Prev: [PATCH 0/15] STAGING: add lirc device drivers
Next: [PATCH 03/15] staging/lirc: add lirc_i2c driver
From: Jarod Wilson on 26 Jul 2010 19:30

Signed-off-by: Jarod Wilson <jarod(a)redhat.com>
---
drivers/staging/lirc/lirc_ene0100.c | 646 +++++++++++++++++++++++++++++++++++
drivers/staging/lirc/lirc_ene0100.h | 169 +++++++++
2 files changed, 815 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/lirc/lirc_ene0100.c
create mode 100644 drivers/staging/lirc/lirc_ene0100.h

diff --git a/drivers/staging/lirc/lirc_ene0100.c b/drivers/staging/lirc/lirc_ene0100.c
new file mode 100644
index 0000000..a152c52
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ene0100.c
@@ -0,0 +1,646 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
+ *
+ * Copyright (C) 2009 Maxim Levitsky <maximlevitsky(a)gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include "lirc_ene0100.h"
+
+static int sample_period = 75;
+static int enable_idle = 1;
+static int enable_learning;
+
+static void ene_set_idle(struct ene_device *dev, int idle);
+static void ene_set_inputs(struct ene_device *dev, int enable);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ return inb(dev->hw_io + ENE_IO);
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ outb(value, dev->hw_io + ENE_IO);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+ u16 reg, u8 value, u8 mask)
+{
+ u8 regvalue;
+
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+ regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+ regvalue |= (value & mask);
+ outb(regvalue, dev->hw_io + ENE_IO);
+}
+
+/* read irq status and ack it */
+static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
+{
+ u8 irq_status;
+ u8 fw_flags1, fw_flags2;
+
+ fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+
+ if (buffer_pointer)
+ *buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
+
+ if (dev->hw_revision < ENE_HW_C) {
+ irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+ if (!(irq_status & ENEB_IRQ_STATUS_IR))
+ return 0;
+ ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+ irq_status & ~ENEB_IRQ_STATUS_IR);
+
+ /* rev B support only recieving */
+ return ENE_IRQ_RX;
+ }
+
+ irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+ if (!(irq_status & ENEC_IRQ_STATUS))
+ return 0;
+
+ /* original driver does that twice - a workaround ? */
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+ /* clear unknown flag in F8F9 */
+ if (fw_flags2 & ENE_FW2_IRQ_CLR)
+ ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+ /* check if this is a TX interrupt */
+ fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+
+ if (fw_flags1 & ENE_FW1_TXIRQ) {
+ ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+ return ENE_IRQ_TX;
+ } else
+ return ENE_IRQ_RX;
+}
+
+static int ene_hw_detect(struct ene_device *dev)
+{
+ u8 chip_major, chip_minor;
+ u8 hw_revision, old_ver;
+ u8 tmp;
+ u8 fw_capabilities;
+
+ tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+ chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+ chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+ hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+ old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+ if (hw_revision == 0xFF) {
+
+ ene_printk(KERN_WARNING, "device seems to be disabled\n");
+ ene_printk(KERN_WARNING,
+ "send a mail to lirc-list(a)lists.sourceforge.net\n");
+ ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x33) {
+ ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_C;
+ ene_printk(KERN_WARNING,
+ "KB3926C detected, driver support is not complete!\n");
+
+ } else if (old_ver == 0x24 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_B;
+ ene_printk(KERN_NOTICE, "KB3926B detected\n");
+ } else {
+ dev->hw_revision = ENE_HW_D;
+ ene_printk(KERN_WARNING,
+ "unknown ENE chip detected, assuming KB3926D\n");
+ ene_printk(KERN_WARNING, "driver support incomplete");
+
+ }
+
+ ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
+ chip_major, chip_minor, old_ver, hw_revision);
+
+
+ /* detect features hardware supports */
+
+ if (dev->hw_revision < ENE_HW_C)
+ return 0;
+
+ fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+
+ dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+ dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+ dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+ fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
+
+ ene_printk(KERN_NOTICE, "hardware features:\n");
+ ene_printk(KERN_NOTICE,
+ "learning and tx %s, gpio40_learn %s, fan_in %s\n",
+ dev->hw_learning_and_tx_capable ? "on" : "off",
+ dev->hw_gpio40_learning ? "on" : "off",
+ dev->hw_fan_as_normal_input ? "on" : "off");
+
+ if (!dev->hw_learning_and_tx_capable && enable_learning)
+ enable_learning = 0;
+
+ if (dev->hw_learning_and_tx_capable) {
+ ene_printk(KERN_WARNING,
+ "Device supports transmitting, but the driver doesn't\n");
+ ene_printk(KERN_WARNING,
+ "due to lack of hardware to test against.\n");
+ ene_printk(KERN_WARNING,
+ "Send a mail to: lirc-list(a)lists.sourceforge.net\n");
+ }
+ return 0;
+}
+
+/* hardware initialization */
+static int ene_hw_init(void *data)
+{
+ u8 reg_value;
+ struct ene_device *dev = (struct ene_device *)data;
+ dev->in_use = 1;
+
+ if (dev->hw_revision < ENE_HW_C) {
+ ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+ ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+ } else {
+ reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+ reg_value |= ENEC_IRQ_UNK_EN;
+ reg_value &= ~ENEC_IRQ_STATUS;
+ reg_value |= (dev->irq & ENEC_IRQ_MASK);
+ ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+ ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+ }
+
+ ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+ ene_set_inputs(dev, enable_learning);
+
+ /* set sampling period */
+ ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+ /* ack any pending irqs - just in case */
+ ene_hw_irq_status(dev, NULL);
+
+ /* enter idle mode */
+ ene_set_idle(dev, 1);
+
+ /* enable firmware bits */
+ ene_hw_write_reg_mask(dev, ENE_FW1,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ);
+ /* clear stats */
+ dev->sample = 0;
+ return 0;
+}
+
+/* this enables gpio40 signal, used if connected to wide band input*/
+static void ene_enable_gpio40(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
+ 0 : ENE_CIR_CONF2_GPIO40DIS,
+ ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables the classic sampler */
+static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
+}
+
+/* this enables recieve via fan input */
+static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
+{
+ if (!enable)
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+ else {
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+ }
+ dev->fan_input_inuse = enable;
+}
+
+/* determine which input to use*/
+static void ene_set_inputs(struct ene_device *dev, int learning_enable)
+{
+ ene_enable_normal_recieve(dev, 1);
+
+ /* old hardware doesn't support learning mode for sure */
+ if (dev->hw_revision <= ENE_HW_B)
+ return;
+
+ /* reciever not learning capable, still set gpio40 correctly */
+ if (!dev->hw_learning_and_tx_capable) {
+ ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
+ return;
+ }
+
+ /* enable learning mode */
+ if (learning_enable) {
+ ene_enable_gpio40(dev, dev->hw_gpio40_learning);
+
+ /* fan input is not used for learning */
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_recieve(dev, 0);
+
+ /* disable learning mode */
+ } else {
+ if (dev->hw_fan_as_normal_input) {
+ ene_enable_fan_recieve(dev, 1);
+ ene_enable_normal_recieve(dev, 0);
+ } else
+ ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
+ }
+
+ /* set few additional settings for this mode */
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
+ ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
+ ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+}
+
+/* deinitialization */
+static void ene_hw_deinit(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+
+ /* disable samplers */
+ ene_enable_normal_recieve(dev, 0);
+
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_recieve(dev, 0);
+
+ /* disable hardware IRQ and firmware flag */
+ ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ ene_set_idle(dev, 1);
+ dev->in_use = 0;
+}
+
+/* sends current sample to userspace */
+static void send_sample(struct ene_device *dev)
+{
+ int value = abs(dev->sample) & PULSE_MASK;
+
+ if (dev->sample > 0)
+ value |= PULSE_BIT;
+
+ if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
+ lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
+ wake_up(&dev->lirc_driver->rbuf->wait_poll);
+ }
+ dev->sample = 0;
+}
+
+/* this updates current sample */
+static void update_sample(struct ene_device *dev, int sample)
+{
+ if (!dev->sample)
+ dev->sample = sample;
+ else if (same_sign(dev->sample, sample))
+ dev->sample += sample;
+ else {
+ send_sample(dev);
+ dev->sample = sample;
+ }
+}
+
+/* enable or disable idle mode */
+static void ene_set_idle(struct ene_device *dev, int idle)
+{
+ struct timeval now;
+ int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+ disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+ ENE_CIR_SAMPLE_OVERFLOW);
+ dev->idle = idle;
+
+ /* remember when we have entered the idle mode */
+ if (idle) {
+ do_gettimeofday(&dev->gap_start);
+ return;
+ }
+
+ /* send the gap between keypresses now */
+ do_gettimeofday(&now);
+
+ if (now.tv_sec - dev->gap_start.tv_sec > 16)
+ dev->sample = space(PULSE_MASK);
+ else
+ dev->sample = dev->sample +
+ space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
+ + space(now.tv_usec - dev->gap_start.tv_usec);
+
+ if (abs(dev->sample) > PULSE_MASK)
+ dev->sample = space(PULSE_MASK);
+ send_sample(dev);
+}
+
+/* interrupt handler */
+static irqreturn_t ene_hw_irq(int irq, void *data)
+{
+ u16 hw_value;
+ int i, hw_sample;
+ int space;
+ int buffer_pointer;
+ int irq_status;
+
+ struct ene_device *dev = (struct ene_device *)data;
+ irq_status = ene_hw_irq_status(dev, &buffer_pointer);
+
+ if (!irq_status)
+ return IRQ_NONE;
+
+ /* TODO: only RX for now */
+ if (irq_status == ENE_IRQ_TX)
+ return IRQ_HANDLED;
+
+ for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+
+ hw_value = ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER + buffer_pointer + i);
+
+ if (dev->fan_input_inuse) {
+ /* read high part of the sample */
+ hw_value |= ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
+
+ /* test for _space_ bit */
+ space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
+
+ /* clear space bit, and other unused bits */
+ hw_value &= ENE_FAN_VALUE_MASK;
+ hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+ } else {
+ space = hw_value & ENE_SAMPLE_SPC_MASK;
+ hw_value &= ENE_SAMPLE_VALUE_MASK;
+ hw_sample = hw_value * sample_period;
+ }
+
+ /* no more data */
+ if (!(hw_value))
+ break;
+
+ if (space)
+ hw_sample *= -1;
+
+ /* overflow sample recieved, handle it */
+
+ if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
+
+ if (dev->idle)
+ continue;
+
+ if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
+ update_sample(dev, hw_sample);
+ else
+ ene_set_idle(dev, 1);
+
+ continue;
+ }
+
+ /* normal first sample recieved */
+ if (!dev->fan_input_inuse && dev->idle) {
+ ene_set_idle(dev, 0);
+
+ /* discard first recieved value, its random
+ since its the time signal was off before
+ first pulse if idle mode is enabled, HW
+ does that for us */
+
+ if (!enable_idle)
+ continue;
+ }
+ update_sample(dev, hw_sample);
+ send_sample(dev);
+ }
+ return IRQ_HANDLED;
+}
+
+static int ene_probe(struct pnp_dev *pnp_dev,
+ const struct pnp_device_id *dev_id)
+{
+ struct ene_device *dev;
+ struct lirc_driver *lirc_driver;
+ int error = -ENOMEM;
+
+ dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+ if (!dev)
+ goto err1;
+
+ dev->pnp_dev = pnp_dev;
+ pnp_set_drvdata(pnp_dev, dev);
+
+
+ /* prepare lirc interface */
+ error = -ENOMEM;
+ lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+
+ if (!lirc_driver)
+ goto err2;
+
+ dev->lirc_driver = lirc_driver;
+
+ strcpy(lirc_driver->name, ENE_DRIVER_NAME);
+ lirc_driver->minor = -1;
+ lirc_driver->code_length = sizeof(int) * 8;
+ lirc_driver->features = LIRC_CAN_REC_MODE2;
+ lirc_driver->data = dev;
+ lirc_driver->set_use_inc = ene_hw_init;
+ lirc_driver->set_use_dec = ene_hw_deinit;
+ lirc_driver->dev = &pnp_dev->dev;
+ lirc_driver->owner = THIS_MODULE;
+
+ lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+
+ if (!lirc_driver->rbuf)
+ goto err3;
+
+ if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
+ goto err4;
+
+ error = -ENODEV;
+ if (lirc_register_driver(lirc_driver))
+ goto err5;
+
+ /* validate resources */
+ if (!pnp_port_valid(pnp_dev, 0) ||
+ pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+ goto err6;
+
+ if (!pnp_irq_valid(pnp_dev, 0))
+ goto err6;
+
+ dev->hw_io = pnp_port_start(pnp_dev, 0);
+ dev->irq = pnp_irq(pnp_dev, 0);
+
+ /* claim the resources */
+ error = -EBUSY;
+ if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+ goto err6;
+
+ if (request_irq(dev->irq, ene_hw_irq,
+ IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+ goto err7;
+
+ /* detect hardware version and features */
+ error = ene_hw_detect(dev);
+ if (error)
+ goto err8;
+
+ ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+ return 0;
+
+err8:
+ free_irq(dev->irq, dev);
+err7:
+ release_region(dev->hw_io, ENE_MAX_IO);
+err6:
+ lirc_unregister_driver(lirc_driver->minor);
+err5:
+ lirc_buffer_free(lirc_driver->rbuf);
+err4:
+ kfree(lirc_driver->rbuf);
+err3:
+ kfree(lirc_driver);
+err2:
+ kfree(dev);
+err1:
+ return error;
+}
+
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_hw_deinit(dev);
+ free_irq(dev->irq, dev);
+ release_region(dev->hw_io, ENE_MAX_IO);
+ lirc_unregister_driver(dev->lirc_driver->minor);
+ lirc_buffer_free(dev->lirc_driver->rbuf);
+ kfree(dev->lirc_driver);
+ kfree(dev);
+}
+
+#ifdef CONFIG_PM
+
+/* TODO: make 'wake on IR' configurable and add .shutdown */
+/* currently impossible due to lack of kernel support */
+
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
+ return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ if (dev->in_use)
+ ene_hw_init(dev);
+
+ ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
+ return 0;
+}
+
+#endif
+
+static const struct pnp_device_id ene_ids[] = {
+ {.id = "ENE0100",},
+ {},
+};
+
+static struct pnp_driver ene_driver = {
+ .name = ENE_DRIVER_NAME,
+ .id_table = ene_ids,
+ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+ .probe = ene_probe,
+ .remove = __devexit_p(ene_remove),
+
+#ifdef CONFIG_PM
+ .suspend = ene_suspend,
+ .resume = ene_resume,
+#endif
+};
+
+static int __init ene_init(void)
+{
+ if (sample_period < 5) {
+ ene_printk(KERN_ERR, "sample period must be at\n");
+ ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
+ return -EINVAL;
+ }
+ return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+ pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+ "Enables turning off signal sampling after long inactivity time; "
+ "if disabled might help detecting input signal (default: enabled)");
+
+module_param(enable_learning, bool, S_IRUGO);
+MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+ ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/lirc/lirc_ene0100.h
new file mode 100644
index 0000000..825045d
--- /dev/null
+++ b/drivers/staging/lirc/lirc_ene0100.h
@@ -0,0 +1,169 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
+ *
+ * Copyright (C) 2009 Maxim Levitsky <maximlevitsky(a)gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+/* hardware address */
+#define ENE_STATUS 0 /* hardware status - unused */
+#define ENE_ADDR_HI 1 /* hi byte of register address */
+#define ENE_ADDR_LO 2 /* low byte of register address */
+#define ENE_IO 3 /* read/write window */
+#define ENE_MAX_IO 4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK (1 << 7) /* sample is space */
+#define ENE_SAMPLE_VALUE_MASK 0x7F
+#define ENE_SAMPLE_OVERFLOW 0x7F
+#define ENE_SAMPLES_SIZE 4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */
+ /* each sample of normal buffer */
+
+#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */
+ /* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1 0xF8F8
+#define ENE_FW1_ENABLE (1 << 0) /* enable fw processing */
+#define ENE_FW1_TXIRQ (1 << 1) /* TX interrupt pending */
+#define ENE_FW1_WAKE (1 << 6) /* enable wake from S3 */
+#define ENE_FW1_IRQ (1 << 7) /* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2 0xF8F9
+#define ENE_FW2_BUF_HIGH (1 << 0) /* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR (1 << 2) /* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN (1 << 4) /* normal input is used as */
+ /* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN (1 << 6) /* fan is used as normal input */
+#define ENE_FW2_LEARNING (1 << 7) /* hardware supports learning and TX */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN 0xCD
+#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN 0x03
+#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ 0xFD09 /* IRQ number */
+#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
+#define ENEB_IRQ_STATUS_IR (1 << 5) /* IR irq */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ 0xFE9B /* new irq settings register */
+#define ENEC_IRQ_MASK 0x0F /* irq number mask */
+#define ENEC_IRQ_UNK_EN (1 << 4) /* always enabled */
+#define ENEC_IRQ_STATUS (1 << 5) /* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1 0xFEC0
+#define ENE_CIR_CONF1_ADC_ON 0x7 /* reciever on gpio40 enabled */
+#define ENE_CIR_CONF1_LEARN1 (1 << 3) /* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR (1 << 7) /* send TX carrier or not */
+
+#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2 (1 << 4) /* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS (1 << 5) /* disable normal input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW (1 << 7) /* interrupt on overflows if set */
+
+
+/* transmitter - not implemented yet */
+/* KB3926C and higher */
+/* transmission is very similiar to recieving, a byte is written to */
+/* ENE_TX_INPUT, in same manner as it is read from sample buffer */
+/* sample period is fixed*/
+
+
+/* transmitter ports */
+#define ENE_TX_PORT1 0xFC01 /* this enables one or both */
+#define ENE_TX_PORT1_EN (1 << 5) /* TX ports */
+#define ENE_TX_PORT2 0xFC08
+#define ENE_TX_PORT2_EN (1 << 1)
+
+#define ENE_TX_INPUT 0xFEC9 /* next byte to transmit */
+#define ENE_TX_SPC_MASK (1 << 7) /* Transmitted sample is space */
+#define ENE_TX_UNK1 0xFECB /* set to 0x63 */
+#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period */
+
+
+#define ENE_TX_CARRIER 0xFECE /* TX carrier * 2 (khz) */
+#define ENE_TX_CARRIER_UNKBIT 0x80 /* This bit set on transmit */
+#define ENE_TX_CARRIER_LOW 0xFECF /* TX carrier / 2 */
+
+/* Hardware versions */
+#define ENE_HW_VERSION 0xFF00 /* hardware revision */
+#define ENE_HW_UNK 0xFF1D
+#define ENE_HW_UNK_CLR (1 << 2)
+#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */
+#define ENE_HW_VER_MINOR 0xFF1F
+#define ENE_HW_VER_OLD 0xFD00
+
+#define same_sign(a, b) ((((a) > 0) && (b) > 0) || ((a) < 0 && (b) < 0))
+
+#define ENE_DRIVER_NAME "enecir"
+#define ENE_MAXGAP 250000 /* this is amount of time we wait
+ before turning the sampler, chosen
+ arbitry */
+
+#define space(len) (-(len)) /* add a space */
+
+/* software defines */
+#define ENE_IRQ_RX 1
+#define ENE_IRQ_TX 2
+
+#define ENE_HW_B 1 /* 3926B */
+#define ENE_HW_C 2 /* 3926C */
+#define ENE_HW_D 3 /* 3926D */
+
+#define ene_printk(level, text, ...) \
+ printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+struct ene_device {
+ struct pnp_dev *pnp_dev;
+ struct lirc_driver *lirc_driver;
+
+ /* hw settings */
+ unsigned long hw_io;
+ int irq;
+
+ int hw_revision; /* hardware revision */
+ int hw_learning_and_tx_capable; /* learning capable */
+ int hw_gpio40_learning; /* gpio40 is learning */
+ int hw_fan_as_normal_input; /* fan input is used as regular input */
+
+ /* device data */
+ int idle;
+ int fan_input_inuse;
+
+ int sample;
+ int in_use;
+
+ struct timeval gap_start;
+};
--
1.7.1.1

--
Jarod Wilson
jarod(a)redhat.com

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH 0/15] STAGING: add lirc device drivers
Next: [PATCH 03/15] staging/lirc: add lirc_i2c driver