HydraXC + EDK
in [FPGA]
|
Prev: video stream transfer via UART and Bluetooth in FPGA
Next: video stream transfer via UART and Bluetooth in FPGA
From: u_stadler on 24 Apr 2008 09:34 HI, I'm struggling with an EDK project and a HydraXC here. First of all I can't get the Hydra to work. I loaded a sample design (PPC linux) from the CD onto the SD card, inserted it and turned on the power. Shouldn't I see some output on the RS232 (set to 19200). About the power. I found in the documentation that it needs a 3,3 V supply but the leds on the board only turn on if I use 5V. the HydraXC (its a XC50) is sitting on an eval board (Evalboard S V1.0) so I assume there is a 5V to 3,3 regulator but I cant find any documentation for it. Any ideas or links here? The other thing is with my EDK Design. I'm using a power pc in it and just wanted to create s simple "hello world" for now. I generate the bit file and then copy it onto the SD card right? Is there perhaps a tutorial for how to create an EDK project for the hydra? I can't really find any documentation or tutorial for the hydra besides the HydraXC user manual (V 2006). thanks Urban
From: Antti on 24 Apr 2008 10:49
On 24 Apr., 15:34, "u_stad...(a)yahoo.de" <u_stad...(a)yahoo.de> wrote: > HI, > > I'm struggling with an EDK project and a HydraXC here. First of all I > can't get the Hydra to work. I loaded a sample design (PPC linux) from > the CD onto the SD card, inserted it and turned on the power. > Shouldn't I see some output on the RS232 (set to 19200). > About the power. I found in the documentation that it needs a 3,3 V > supply but the leds on the board only turn on if I use 5V. the HydraXC > (its a XC50) is sitting on an eval board (Evalboard S V1.0) so I > assume there is a 5V to 3,3 regulator but I cant find any > documentation for it. > Any ideas or links here? > > The other thing is with my EDK Design. I'm using a power pc in it and > just wanted to create s simple "hello world" for now. I generate the > bit file and then copy it onto the SD card right? Is there perhaps a > tutorial for how to create an EDK project for the hydra? I can't > really find any documentation or tutorial for the hydra besides the > HydraXC user manual (V 2006). > > thanks > Urban you should info as needed from there: http://www.ebmhydraxc.com/ but support from there links to site maintained by ME, and I just now did take it offline. anyway EDK reference designs are delivered on the support DVD, so just take it from there. Antti Lukats |