Linux Hardware
in [Linux and Unix]
|
SOLVED! Re: Mandriva 2008.1 broke my wireless Kevin the Drummer <nobody(a)tek.com> wrote: I've used my Compaq Armada E500 laptop with Mandriva since 2007.0. My Cisco wireless card has always worked without any issue using a Linux driver. I think it uses the airo_cs module, but it's hard for me to tell without reinstalling 2008.0. When I boot 2008... 16 Apr 2008 12:25
PCIe 2.0 software driver Hello, Does the standard software driver compliant with PCIe 2.0 specification identify two root complexes? +-------------+ | | | CPU | +------+------+ | | +----... 16 Apr 2008 05:48
54Mbps/PCMCIA wlan card for an X terminal? Markus Kossmann 写道: Zhang Weiwu wrote: Dear all [...] So the question is: does there exist a 54Mbps WLAN card that can work on 16-bit PCMCIA slot? AFAIK there doesn't exist such a card. At least the list on http://linux-wless.passys.nl/query_hostif.php?hostif=PCMCIA doesn't show any 802.1... 16 Apr 2008 01:51
Assistance starting DIY - H/W implementation over PCI/e I am somewhat experienced when it comes to hardware development on the older ISA and embedded SOC boards. However, I would like to get into h/w designing using PCI/e interfacing. What I need most is to find information on PCI/e hardward interfacing techniques, most probably a "HOWTO" on DIY hardware (using commer... 19 Apr 2008 18:42
Pre partitioned ext2 usb disk appears as fat32 by the debian installer On 2008-04-15, dave.dex(a)googlemail.com <dave.dex(a)googlemail.com> wrote: I'm trying to set up my NSLU2 with an 8GB USB drive as the main disk. I've been following http://www.cyrius.com/debian/nslu2/install.html however I have an issue. To prevent having the nslu2 perform the partitioning I've done this ... 15 Apr 2008 17:06
Pre partitioned ext2 usb disk appears as fat32 by the debian installer I'm trying to set up my NSLU2 with an 8GB USB drive as the main disk. I've been following http://www.cyrius.com/debian/nslu2/install.html however I have an issue. To prevent having the nslu2 perform the partitioning I've done this on my laptop using a live cd (fdisk, swapon, mke2fs, etc). When the debian install... 19 Apr 2008 08:21
Finding the presence of Internal Speaker - Buzzer Options Hi, I have two kind of systemsms which have Internal speaker - Buzzer or not. I need to find out the presence of Internal speaker - Buzzer. Is there any IOCTLs to get this detail ? Thanks, Arun ... 15 Apr 2008 02:34
hard drive size on a RAID1 array Hi all, I have two 500 GB hard drives that are configured in a raid 1 array. They are partitioned into two: a 20gb partition and a 480gb partition (with 2gb of swap). My problem is as follows: When I do df -h I get the following: Filesystem Size Used Avail Use% Mounted on /dev/md0 ... 16 Apr 2008 18:52
What could happened to my TV card? This happened to me some time ago (more than a year), but I was wondering if you could help me to know what happened to my TV card. This was an analog TV card (bt878) connected to a PCI slot. It worked ok until one day it stopped working. This is from /var/log/messages when it worked ok: kernel: Linux video ... 14 Apr 2008 18:37
USB boot I have a Dell Desktop E521. The HD is /dev/sda from Linux (Slackware). I want to be able to boot from the USB stick as well, where I have installed Knoppix. The Slackware system describes the USB as /dev/sdb, and the first partition is, natch, /dev/sdb1 (where I have installed Knoppix from DVD. I am trying to get ... 13 Apr 2008 11:56 |