First  |  Prev |  Next  |  Last
Pages: 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708
IPVS: Incorrect helper use for SCTP [was: wensong@linux-vs.org, horms@verge.net.au]
[CCed netdev] Thanks, that looks correct to me. Have you tested this change? If so could you provided a Signed-off-by line as per section 12 of Documentation/SubmittingPatches? On Wed, Jul 07, 2010 at 05:19:06PM +0800, xiaoyu Du wrote: Hiļ¼Œall After I compared the sctp with tcp and udp, I thinkt his... 7 Jul 2010 09:02
firewire: cdev: check write quadlet request length to avoid buffer overflow
Stefan Richter wrote: [...] Thus the only problem is that a bogus write quadlet request with user-specified length of < 3 will put 1...4 random bytes into the packet payload. But this is the user's problem then, not the kernel's. But not being initialized, these are the kernel's bytes that get disclose... 7 Jul 2010 09:02
[PATCH 2/3] ocfs2: Zero the tail cluster when extending past i_size.
ocfs2's allocation unit is the cluster. This can be larger than a block or even a memory page. This means that a file may have many blocks in its last extent that are beyond the block containing i_size. There also may be more unwritten extents after that. When ocfs2 grows a file, it zeros the entire cluster in... 7 Jul 2010 07:57
[PATCH 0/3] ocfs2: Tail zeroing fixes.
This is version 3 of the ocfs2 tail zeroing fixes. This version has some major changes. Tao correctly pointed out that we can have multiple extents past i_size due to unwritten extents. I've reworked the zeroing code to walk them all. Since I had to do that, and I had to handle refcounted extents, I end up fix... 12 Jul 2010 19:37
gpio: sx150x: Add Semtech I2C sx150x gpio expander driver.
Hi Trilok, Gregory, On Wed, 07 Jul 2010 13:53:48 +0530, Trilok Soni wrote: On 7/7/2010 4:07 AM, Gregory Bean wrote: Add support for Semtech SX150-series I2C GPIO expanders. Compatible models include: 8 bits: sx1508q 16 bits: sx1509q Signed-off-by: Gregory Bean <gbean(a)codeauro... 22 Jul 2010 13:36
ERROR: Unable to locate IOAPIC for GSI xx
Noticed the following errors on 2.6.35-rc4 (IBM Thinkpad R51 2889SG1) (full details attached). ERROR: Unable to locate IOAPIC for GSI 13 ERROR: Unable to locate IOAPIC for GSI 8 ERROR: Unable to locate IOAPIC for GSI 1 ERROR: Unable to locate IOAPIC for GSI 12 ERROR: Unable to locate IOAPIC for GSI 6 I sa... 7 Jul 2010 07:57
[PATCH V4 1/5] mmc: Add erase, secure erase, trim and secure trim operations
From 7f01ad3c4be6ec09318176db12db66f353b526e0 Mon Sep 17 00:00:00 2001 From: Adrian Hunter <adrian.hunter(a)nokia.com> Date: Tue, 1 Jun 2010 13:20:22 +0300 Subject: [PATCH 1/5] mmc: Add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 car... 7 Jul 2010 07:57
[PATCH V4 4/5] block: Add secure discard
From 1cdd5b576bfafcd53857ed4d37830446e96e8206 Mon Sep 17 00:00:00 2001 From: Adrian Hunter <adrian.hunter(a)nokia.com> Date: Wed, 23 Jun 2010 15:41:38 +0300 Subject: [PATCH 4/5] block: Add secure discard Secure discard is the same as discard except that all copies of the discarded sectors (perhaps created by garba... 7 Jul 2010 07:57
[PATCH V4 2/5] mmc_block: Add discard support
From 3f40c236b15902aa878640d89bc11dd0bc4511fc Mon Sep 17 00:00:00 2001 From: Adrian Hunter <adrian.hunter(a)nokia.com> Date: Thu, 3 Jun 2010 10:47:12 +0300 Subject: [PATCH 2/5] mmc_block: Add discard support Enable MMC to service discard requests. In the case of SD and MMC cards that do not support trim, discards... 7 Jul 2010 07:57
[PATCH V4 5/5] mmc_block: Add support for secure discard
From 548ec42c86a88092b92597ff2774691e5498974f Mon Sep 17 00:00:00 2001 From: Adrian Hunter <adrian.hunter(a)nokia.com> Date: Wed, 23 Jun 2010 15:55:50 +0300 Subject: [PATCH 5/5] mmc_block: Add support for secure discard Secure discard is implemented by Secure Trim if the discard is unaligned or Secure Erase otherw... 7 Jul 2010 07:57
First  |  Prev |  Next  |  Last
Pages: 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708