Prev: Followup on Canon dye vs pigment and IP3000 vs IP4000
Next: Canon S520
From: Pete on 23 Apr 2005 00:17
Hi everyone,

I just downloaded and installed a new printer driver for my Deskjet 932C so
it would be compatible with my new computer which has windows XP in it. It
prints okay, but makes strange scraping type noises when it loads the paper
and a squeaking type noise when it is rolling the paper out (like something
needs oiling).

It worked fine before I put the new driver in. Is there any way at all that
the driver could be causing the noise (e.g., could it be sending some kind
of distorted signal causing erratic movement in the mechanical parts of the
machine).

If not, then it must be a coincidence, and it needs oiling somewhere or it
has just pooped out. It is only 4 years old and I don't use it that much.
By looking inside with the top lifted I can see a couple of white plastic
gears (probably Teflon coated or something like that) to the left. Can't
see much to the right because the print cartridges are parked in the way
when you lift to top. There are obviously some kind of bearings or bushings
that the main roller sets in. Maybe they need oiling also.

If someone can tell me what needs oiling and how to get at it, I would
appreciate it. Or if you aren't supposed to oil anything, then tell me
that. I have some fine "super lube with Teflon" that I use for my
grandfather clock. I would think that would be okay if it does need oiling.

Your comments will be greatly appreciated. Thanks.

Pete


From: Jan on 23 Apr 2005 00:23
In article <3%jae.103576$cg1.66667(a)bgtnsc04-news.ops.worldnet.att.net>,
petesworkshop(a)nospam.att.net says...
> Hi everyone,
>
> I just downloaded and installed a new printer driver for my Deskjet 932C so
> it would be compatible with my new computer which has windows XP in it. It
> prints okay, but makes strange scraping type noises when it loads the paper
> and a squeaking type noise when it is rolling the paper out (like something
> needs oiling).
>
> It worked fine before I put the new driver in. Is there any way at all that
> the driver could be causing the noise (e.g., could it be sending some kind
> of distorted signal causing erratic movement in the mechanical parts of the
> machine).
>
> If not, then it must be a coincidence, and it needs oiling somewhere or it
> has just pooped out. It is only 4 years old and I don't use it that much.
> By looking inside with the top lifted I can see a couple of white plastic
> gears (probably Teflon coated or something like that) to the left. Can't
> see much to the right because the print cartridges are parked in the way
> when you lift to top. There are obviously some kind of bearings or bushings
> that the main roller sets in. Maybe they need oiling also.
>
> If someone can tell me what needs oiling and how to get at it, I would
> appreciate it. Or if you aren't supposed to oil anything, then tell me
> that. I have some fine "super lube with Teflon" that I use for my
> grandfather clock. I would think that would be okay if it does need oiling.
>
> Your comments will be greatly appreciated. Thanks.
>
> Pete
>
>
>
I had a 932C and it used to make noises and always sounded like a spring
was going to sproing along with some creaking, etc. but it worked great.
I had it for 2 years before giving to my sister and she still uses it. I
think it is just the nature of this particular printer.
--

Cheers!

Jan
From: aditya_vh@indiatimes.com on 23 Apr 2005 10:30
dear pete,

it is not the drivers issue.what u need is just a bit of servicing of
the printer. just apply some oil to the rod and just clean the paper
sensor and paper loader.


regards
aditya

From: Pete on 23 Apr 2005 13:44
Aditya...Can you be a little more specific on how/where to apply oil to the
rod and how/where to clean the paper sensor and paper holder. I am a
technical person, but I just don't want to make anything worse.
Thanks...Pete

<aditya_vh(a)indiatimes.com> wrote in message
news:1114266628.483633.206830(a)o13g2000cwo.googlegroups.com...
> dear pete,
>
> it is not the drivers issue.what u need is just a bit of servicing of
> the printer. just apply some oil to the rod and just clean the paper
> sensor and paper loader.
>
>
> regards
> aditya
>


From: Bob Headrick on 23 Apr 2005 14:28

"Pete" <petesworkshop(a)nospam.att.net> wrote in message
news:sQvae.632540$w62.517080(a)bgtnsc05-news.ops.worldnet.att.net...
> Aditya...Can you be a little more specific on how/where to apply oil to the
> rod and how/where to clean the paper sensor and paper holder. I am a
> technical person, but I just don't want to make anything worse.

Oiling the carriage rod is not recommended as it can cause fibers and gunk to
collect on the carriage rod. If you must oil it, turn on the printer, open the
lid allowing the carriage to move to the center. Now unplug the printer. Put
one drop (no more) of light oil such as 3-in-one on each side of the carriage,
then move it back and forth by hand a few times.

Regards,
Bob Headrick, not speaking for my employer HP


 |  Next  |  Last
Pages: 1 2
Prev: Followup on Canon dye vs pigment and IP3000 vs IP4000
Next: Canon S520