Prev: [PATCH 01/15] staging/lirc: add lirc_bt829 driver
Next: [PATCH 15/15] staging/lirc: wire up Kconfig and Makefile bits
From: Jarod Wilson on 26 Jul 2010 19:30
Signed-off-by: Jarod Wilson <jarod(a)redhat.com>
---
drivers/staging/lirc/lirc_igorplugusb.c | 555 +++++++++++++++++++++++++++++++
1 files changed, 555 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/lirc/lirc_igorplugusb.c

diff --git a/drivers/staging/lirc/lirc_igorplugusb.c b/drivers/staging/lirc/lirc_igorplugusb.c
new file mode 100644
index 0000000..bce600e
--- /dev/null
+++ b/drivers/staging/lirc/lirc_igorplugusb.c
@@ -0,0 +1,555 @@
+/*
+ * lirc_igorplugusb - USB remote support for LIRC
+ *
+ * Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware.
+ * See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm
+ *
+ * The device can only record bursts of up to 36 pulses/spaces.
+ * Works fine with RC5. Longer commands lead to device buffer overrun.
+ * (Maybe a better firmware or a microcontroller with more ram can help?)
+ *
+ * Version 0.1 [beta status]
+ *
+ * Copyright (C) 2004 Jan M. Hochstein
+ * <hochstein(a)algo.informatik.tu-darmstadt.de>
+ *
+ * This driver was derived from:
+ * Paul Miller <pmiller9(a)users.sourceforge.net>
+ * "lirc_atiusb" module
+ * Vladimir Dergachev <volodya(a)minspring.com>'s 2002
+ * "USB ATI Remote support" (input device)
+ * Adrian Dewhurst <sailor-lk(a)sailorfrag.net>'s 2002
+ * "USB StreamZap remote driver" (LIRC)
+ * Artur Lipowski <alipowski(a)kki.net.pl>'s 2002
+ * "lirc_dev" and "lirc_gpio" LIRC modules
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/usb.h>
+#include <linux/time.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+
+/* module identification */
+#define DRIVER_VERSION "0.1"
+#define DRIVER_AUTHOR \
+ "Jan M. Hochstein <hochstein(a)algo.informatik.tu-darmstadt.de>"
+#define DRIVER_DESC "USB remote driver for LIRC"
+#define DRIVER_NAME "lirc_igorplugusb"
+
+/* debugging support */
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+#define dprintk(fmt, args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG fmt, ## args); \
+ } while (0)
+
+/* One mode2 pulse/space has 4 bytes. */
+#define CODE_LENGTH sizeof(int)
+
+/* Igor's firmware cannot record bursts longer than 36. */
+#define DEVICE_BUFLEN 36
+
+/*
+ * Header at the beginning of the device's buffer:
+ * unsigned char data_length
+ * unsigned char data_start (!=0 means ring-buffer overrun)
+ * unsigned char counter (incremented by each burst)
+ */
+#define DEVICE_HEADERLEN 3
+
+/* This is for the gap */
+#define ADDITIONAL_LIRC_BYTES 2
+
+/* times to poll per second */
+#define SAMPLE_RATE 100
+static int sample_rate = SAMPLE_RATE;
+
+
+/**** Igor's USB Request Codes */
+
+#define SET_INFRABUFFER_EMPTY 1
+/**
+ * Params: none
+ * Answer: empty
+ */
+
+#define GET_INFRACODE 2
+/**
+ * Params:
+ * wValue: offset to begin reading infra buffer
+ *
+ * Answer: infra data
+ */
+
+#define SET_DATAPORT_DIRECTION 3
+/**
+ * Params:
+ * wValue: (byte) 1 bit for each data port pin (0=in, 1=out)
+ *
+ * Answer: empty
+ */
+
+#define GET_DATAPORT_DIRECTION 4
+/**
+ * Params: none
+ *
+ * Answer: (byte) 1 bit for each data port pin (0=in, 1=out)
+ */
+
+#define SET_OUT_DATAPORT 5
+/**
+ * Params:
+ * wValue: byte to write to output data port
