Linux Hardware
in [Linux and Unix]
|
feeding a FIFO from PCI Hi, I'm working on a proposal to design a box that will control a scientific gadget. Our box will output frequency sweeps, arbitrary waveforms, a couple of dozen voltages that can be changed/ramped per user desires, and some discrete logic levels and triggers. One architecture would pack an Intel-cpu SBC and a... 21 Apr 2008 09:18
Looking for advize on low power/small HW for Linux I browsed via Google to search for low power (<10W) hardware. Ideally it is some small piece of H/W with an internet RJ45 and some scandisk disk module to boot from into RAM (e.g. Puppy Linux). So once in RAM, speed shouldn't be a big concern anymore. There are quite some possibilities/solutions available. I ... 15 Apr 2008 18:43
Seeking recommendations for USB DAQ on Linux I'm looking for a simple data acquisition interface that will run on a Linux PC (Fedora Core 6). The requirements are very simple: 24 bits of digital output. We need to be able to flip single bits or groups of bits without causing glitches on unchanged bits. Data rate is slow - maybe one write every 2 millis... 20 Apr 2008 22:45
external system clock? Dear all I got a notebook that run out of battery on the mother board. Which means, every time it reboots, or shut down and start again, the system time goes back about 100 years. I can workaround this issue by running ntp client upon booting, but this notebook I used to take it everywhere (I am a heavy travel... 19 Apr 2008 20:17
/dev/ataraid mirror channging channels Hello! I have a Debian 3.1, kernel 2.4.36, with ATA133-Raid controller on board: RAID bus controller: Promise Technology, Inc. PDC20276 (MBFastTrak133 Lite) (rev 01) There are 2 HDDs connected to this controller in RAID 1 (mirror) configuration. They are visible as /dev/ataraid... /dev/ataraid/d0p1 on / ... 11 Apr 2008 06:52
Installing integrated device in Linux. Hi to all: I want to ask if some of you can help me trying to configure properly my Linux system... any help will be as a present for me, so thanks in advance! Last agoust I bought a new computer, not so special requirements as long is for programming and for being a personal server. That computer have ... 12 Apr 2008 08:43
Getting Video BIOS version from VGA controller How to get Video BIOS version from VGA controller. Is there any IOCTL call ? Or, the mechanism of fetching BIOS version different among VGA controllers. Thanks in advance, Arun ... 12 Apr 2008 14:18
Business Card Scanner Hi, Can anyone recommend a business card scanner with decent driver / application support in Linux (Mint 4.0 KDE at the moment). I'd prefer something specialised for the task, rather than a standard HP job. Thanks Sean ... 10 Apr 2008 05:21
Adware 911 - Run Linux and never be infested again! - www.Adware911.com Adware 911 - Run Linux and never be infested again! www.Adware911.com Check out the blog! ... 13 Apr 2008 04:34
problem with samsung S203D DVD writer on suse linux 10.2 Hi I had a LG writer wich has broken. It gaves me no problem (until it was broken). Now i've bought samsung, but im having a lot of problems, for example, i try to burn a data DVD with K3B and i have this error (burning does not begin): System ----------------------- K3b Version: 1.0.4 KDE Version: ... 9 Apr 2008 18:46 |