGroups spam? Try MesNews - http://www.mesnews.net/gb/
From: DanG on 21 Apr 2008 16:29 "Calab" <myspam(a)csd.ca> wrote in message news:ED6Pj.80427$rd2.68798(a)pd7urf3no... >I have an Epson R200 inkjet printer with a continuous ink system. I also >have an external waste tank. It's been working well for months. > > Today I decided to do some "preventative" maintenance. I pull the ink > cartridges out of the printer and injected a bit of cleaning fluid into > each line. I also swabbed out the various sponges inside the printer. > > I've reinstalled the cartridges but now the printer is indicating that all > six cartridges are empty. I've tried removing and reinstalling them with > no luck. > > Is there a way to tell if the printer is complaining about bad contact > with the cartridges or if it really thinks it's out of ink? > > Is there any way to reset the ink counters in the printer? > > Should I just keep trying to reinstall the cartridges until I have good > contact? > > -- > Fight Usenet Spam!!! - http://improve-usenet.org:80/ > > Want a good newsgroup reader that will filter out GoogleGroups spam? Try > MesNews - http://www.mesnews.net/gb/ > > This would depend on the particular tanks that are in use, so consult the maker of the CIS system. Many of them use tanks that auto-re-set at 3%. The printer writes the status to the tank chips, and reads it back from there, so it's the tanks chips that need to be addressed.
From: Calab on 21 Apr 2008 16:32 > I have an Epson R200 inkjet printer with a continuous ink system. I also have > an external waste tank. It's been working well for months. .... > I've reinstalled the cartridges but now the printer is indicating that all > six cartridges are empty. I've tried removing and reinstalling them with no > luck. And, as usual, as soon as you ask the question, the answer bites you in the backside! I removed and reinstalled the cartridges one more time and all is working normally now! -- Fight Usenet Spam!!! - http://improve-usenet.org:80/ Want a good newsgroup reader that will filter out GoogleGroups spam? Try MesNews - http://www.mesnews.net/gb/
From: Jan Alter on 21 Apr 2008 20:38 "Calab" <myspam(a)csd.ca> wrote in message news:5R6Pj.80438$rd2.30875(a)pd7urf3no... >> I have an Epson R200 inkjet printer with a continuous ink system. I also >> have an external waste tank. It's been working well for months. > > ... > >> I've reinstalled the cartridges but now the printer is indicating that >> all six cartridges are empty. I've tried removing and reinstalling them >> with no luck. > > And, as usual, as soon as you ask the question, the answer bites you in > the backside! > > I removed and reinstalled the cartridges one more time and all is working > normally now! > > -- > Fight Usenet Spam!!! - http://improve-usenet.org:80/ > > Want a good newsgroup reader that will filter out GoogleGroups spam? Try > MesNews - http://www.mesnews.net/gb/ > > You're not alone when it comes to this bug. The contacts on the printer connecting to the chip are sometimes very iffy, and I've repeatedly gone through this dance with our C84's and C88's at school to eventually make a solid contact when replacing a cartridge. Glad you got it going again. I've also read that the electronics can be problematic to installing ARCs (auto rest chips) in that they need to be installed as a set. -- Jan Alter bearpuf(a)verizon.net or jalter(a)phila.k12.pa.us
From: measekite on 22 Apr 2008 00:35
Calab wrote: > I have an Epson R200 inkjet printer with a continuous ink system. I > also have an external waste tank. It's been working well for months. > > Today I decided to do some "preventative" maintenance. I pull the ink > cartridges out of the printer and injected a bit of cleaning fluid > into each line. I also swabbed out the various sponges inside the > printer. > > I've reinstalled the cartridges but now the printer is indicating that > all six cartridges are empty. I've tried removing and reinstalling > them with no luck. Since you stopped using Epson brand ink your printer is out of ink. > > Is there a way to tell if the printer is complaining about bad contact > with the cartridges or if it really thinks it's out of ink? Buy a new set of Epson carts and your printer will no longer report out of ink. > > Is there any way to reset the ink counters in the printer? > > Should I just keep trying to reinstall the cartridges until I have > good contact? No |