[GIT PATCH] USB fixes for 2.6.35-git
in [Kernel]
|
Prev: [GIT PATCH] TTY and serial fixes for .35-git
Next: [PATCH 09/11] serial: altera_uart: Proper section for altera_uart_remove
From: Greg KH on 4 Jun 2010 16:50 Here are a few USB bugfixes for your 2.6.35-git tree. The majority are for the s3c gadget driver, and the xhci host controller, with a smattering of other bugfixes. Please pull from: master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6.git/ Most of these patches have been in the linux-next and mm trees. The full patches will be sent to the linux-usb mailing list, if anyone wants to see them. thanks, greg k-h ------------ drivers/usb/class/cdc-acm.c | 6 ++- drivers/usb/core/driver.c | 2 + drivers/usb/gadget/Kconfig | 1 + drivers/usb/gadget/s3c-hsotg.c | 57 ++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-hcd.c | 20 ++++++++++-- drivers/usb/host/isp1362.h | 2 +- drivers/usb/host/xhci-pci.c | 2 + drivers/usb/host/xhci-ring.c | 31 ++++++++++++++++++- drivers/usb/host/xhci.c | 57 +++++++++++++++++++++++++++++----- drivers/usb/host/xhci.h | 12 +++++++ drivers/usb/serial/digi_acceleport.c | 3 +- drivers/usb/serial/ftdi_sio.c | 4 ++ drivers/usb/serial/mos7840.c | 1 - 13 files changed, 180 insertions(+), 18 deletions(-) --------------- Alan Stern (1): USB: unbind all interfaces before rebinding them Axel Lin (1): USB: cdc-acm: fix resource reclaim in error path of acm_probe Ben Dooks (3): USB: s3c-hsotg: Ensure TX FIFO addresses setup when initialising FIFOs USB: s3c-hsotg: SoftDisconnect minimum 3ms USB: s3c-hsotg: Ensure FIFOs are fully flushed after layout Daniel Mack (1): USB: ftdi_sio: fix DTR/RTS line modes Grant Likely (1): usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected Johan Hovold (1): USB: mos7840: fix null-pointer dereference Julia Lawall (1): USB: serial: digi_acceleport: Eliminate a NULL pointer dereference Maurus Cuelenaere (1): USB: s3c_hsotg: define USB_GADGET_DUALSPEED in Kconfig Mike Frysinger (1): USB: isp1362: fix inw warning on Blackfin systems Sarah Sharp (3): USB: xhci: Wait for controller to be ready after reset. USB: xhci: Wait for host to start running. USB: xhci: Print NEC firmware version. Thomas Abraham (1): USB: s3c: Enable soft disconnect during initialization -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |