Prev: [PATCH 3/3] hwmon: Update MAINTAINERS for smm665 driver
Next: [PATCH 0/3} hwmon: Driver for SMM665 Six-Channel Active DC Output Controller/Monitor
From: Guenter Roeck on 18 Jun 2010 12:10
Signed-off-by: Guenter Roeck <guenter.roeck(a)ericsson.com>
---
Documentation/hwmon/smm665 | 116 ++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 116 insertions(+), 0 deletions(-)
create mode 100644 Documentation/hwmon/smm665

diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665
new file mode 100644
index 0000000..d8cce5e
--- /dev/null
+++ b/Documentation/hwmon/smm665
@@ -0,0 +1,116 @@
+Kernel driver smm665
+====================
+
+Supported chips:
+ * Summit Microelectronics SMM665, SMM665B
+ Prefix: 'smm665'
+ Addresses scanned: -
+ Datasheet: Publicly available at the Summit Microelectronics website.
+
+Author: Guenter Roeck <guenter.roeck(a)ericsson.com>
+
+
+Description
+-----------
+
+[From datasheet] The SMM665 is an Active DC Output power supply Controller
+that monitors, margins and cascade sequences power. The part monitors six
+power supply channels as well as VDD, 12V input, two general-purpose analog
+inputs and an internal temperature sensor using a 10-bit ADC.
+
+Each monitored channel has its own high and low limits, plus a critical
+limit.
+
+Usage Notes
+-----------
+
+This driver does not probe for SMM665 devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly. When instantiating the device, you have to specify
+its configuration register address.
+
+Example: the following will load the driver for an SMM665 at address 0x57
+on I2C bus #1:
+$ modprobe smm665
+$ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+This driver uses the values in the datasheet to convert ADC register values
+into the values specified in the sysfs-interface document. All attributes are
+read only.
+
+in1_input 12V input voltage (mV)
+in2_input 3.3V (VDD) input voltage (mV)
+in3_input Channel A voltage (mV)
+in4_input Channel B voltage (mV)
+in5_input Channel C voltage (mV)
+in6_input Channel D voltage (mV)
+in7_input Channel E voltage (mV)
+in8_input Channel F voltage (mV)
+in9_input AIN1 voltage (mV)
+in10_input AIN2 voltage (mV)
+
+in1_min 12v input minimum voltage (mV)
+in2_min 3.3V (VDD) input minimum voltage (mV)
+in3_min Channel A minimum voltage (mV)
+in4_min Channel B minimum voltage (mV)
+in5_min Channel C minimum voltage (mV)
+in6_min Channel D minimum voltage (mV)
+in7_min Channel E minimum voltage (mV)
+in8_min Channel F minimum voltage (mV)
+in9_min AIN1 minimum voltage (mV)
+in10_min AIN2 minimum voltage (mV)
+
+in1_min_alarm 12v input undervoltage alarm
+in2_min_alarm 3.3V (VDD) input undervoltage alarm
+in3_min_alarm Channel A undervoltage alarm
+in4_min_alarm Channel B undervoltage alarm
+in5_min_alarm Channel C undervoltage alarm
+in6_min_alarm Channel D undervoltage alarm
+in7_min_alarm Channel E undervoltage alarm
+in8_min_alarm Channel F undervoltage alarm
+in9_min_alarm AIN1 undervoltage alarm
+in10_min_alarm AIN2 undervoltage alarm
+
+in1_max 12v input maximum voltage (mV)
+in2_max 3.3V (VDD) input maximum voltage (mV)
+in3_max Channel A maximum voltage (mV)
+in4_max Channel B maximum voltage (mV)
+in5_max Channel C maximum voltage (mV)
+in6_max Channel D maximum voltage (mV)
+in7_max Channel E maximum voltage (mV)
+in8_max Channel F maximum voltage (mV)
+in9_max AIN1 maximum voltage (mV)
+in10_max AIN2 maximum voltage (mV)
+
+in1_max_alarm 12v input overvoltage alarm
+in2_max_alarm 3.3V (VDD) input overvoltage alarm
+in3_max_alarm Channel A overvoltage alarm
+in4_max_alarm Channel B overvoltage alarm
+in5_max_alarm Channel C overvoltage alarm
+in6_max_alarm Channel D overvoltage alarm
+in7_max_alarm Channel E overvoltage alarm
+in8_max_alarm Channel F overvoltage alarm
+in9_max_alarm AIN1 overvoltage alarm
+in10_max_alarm AIN2 overvoltage alarm
+
+in1_fault 12v input fault
+in2_fault 3.3V (VDD) input fault
+in3_fault Channel A fault
+in4_fault Channel B fault
+in5_fault Channel C fault
+in6_fault Channel D fault
+in7_fault Channel E fault
+in8_fault Channel F fault
+in9_fault AIN1 fault
+in10_fault AIN2 fault
+
+temp1_input Chip tempererature
+temp1_min Mimimum chip tempererature
+temp1_max Maximum chip tempererature
+temp1_crit Critical chip tempererature
+temp1_min_alarm Chip temperature low alarm
+temp1_max_alarm Chip temperature high alarm
--
1.7.0.87.g0901d

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH 3/3] hwmon: Update MAINTAINERS for smm665 driver
Next: [PATCH 0/3} hwmon: Driver for SMM665 Six-Channel Active DC Output Controller/Monitor