Network and Web
in [Network]
|
LAN connection not being made on boot Running XP Pro SP1 on my desktop PC for 3 yrs or so, using a BT (UK) router as my gateway. Suddenly whenever I boot the PC it no longer sees the gateway and ping doesn't work - doesn't even see itself any more. I have found that the only workaround is to use the Network Setup Wizard to create a new connection,... 1 May 2008 12:58
File & Print Sharing via Wireless Access Point Hi, A little background. I have 1 PC (XP PRo SP2) connected via ethernet to a Netgear DG834GT adls/ router. I also have 2 laptops (1 XP Pro SP2 and 1 Vista HP) connected wirelessly. I also have a canon printer attached via USB to the PC. This set up works fine, internet, file and print sharing...everythi... 7 May 2008 03:29
how to make all print out go to server? Hithere, I have few computers; they all have XP professional installed, one of them acting as a server; how can I make all the print out go to the server directly so that I can control them from there. I need to save unessacery print out. At the moment all the workstation print out directly to the printer. ... 1 May 2008 09:50
Upnp - internet connection icon in system tray I am using Windows XP Pro SP2. I have recently lost the Internet Connection Icon from the System Tray, however the Cable connection is work fine; how can I get the icon to display again. Can anyone help? Nevio ... 1 May 2008 07:17
sending & receiving of data through network im having network connection with a server and 12 client computers one of my computer is showing the connection is connected with 100mbps but in the status its only receiving the data not sending at all, sending data is 0 always. when i connect other wire its ok. i checked with crimping also i tried almost 10 r... 1 May 2008 09:50
DHCP Client Have Windows XP SP2 with all the avaliable updates (critical and optional) installed. My laptop connected to a Windows SBS 2003 network with DHCP server at work and gets the IP address of 192.168.0.56 I take it home and plug it into home network, which also uses DHCP, and I get a new IP address 192.168.0.10... 1 May 2008 09:50
Printer shares require username and password? I am having a problem with a simple XP pro (SP2)system (server) when I set the printer to share over the network on the client machine I can see the server but the printer share does not show up! when I try to add a network printer. If i type in the path to the printer ie:\\server\lexmarkE the client computer r... 1 May 2008 13:45
net use /persistent does not work anymore Hi, I used a mapping of the lpt2: port from a workgroup member computer with XP Home to a share of a domain member computer with XP Professional for a long time and it worked without problems. Now I had to replace this XP Professional computer by a Vista Professional computer. I used the same net use command... 30 Apr 2008 23:29
"Log On" required? My wife's new computer is visible in the "View Workgroup PC's" (but not My Network) but when I click it I get a "Log-On" window. That PC is not password protected, it just comes on when you start. It has no firewall, (XP SP1) I tried leaving it blank, no luck. When I right-click>Properties a "BONK" ..."You do n... 4 May 2008 16:35
Can't Map a drive after VPN'd in Hello Guru's I am having a problem using the CMAK tool and mapping network drives. I want a one click fits all for my VPN users. A file I can send them without having to walk them through an install and setting up tedious stuff like map network drives. I want the CMAK to do it for them. I am having a problem s... 1 May 2008 16:06 |