|
Recommendation for a MultIicast Routing daemon for linux (PIM-V2) Hi, Could anybody recommend on a MultIicast Routing daemon for linux (PIM- V2) , for IPV4? I had seem that in the past there was some softwares from usc, but the link is no more valid (This link: http://netweb.usc.edu/pim/) Any ideas? Regards, IB ... 7 Apr 2008 07:46
Load balancing between two WAN gateways SLE wrote: Greetings, We are trying to load balance our WAN traffic for the LANs we are hosting. We would like to find a solution that would be transparent both for incoming and outgoing traffic. We can scheme the issue as follows : ISP1 ISP2 | | ... 6 Apr 2008 06:04
Network cards: eth0 - eth3 ? When I do "ip route show" or "ifconfig", I see eth0 eth1 eth3 lo Does it mean the computer has 3 network cards ? (sorry, I only have less than 5 hours with Linux Fedora) Thanks. ... 21 Apr 2008 11:42
problem with my remote machine we are using DSL line for our net connection, we are remotely access our machine. now we are facing problem that when there is any flutuation in the net my machine's top is raised exponentialy and dfunct are occured and lostly it is going for hardboot. Any one can give a resion and solution for that ........... ... 5 Apr 2008 12:05
Problem with Debian Etch and NTP I have installed Debian 4.0 Etch r3 i386 in my laptop and I have a strange problem with clock setting with NTP that I can't solve by my self. I use NTP to sync clock, and I think NTP configuration is well done, even time zones too. When I boot my laptop, my clock is always +2 hour over my current time. My n... 11 Apr 2008 10:17
Intel PCIe 1Gig NIC driver changes coming Folks - Auke Kok, one of the maintainers of the e1000/e1000e driver posted the following to a number of the linux development mailing lists. I am posting it here with Auke's permission to make sure that no one gets caught off-guard: From kernel 2.6.26 onward all *PCI Express* device IDs previously sup... 4 Apr 2008 18:00
DHCP client and ifconfig Hi all, I would to know how dhclient-script knows what dhclient gets into its DHCP offer. Thanks in advance, Thomas. ... 4 Apr 2008 10:07
Strange routing / NAT issue Something has changed with pogo.com again. I have a linux router. It has ethernet (192.168.1.*) and wireless (192.168.2.*). Everything works fine as far as connecting across interfaces and to the internet through a dialup connection (ppp0). Every once in while pogo.com screws up something and my mom is unable t... 9 Apr 2008 16:18
Routing to multiple gateways from a single NIC Hi, I've got a computer running RHEL with a single NIC that is multi-homed with a single default gateway for everything. eth0: 192.168.101.54/24 eth0:0 192.168.104.54/24 So far, everything is running fine. The machine is able to respond to requests coming in to 101.54 and 104.54 without any problems. Ho... 13 Apr 2008 19:57
Strange behavior of NetworkManager and keyring [Hardy andGutsy] On Tue, 01 Apr 2008 23:53:31 -0500 Ignoramus3733 <ignoramus3733(a)NOSPAM.3733.invalid> wrote: Ideally I would like NM to learn the passwords and just use them when necessary, without asking for a keyring password. Did you create a profile in NM and save it? -- Jerry Maguire: Help me... help you. Help m... 3 Apr 2008 16:54 |