Prev: IDE DVD Burner in SATA PC
Next: Memory Upgrade
From: John on 8 Jan 2007 11:59
I installed 'Intel Matrix Storage Console' version 6.2.

It's stating 'Error Occurred' on 'Device Port 0'

'A drive in a RAID 0 volume is failing. Try to back up data immediately.'

The '(0)' (I believe) refers to the device number and is not an error
code. This is what threw me off.

I backed everything up and I'll clone the dying drive to an identical
replacement.

I ran the Western Digital diagnostics again and it says that everything
is peachy.
From: Arno Wagner on 8 Jan 2007 12:22
In comp.sys.ibm.pc.hardware.storage John <John(a)nospam.net> wrote:
> I installed 'Intel Matrix Storage Console' version 6.2.

> It's stating 'Error Occurred' on 'Device Port 0'

> 'A drive in a RAID 0 volume is failing. Try to back up data immediately.'

> The '(0)' (I believe) refers to the device number and is not an error
> code. This is what threw me off.

> I backed everything up and I'll clone the dying drive to an identical
> replacement.

> I ran the Western Digital diagnostics again and it says that everything
> is peachy.

After you have backed up, maybe connect the drive directly and
post its SMART attributes here. Maybe we can spot some problem.
I don't know the WD usilities, but for Maxtor both the disks and
the diag-software are over-optimistic in their thresholds. The
attributes themselves tell the true story, however.

Arno
 | 
Pages: 1
Prev: IDE DVD Burner in SATA PC
Next: Memory Upgrade