+ *
+ * Answer: empty
+ */
+
+#define GET_OUT_DATAPORT 6
+/**
+ * Params: none
+ *
+ * Answer: least significant 3 bits read from output data port
+ */
+
+#define GET_IN_DATAPORT 7
+/**
+ * Params: none
+ *
+ * Answer: least significant 3 bits read from input data port
+ */
+
+#define READ_EEPROM 8
+/**
+ * Params:
+ * wValue: offset to begin reading EEPROM
+ *
+ * Answer: EEPROM bytes
+ */
+
+#define WRITE_EEPROM 9
+/**
+ * Params:
+ * wValue: offset to EEPROM byte
+ * wIndex: byte to write
+ *
+ * Answer: empty
+ */
+
+#define SEND_RS232 10
+/**
+ * Params:
+ * wValue: byte to send
+ *
+ * Answer: empty
+ */
+
+#define RECV_RS232 11
+/**
+ * Params: none
+ *
+ * Answer: byte received
+ */
+
+#define SET_RS232_BAUD 12
+/**
+ * Params:
+ * wValue: byte to write to UART bit rate register (UBRR)
+ *
+ * Answer: empty
+ */
+
+#define GET_RS232_BAUD 13
+/**
+ * Params: none
+ *
+ * Answer: byte read from UART bit rate register (UBRR)
+ */
+
+
+/* data structure for each usb remote */
+struct igorplug {
+
+ /* usb */
+ struct usb_device *usbdev;
+ struct urb *urb_in;
+ int devnum;
+
+ unsigned char *buf_in;
+ unsigned int len_in;
+ int in_space;
+ struct timeval last_time;
+
+ dma_addr_t dma_in;
+
+ /* lirc */
+ struct lirc_driver *d;
+
+ /* handle sending (init strings) */
+ int send_flags;
+ wait_queue_head_t wait_out;
+};
+
+static int unregister_from_lirc(struct igorplug *ir)
+{
+ struct lirc_driver *d = ir->d;
+ int devnum;
+
+ if (!ir->d)
+ return -EINVAL;
+
+ devnum = ir->devnum;
+ dprintk(DRIVER_NAME "[%d]: unregister from lirc called\n", devnum);
+
+ lirc_unregister_driver(d->minor);
+
+ printk(DRIVER_NAME "[%d]: usb remote disconnected\n", devnum);
+
+ kfree(d);
+ ir->d = NULL;
+ kfree(ir);
+ return 0;
+}
+
+static int set_use_inc(void *data)
+{
+ struct igorplug *ir = data;
+
+ if (!ir) {
+ printk(DRIVER_NAME "[?]: set_use_inc called with no context\n");
+ return -EIO;
+ }
+ dprintk(DRIVER_NAME "[%d]: set use inc\n", ir->devnum);
+
+ if (!ir->usbdev)
+ return -ENODEV;
+
+ return 0;
+}
+
+static void set_use_dec(void *data)
+{
+ struct igorplug *ir = data;
+
+ if (!ir) {
+ printk(DRIVER_NAME "[?]: set_use_dec called with no context\n");
+ return;
+ }
+ dprintk(DRIVER_NAME "[%d]: set use dec\n", ir->devnum);
+}
+
+
+/**
+ * Called in user context.
+ * return 0 if data was added to the buffer and
+ * -ENODATA if none was available. This should add some number of bits
+ * evenly divisible by code_length to the buffer
+ */
+static int usb_remote_poll(void *data, struct lirc_buffer *buf)
+{
+ int ret;
+ struct igorplug *ir = (struct igorplug *)data;
+
+ if (!ir->usbdev) /* Has the device been removed? */
+ return -ENODEV;
+
+ memset(ir->buf_in, 0, ir->len_in);
+
+ ret = usb_control_msg(
+ ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ GET_INFRACODE, USB_TYPE_VENDOR|USB_DIR_IN,
+ 0/* offset */, /*unused*/0,
+ ir->buf_in, ir->len_in,
+ /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+ if (ret > 0) {
+ int i = DEVICE_HEADERLEN;
+ int code, timediff;
+ struct timeval now;
+
+ if (ret <= 1) /* ACK packet has 1 byte --> ignore */
+ return -ENODATA;
+
+ dprintk(DRIVER_NAME ": Got %d bytes. Header: %02x %02x %02x\n",
+ ret, ir->buf_in[0], ir->buf_in[1], ir->buf_in[2]);
+
+ if (ir->buf_in[2] != 0) {
