Prev: p5n-t and ad1988 realtek issue.. coax and analog audio wont come out at same time
Next: VT-d support on P5E-WS-PRO
From: gg on 17 Jun 2008 13:33
Congratulations.
Wonderful to hear you have great success with Dominator despite they are not
on the Asus QVL

just to confirm, can you give us you full configuration
4x2GB Dominator DDR2 1066?
core2 quad ? run at what speed?
external graphics cards? make and model?..
make and model of PSU
Case?
disk drives.

Also were the Kingston your tried: the 4x2GB 800Mhz or 1066Mhz?
Thank you

"Mr. Slither2u" <slither(a)snake.pit> wrote in message
news:h3od54ld840bqjhab1o8c30b1egfdtetk6(a)4ax.com...
> On Thu, 05 Jun 2008 00:37:32 +0100, Andy Burns
> <usenet.april2008(a)adslpipe.co.uk> wrote:
>
<snipped>
> I know this is a little late but I just saw your post. I have had
> memory problems with a P5E WS Pro also. Ballistics ran for a month or
> so at 1066 set in the bios and then caused multiple BSOD's. Replaced
> with G.Skill and the system would not post. Replaced with Kingston and
> they ran ok set at 800 set in the bios. Finally, replaced with Corsair
> Dominator and they ran immediately at 1066 with the dram speed set to
> auto in the bios. They are still running and system is really snappy.
> Running the latest bios version 0603. The funny thing is that with the
> Kingston it took a long time to post. With the dominator it posts in
> just a few seconds.



From: Mr. Slither2u on 18 Jun 2008 09:03
Sure.
4X2GB Corsair Dominator 1066
QX6700 at 1066
Nvidia Gforce 9600 GTX
PC Power and cooling silencer 750 Watt quad
Thermaltake Armor Black ATX Full Tower Case
3 WD7500AAKS drives

The kingston memory was 800Mhz

On Tue, 17 Jun 2008 17:33:52 GMT, "gg" <gg(a)Edm.noMail.net> wrote:

>Congratulations.
>Wonderful to hear you have great success with Dominator despite they are not
>on the Asus QVL
>
>just to confirm, can you give us you full configuration
> 4x2GB Dominator DDR2 1066?
> core2 quad ? run at what speed?
> external graphics cards? make and model?..
> make and model of PSU
> Case?
> disk drives.
>
>Also were the Kingston your tried: the 4x2GB 800Mhz or 1066Mhz?
>Thank you
>
>"Mr. Slither2u" <slither(a)snake.pit> wrote in message
>news:h3od54ld840bqjhab1o8c30b1egfdtetk6(a)4ax.com...
>> On Thu, 05 Jun 2008 00:37:32 +0100, Andy Burns
>> <usenet.april2008(a)adslpipe.co.uk> wrote:
>>
><snipped>
>> I know this is a little late but I just saw your post. I have had
>> memory problems with a P5E WS Pro also. Ballistics ran for a month or
>> so at 1066 set in the bios and then caused multiple BSOD's. Replaced
>> with G.Skill and the system would not post. Replaced with Kingston and
>> they ran ok set at 800 set in the bios. Finally, replaced with Corsair
>> Dominator and they ran immediately at 1066 with the dram speed set to
>> auto in the bios. They are still running and system is really snappy.
>> Running the latest bios version 0603. The funny thing is that with the
>> Kingston it took a long time to post. With the dominator it posts in
>> just a few seconds.
>
>
From: gg on 18 Jun 2008 14:44
thank you

so you are using Kentfield's quad at stock speed of 2.66Ghz?

wonder if one can run Q9450 12M L2 (2.66Ghz) at 1333 instead of the QX6700
on this board and still get the same 8GB setup at 1066.?

yes Q9450 at $386 is not cheap but is a lot cheaper the extreme version a
few months back and is not so bad when amortized over 4 or 5 years


"Mr. Slither2u" <slither(a)snake.pit> wrote in message
news:id1i54llsgjmm8ormfgst6kp51en4lp46u(a)4ax.com...
> Sure.
> 4X2GB Corsair Dominator 1066
> QX6700 at 1066
> Nvidia Gforce 9600 GTX
> PC Power and cooling silencer 750 Watt quad
> Thermaltake Armor Black ATX Full Tower Case
> 3 WD7500AAKS drives
>
> The kingston memory was 800Mhz
>
> On Tue, 17 Jun 2008 17:33:52 GMT, "gg" <gg(a)Edm.noMail.net> wrote:
>
> >Congratulations.
> >Wonderful to hear you have great success with Dominator despite they are
not
> >on the Asus QVL
> >
> >just to confirm, can you give us you full configuration
> > 4x2GB Dominator DDR2 1066?
> > core2 quad ? run at what speed?
> > external graphics cards? make and model?..
> > make and model of PSU
> > Case?
> > disk drives.
> >
> >Also were the Kingston your tried: the 4x2GB 800Mhz or 1066Mhz?
> >Thank you
> >
> >"Mr. Slither2u" <slither(a)snake.pit> wrote in message
> >news:h3od54ld840bqjhab1o8c30b1egfdtetk6(a)4ax.com...
> >> On Thu, 05 Jun 2008 00:37:32 +0100, Andy Burns
> >> <usenet.april2008(a)adslpipe.co.uk> wrote:
> >>
> ><snipped>
> >> I know this is a little late but I just saw your post. I have had
> >> memory problems with a P5E WS Pro also. Ballistics ran for a month or
> >> so at 1066 set in the bios and then caused multiple BSOD's. Replaced
> >> with G.Skill and the system would not post. Replaced with Kingston and
> >> they ran ok set at 800 set in the bios. Finally, replaced with Corsair
> >> Dominator and they ran immediately at 1066 with the dram speed set to
> >> auto in the bios. They are still running and system is really snappy.
> >> Running the latest bios version 0603. The funny thing is that with the
> >> Kingston it took a long time to post. With the dominator it posts in
> >> just a few seconds.
> >
> >


 | 
Pages: 1
Prev: p5n-t and ad1988 realtek issue.. coax and analog audio wont come out at same time
Next: VT-d support on P5E-WS-PRO