Linux Networking
in [Network]
|
Selective routing / how to separate 2 subnets Hi, I have problem to separate 2 subnets: 192.168.0.64/26 192.168.0.128/26 Normally they are working togheter and everything is ok (I mean hosts from 192.168.0.64/26 cannot communicate with 192.168.0.128/26 hosts - according to ip theory :) ), but now i want to provide them with internet and i don't want ... 21 Apr 2008 05:06
Collaborative Whiteboarding http://pandaeatsbamboo.blogspot.com/2008/04/cisco-collaborative-whiteboarding.html ... 19 Apr 2008 03:24
'network unreachable' with PCMCIA card on Kubuntu Linux I have a Dell Latitude laptop on which I just loaded up release 7.04 of Kubuntu Linux. The install seems to have gone well except I have no access to my LAN through the ethernet port. When I try to "ping 192.168.2.1", I get the error message "connect: Network is unreachable". I'm fairly sure that it is not a ha... 18 Apr 2008 18:14
cvs question I work on a remote repository and the way I access is using ssh. With CVS, everytime I need to pass this option called 'CVS_RSH' to set the ssh binary and then can run any cvs operations. This is sometimes irritating as to I need to remember to set this variable everytime in my shell(I use hell a lot of termin... 20 Apr 2008 10:48
NFS root problem Hello all, Let me preface this by saying that I can mount the NFS directory just fine after booting off a local partition. What doesn't work is booting the root off NFS... Here are the kernel messages (yes it's an embedded PPC, but I don't think it's relevant to my case). 192.168.1.185 is the host PC, 200 i... 18 Apr 2008 11:02
When IPv6? There is much fuss about IPv6. Predictions seem to be to bring it in about 2 years hence. But a search at my ISP's site returned not one match. What are the latest guesses? Will Australia with its smaller population have IPv4 longer? (We are just closing down DCMA cellphone networks.) Doug. ... 21 Apr 2008 23:45
How to force card speed ? Hello all, when you have a network card that can do 10/100/1000, how can you force it to stay in 10Mbps ? After 20min of googling, I'm no closer to solving that one... -- Guillaume Dargaud http://www.gdargaud.net/ ... 18 Apr 2008 09:26
Redirecting ports in a bridge Hi. I have a linux appliance from Eneo Tech. (http:// www.eneotecnologia.com/) with the following setup: (192.168.1.x) 192.168.1.7 ---- SERVER1 192.168.2.1 [ LAN1 ] ----------- [ ROUTER ] ---------- [ APPLIANCE ] -------- [ LAN 2 ] --------| ... 18 Apr 2008 06:01
sk_buff & DMA I am having difficulty DMA'ing into sk_buffs. I have DMA code that works except when the destination is the data buffer in an sk_buff. No transfer error is reported in the status register but the sk_buff data buffer (the destination) is all zeros following the DMA while the source buffer is nonzero. I am running ... 23 Apr 2008 03:33
how to config the dns hi i would like to know how to configure the DNS Server in RHEL5 n FC8. pls provide me step by step configure step. thanku ... 21 Apr 2008 07:29 |