+ printk(DRIVER_NAME "[%d]: Device buffer overrun.\n",
+ ir->devnum);
+ /* start at earliest byte */
+ i = DEVICE_HEADERLEN + ir->buf_in[2];
+ /* where are we now? space, gap or pulse? */
+ }
+
+ do_gettimeofday(&now);
+ timediff = now.tv_sec - ir->last_time.tv_sec;
+ if (timediff + 1 > PULSE_MASK / 1000000)
+ timediff = PULSE_MASK;
+ else {
+ timediff *= 1000000;
+ timediff += now.tv_usec - ir->last_time.tv_usec;
+ }
+ ir->last_time.tv_sec = now.tv_sec;
+ ir->last_time.tv_usec = now.tv_usec;
+
+ /* create leading gap */
+ code = timediff;
+ lirc_buffer_write(buf, (unsigned char *)&code);
+ ir->in_space = 1; /* next comes a pulse */
+
+ /* MODE2: pulse/space (PULSE_BIT) in 1us units */
+
+ while (i < ret) {
+ /* 1 Igor-tick = 85.333333 us */
+ code = (unsigned int)ir->buf_in[i] * 85
+ + (unsigned int)ir->buf_in[i] / 3;
+ if (ir->in_space)
+ code |= PULSE_BIT;
+ lirc_buffer_write(buf, (unsigned char *)&code);
+ /* 1 chunk = CODE_LENGTH bytes */
+ ir->in_space ^= 1;
+ ++i;
+ }
+
+ ret = usb_control_msg(
+ ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
+ /*unused*/0, /*unused*/0,
+ /*dummy*/ir->buf_in, /*dummy*/ir->len_in,
+ /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+ if (ret < 0)
+ printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: "
+ "error %d\n", ir->devnum, ret);
+ return 0;
+ } else if (ret < 0)
+ printk(DRIVER_NAME "[%d]: GET_INFRACODE: error %d\n",
+ ir->devnum, ret);
+
+ return -ENODATA;
+}
+
+
+
+static int usb_remote_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = NULL;
+ struct usb_host_interface *idesc = NULL;
+ struct usb_host_endpoint *ep_ctl2;
+ struct igorplug *ir = NULL;
+ struct lirc_driver *driver = NULL;
+ int devnum, pipe, maxp;
+ int minor = 0;
+ char buf[63], name[128] = "";
+ int mem_failure = 0;
+ int ret;
+
+ dprintk(DRIVER_NAME ": usb probe called.\n");
+
+ dev = interface_to_usbdev(intf);
+
+ idesc = intf->cur_altsetting;
+
+ if (idesc->desc.bNumEndpoints != 1)
+ return -ENODEV;
+ ep_ctl2 = idesc->endpoint;
+ if (((ep_ctl2->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ != USB_DIR_IN)
+ || (ep_ctl2->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ != USB_ENDPOINT_XFER_CONTROL)
+ return -ENODEV;
+ pipe = usb_rcvctrlpipe(dev, ep_ctl2->desc.bEndpointAddress);
+ devnum = dev->devnum;
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ dprintk(DRIVER_NAME "[%d]: bytes_in_key=%lu maxp=%d\n",
+ devnum, CODE_LENGTH, maxp);
+
+
+ mem_failure = 0;
+ ir = kzalloc(sizeof(struct igorplug), GFP_KERNEL);
+ if (!ir) {
+ mem_failure = 1;
+ goto mem_failure_switch;
+ }
+ driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+ if (!driver) {
+ mem_failure = 2;
+ goto mem_failure_switch;
+ }
+
+ ir->buf_in = usb_alloc_coherent(dev,
+ DEVICE_BUFLEN+DEVICE_HEADERLEN,
+ GFP_ATOMIC, &ir->dma_in);
+ if (!ir->buf_in) {
+ mem_failure = 3;
+ goto mem_failure_switch;
+ }
+
+ strcpy(driver->name, DRIVER_NAME " ");
+ driver->minor = -1;
+ driver->code_length = CODE_LENGTH * 8; /* in bits */
+ driver->features = LIRC_CAN_REC_MODE2;
+ driver->data = ir;
+ driver->chunk_size = CODE_LENGTH;
+ driver->buffer_size = DEVICE_BUFLEN + ADDITIONAL_LIRC_BYTES;
+ driver->set_use_inc = &set_use_inc;
+ driver->set_use_dec = &set_use_dec;
+ driver->sample_rate = sample_rate; /* per second */
+ driver->add_to_buf = &usb_remote_poll;
+ driver->dev = &intf->dev;
+ driver->owner = THIS_MODULE;
+
+ init_waitqueue_head(&ir->wait_out);
+
+ minor = lirc_register_driver(driver);
+ if (minor < 0)
+ mem_failure = 9;
+
+mem_failure_switch:
+
+ switch (mem_failure) {
+ case 9:
+ usb_free_coherent(dev, DEVICE_BUFLEN+DEVICE_HEADERLEN,
+ ir->buf_in, ir->dma_in);
+ case 3:
+ kfree(driver);
+ case 2:
+ kfree(ir);
+ case 1:
+ printk(DRIVER_NAME "[%d]: out of memory (code=%d)\n",
+ devnum, mem_failure);
+ return -ENOMEM;
+ }
+
+ driver->minor = minor;
+ ir->d = driver;
+ ir->devnum = devnum;
+ ir->usbdev = dev;
+ ir->len_in = DEVICE_BUFLEN+DEVICE_HEADERLEN;
+ ir->in_space = 1; /* First mode2 event is a space. */
+ do_gettimeofday(&ir->last_time);
+
+ if (dev->descriptor.iManufacturer
+ && usb_string(dev, dev->descriptor.iManufacturer,
+ buf, sizeof(buf)) > 0)
+ strlcpy(name, buf, sizeof(name));
+ if (dev->descriptor.iProduct
+ && usb_string(dev, dev->descriptor.iProduct, buf, sizeof(buf)) > 0)
+ snprintf(name + strlen(name), sizeof(name) - strlen(name),
+ " %s", buf);
+ printk(DRIVER_NAME "[%d]: %s on usb%d:%d\n", devnum, name,
+ dev->bus->busnum, devnum);
+
+ /* clear device buffer */
+ ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ SET_INFRABUFFER_EMPTY, USB_TYPE_VENDOR|USB_DIR_IN,
+ /*unused*/0, /*unused*/0,
+ /*dummy*/ir->buf_in, /*dummy*/ir->len_in,
+ /*timeout*/HZ * USB_CTRL_GET_TIMEOUT);
+ if (ret < 0)
+ printk(DRIVER_NAME "[%d]: SET_INFRABUFFER_EMPTY: error %d\n",
+ devnum, ret);
+
+ usb_set_intfdata(intf, ir);
+ return 0;
+}
+
+
+static void usb_remote_disconnect(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct igorplug *ir = usb_get_intfdata(intf);
+ usb_set_intfdata(intf, NULL);
+
+ if (!ir || !ir->d)
+ return;
+
+ ir->usbdev = NULL;
+ wake_up_all(&ir->wait_out);
+
+ usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
+
+ unregister_from_lirc(ir);
+}
+
+static struct usb_device_id usb_remote_id_table[] = {
+ /* Igor Plug USB (Atmel's Manufact. ID) */
+ { USB_DEVICE(0x03eb, 0x0002) },
+
+ /* Terminating entry */
+ { }
+};
+
+static struct usb_driver usb_remote_driver = {
+ .name = DRIVER_NAME,
+ .probe = usb_remote_probe,
+ .disconnect = usb_remote_disconnect,
+ .id_table = usb_remote_id_table
+};
+
+static int __init usb_remote_init(void)
+{
+ int i;
+
+ printk(KERN_INFO "\n"
+ DRIVER_NAME ": " DRIVER_DESC " v" DRIVER_VERSION "\n");
+ printk(DRIVER_NAME ": " DRIVER_AUTHOR "\n");
+ dprintk(DRIVER_NAME ": debug mode enabled\n");
+
+ i = usb_register(&usb_remote_driver);
+ if (i < 0) {
+ printk(DRIVER_NAME ": usb register failed, result = %d\n", i);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __exit usb_remote_exit(void)
+{
+ usb_deregister(&usb_remote_driver);
+}
+
+module_init(usb_remote_init);
+module_exit(usb_remote_exit);
+
+#include <linux/vermagic.h>
+MODULE_INFO(vermagic, VERMAGIC_STRING);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, usb_remote_id_table);
+
+module_param(sample_rate, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sample_rate, "Sampling rate in Hz (default: 100)");
+
--
1.7.1.1

--
Jarod Wilson
jarod(a)redhat.com

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH 01/15] staging/lirc: add lirc_bt829 driver
Next: [PATCH 15/15] staging/lirc: wire up Kconfig and Makefile bits