Prev: Scan Slides - Epson V500 Recommended Dpi and Bit settings
Next: Fujitsu FI 5650C Paper Problems
From: Ken Rogers on 7 Aug 2008 06:39
I had to pull apart my 5610 and a little plastic strip came out and I
don't know where it goes.. Now copy and scan don't work and I
suspect it's this missing strip.

Anyone have a working 5610 or a detailed repair manual and
can tell me where this strip goes?

It is 9" by 1/2" by 0.035" thick with a nub sticking out along one
edge with the label:
PLATE-CALIBRATION
JB61-00305A
>HIPS< #2-3
I'd sure appreciate help.
Thanks, Ken Rogers

From: CSM1 on 7 Aug 2008 06:55
"Ken Rogers" <kendelerogers(a)yahoo.com> wrote in message
news:65kl94lc01tnm529vk7fkmopdkq2puk14o(a)4ax.com...
>I had to pull apart my 5610 and a little plastic strip came out and I
> don't know where it goes.. Now copy and scan don't work and I
> suspect it's this missing strip.
>
> Anyone have a working 5610 or a detailed repair manual and
> can tell me where this strip goes?
>
> It is 9" by 1/2" by 0.035" thick with a nub sticking out along one
> edge with the label:
> PLATE-CALIBRATION
> JB61-00305A
>>HIPS< #2-3
> I'd sure appreciate help.
> Thanks, Ken Rogers
>

If the strip is White, it is the calibration strip and goes where the sensor
rests.

Example of a Canon 8400F Scanner. The white strip in the cover is the
calibration strip.
Picture:
http://www.carlmcmillan.com/CanonScanner/PC301766.JPG

Above picture is from this page:
http://www.carlmcmillan.com/CanonScanner/Canon.htm

It is ten images down from the top of page.


--
CSM1
http://www.carlmcmillan.com
--


From: Ken Rogers on 7 Aug 2008 07:04
THANKS! I think I can get it now. I hope that fixes it!

Ken

On Thu, 7 Aug 2008 05:55:23 -0500, "CSM1" <nomoremail(a)nomail.com>
wrote:

>"Ken Rogers" <kendelerogers(a)yahoo.com> wrote in message
>news:65kl94lc01tnm529vk7fkmopdkq2puk14o(a)4ax.com...
>>I had to pull apart my 5610 and a little plastic strip came out and I
>> don't know where it goes.. Now copy and scan don't work and I
>> suspect it's this missing strip.
>>
>> Anyone have a working 5610 or a detailed repair manual and
>> can tell me where this strip goes?
>>
>> It is 9" by 1/2" by 0.035" thick with a nub sticking out along one
>> edge with the label:
>> PLATE-CALIBRATION
>> JB61-00305A
>>>HIPS< #2-3
>> I'd sure appreciate help.
>> Thanks, Ken Rogers
>>
>
>If the strip is White, it is the calibration strip and goes where the sensor
>rests.
>
>Example of a Canon 8400F Scanner. The white strip in the cover is the
>calibration strip.
>Picture:
>http://www.carlmcmillan.com/CanonScanner/PC301766.JPG
>
>Above picture is from this page:
>http://www.carlmcmillan.com/CanonScanner/Canon.htm
>
>It is ten images down from the top of page.
>
>
>--
>CSM1
>http://www.carlmcmillan.com

From: Ken Rogers on 7 Aug 2008 07:40
Yep, that got it. Now the 5610 is working fine!
THANK YOU! THANK YOU! THANK YOU! THANK YOU! THANK YOU!

Best to you, Ken Rogers

On Thu, 7 Aug 2008 05:55:23 -0500, "CSM1" <nomoremail(a)nomail.com>
wrote:

>"Ken Rogers" <kendelerogers(a)yahoo.com> wrote in message
>news:65kl94lc01tnm529vk7fkmopdkq2puk14o(a)4ax.com...
>>I had to pull apart my 5610 and a little plastic strip came out and I
>> don't know where it goes.. Now copy and scan don't work and I
>> suspect it's this missing strip.
>>
>> Anyone have a working 5610 or a detailed repair manual and
>> can tell me where this strip goes?
>>
>> It is 9" by 1/2" by 0.035" thick with a nub sticking out along one
>> edge with the label:
>> PLATE-CALIBRATION
>> JB61-00305A
>>>HIPS< #2-3
>> I'd sure appreciate help.
>> Thanks, Ken Rogers
>>
>
>If the strip is White, it is the calibration strip and goes where the sensor
>rests.
>
>Example of a Canon 8400F Scanner. The white strip in the cover is the
>calibration strip.
>Picture:
>http://www.carlmcmillan.com/CanonScanner/PC301766.JPG
>
>Above picture is from this page:
>http://www.carlmcmillan.com/CanonScanner/Canon.htm
>
>It is ten images down from the top of page.
>
>
>--
>CSM1
>http://www.carlmcmillan.com

From: Ken Rogers on 7 Aug 2008 08:45
One final thank-you note. After I gave up on help from HP, I posted
the newsnet requests. The total time trying to get help from HP was
probably 3 hours. The time it took to get the CSM1 response, its
relevance and precision, allowed me to fix the printer and get it
working in about an hour. So newsnet plus CSM1 is worth three
time HP's worth! :)

Good guy this CSM1!

Best to all, Ken

On Thu, 7 Aug 2008 05:55:23 -0500, "CSM1" <nomoremail(a)nomail.com>
wrote:

>"Ken Rogers" <kendelerogers(a)yahoo.com> wrote in message
>news:65kl94lc01tnm529vk7fkmopdkq2puk14o(a)4ax.com...
>>I had to pull apart my 5610 and a little plastic strip came out and I
>> don't know where it goes.. Now copy and scan don't work and I
>> suspect it's this missing strip.
>>
>> Anyone have a working 5610 or a detailed repair manual and
>> can tell me where this strip goes?
>>
>> It is 9" by 1/2" by 0.035" thick with a nub sticking out along one
>> edge with the label:
>> PLATE-CALIBRATION
>> JB61-00305A
>>>HIPS< #2-3
>> I'd sure appreciate help.
>> Thanks, Ken Rogers
>>
>
>If the strip is White, it is the calibration strip and goes where the sensor
>rests.
>
>Example of a Canon 8400F Scanner. The white strip in the cover is the
>calibration strip.
>Picture:
>http://www.carlmcmillan.com/CanonScanner/PC301766.JPG
>
>Above picture is from this page:
>http://www.carlmcmillan.com/CanonScanner/Canon.htm
>
>It is ten images down from the top of page.
>
>
>--
>CSM1
>http://www.carlmcmillan.com

 |  Next  |  Last
Pages: 1 2
Prev: Scan Slides - Epson V500 Recommended Dpi and Bit settings
Next: Fujitsu FI 5650C Paper Problems