Home Built PC
in [Hardware]
|
WTB: DELL XP PRO RESTORE PACKS AND OR CD's SEALED IN WHITE ENVELOPES WTB: DELL XP PRO RESTORE PACKS AND OR CD's SEALED IN WHITE ENVELOPES I am looking to buy 1,000's of DELL XP PRO RESTORE PACKS which includes the manual, Restore CD sealed. I will buy them in the 100's or 1,000's.. Email buynetworks(a)gmail.com PLEASE LOOK BELOW AT ALL OF MY WANT TO BUYS.. PLEASE SCROLL AL... 6 May 2008 23:24
Setting up a computer in a restaurant kitchen I am looking into setting up a computer and lcd monitor in a restaurant kitchen in close proximity to a very greasy area of the kitchen for the purpose of the cooks being able to see food orders placed by customers. I want to know if there are any inexpensive products available to protect the devices from greas... 7 May 2008 15:53
Same specs, different prices: DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Matt <matt(a)themattfella.xxxyyz.com> wrote: At http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010170147+50008476+1052420643+1052308477&name=2GB+(2+x+1GB) I see three RAM-stick pairs, all from the same manufacturer, that seem to have the same timing specs. But they differ in model number, ... 6 May 2008 23:24
Same specs, different prices: DDR2 SDRAM DDR2 1066 (PC2 8500) DualChannel Kit At http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010170147+50008476+1052420643+1052308477&name=2GB+(2+x+1GB) I see three RAM-stick pairs, all from the same manufacturer, that seem to have the same timing specs. But they differ in model number, price and voltage specs, the more expensive ones havin... 6 May 2008 23:24
Moving XP to RAID array - driver question Hi, I have a PC setup with a single hard drive and I want to use Partition Magic to move it to a RAID array in a new PC I'm building. The new PC will have a different chipset and also an IC9R based RAID5 array. Obviously my existing XP installation doesn't have drivers loaded for either of these so my questi... 6 May 2008 23:24
Setting up a computer in a restaurant kitchen mizerydearia wrote: I am looking into setting up a computer and lcd monitor in a restaurant kitchen in close proximity to a very greasy area of the kitchen for the purpose of the cooks being able to see food orders placed by customers. I want to know if there are any inexpensive products available to ... 6 May 2008 23:24
Is there a free ISP for testing a modem just-me(a)myplace.com wrote: I have a dialup ISP and the connection recently got very slow. Although I pay them a premium price for their service, their support is terrible. I have run every test on my computer and modem and everything seems fine. I had the phone company call me and say the phone line se... 6 May 2008 23:24
Moving XP to RAID array - driver question > I don't think it's possible, at the very least you should have to do a "Repair Install" (at which point you can add RAID-drivers), after which you have to install chipset drivers, graphics drivers etc. and do the full WinUpdate round... http://www.michaelstevenstech.com/XPrepairinstall.htm I may... 6 May 2008 22:20
Testing old IDE hard drives Recently, I acquired - legitimately with previous owners agreement, etc. - a number of older IDE drives. The owners have asked me to recover and archive any useful data and then use, or junk, the drives however I want. My issue is this: all of the drives were used as the boot/system drive on the PC's they were pu... 6 May 2008 23:24
Laser printers lifetime Just took delivery of a Brother HL-2170W monochrome laser printer. Curious as to whether or not it should be left on 24/7. A Google search was inconclusive since many of the postings were either very dated or got off topic. Discounting electrical consumption is it better or worse for the printer to be lef... 6 May 2008 23:24 |