From: Luotao Fu on
This one adds a driver for STMPE811 4-wire resistive touchscreen
controller. STMPE811 is a multifunction device. Hence this driver
depends on stmpe811_core driver for core functionalities.

Signed-off-by: Luotao Fu <l.fu(a)pengutronix.de>
---
drivers/input/touchscreen/Kconfig | 10 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/stmpe811_ts.c | 403 +++++++++++++++++++++++++++++++
3 files changed, 414 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/touchscreen/stmpe811_ts.c

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 3b9d5e2..059b82b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -603,4 +603,14 @@ config TOUCHSCREEN_TPS6507X
To compile this driver as a module, choose M here: the
module will be called tps6507x_ts.

+config TOUCHSCREEN_STMPE811
+ tristate "STMicroelectronics STMPE811 touchscreen"
+ depends on MFD_STMPE811
+ help
+ Say Y here if you want support for STMicroelectronics
+ STMPE811 based touchscreen controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stmpe811_ts.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 497964a..9da8948 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_STMPE811) += stmpe811_ts.o
diff --git a/drivers/input/touchscreen/stmpe811_ts.c b/drivers/input/touchscreen/stmpe811_ts.c
new file mode 100644
index 0000000..3fed0ba
--- /dev/null
+++ b/drivers/input/touchscreen/stmpe811_ts.c
@@ -0,0 +1,403 @@
+/* STMicroelectronics STMPE811 Touchscreen Driver
+ *
+ * (C) 2010 Luotao Fu <l.fu(a)pengutronix.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <linux/mfd/stmpe811.h>
+
+#define STMPE811_TSC_CTRL_OP_MOD_XYZ (0<<1)
+#define STMPE811_TSC_CTRL_OP_MOD_XY (1<<1)
+#define STMPE811_TSC_CTRL_OP_MOD_X (2<<1)
+#define STMPE811_TSC_CTRL_OP_MOD_Y (3<<1)
+#define STMPE811_TSC_CTRL_OP_MOD_Z (4<<1)
+
+#define STMPE811_TSC_CTRL_TSC_STA (1<<7)
+#define STMPE811_TSC_CTRL_TSC_EN (1<<0)
+
+#define STMPE811_TS_NAME "stmpe811-ts"
+#define XY_MASK 0xfff
+
+/*
+ * Module parameters
+ */
+
+/*
+ * Sample time:
+ *
+ * Set sample_time = 0 for 36 clocks
+ * sample_time = 1 for 44 clocks
+ * sample_time = 2 for 56 clocks
+ * sample_time = 3 for 64 clocks
+ * sample_time = 4 for 80 clocks
+ * sample_time = 5 for 96 clocks
+ * sample_time = 6 for 144 clocks
+ * This one defines ADC converstion time in number of clock.
+ */
+static int sample_time = 4;
+module_param(sample_time, int, 0444);
+MODULE_PARM_DESC(sample_time,
+ "Set ADC conversion time. Default is 4 (80 clocks)");
+
+/*
+ * ADC Bit mode:
+ *
+ * Set mod_12b = 0 for 10bit ADC
+ * mod_12b = 1 for 12bit ADC
+ */
+static int mod_12b = 1;
+module_param(mod_12b, int, 0444);
+MODULE_PARM_DESC(mod_12b, "Set ADC Bit mode. Default is 1 (12bit)");
+
+/*
+ * reference source:
+ *
+ * Set ref_sel = 0 for internal reference
+ * ref_sel = 1 for external reference
+ */
+static int ref_sel;
+module_param(ref_sel, int, 0444);
+MODULE_PARM_DESC(ref_sel,
+ "Set ADC reference source. Default is 0 (internal reference)");
+
+/*
+ * ADC Clock speed:
+ *
+ * Set adc_freq = 0 for 1.625 MHz
+ * adc_freq = 1 for 3.25 MHz
+ * adc_freq = 2 | adc_freq = 3 for 6.5 MHz
+ */
+static int adc_freq = 1;
+module_param(adc_freq, int, 0444);
+MODULE_PARM_DESC(adc_freq, "Set ADC clock speed. Default is 1 (3.25MHz)");
+
+/*
+ * Sample average control:
+ *
+ * Set ave_ctrl = 0 for 1 sample
+ * ave_ctrl = 1 for 2 samples
+ * ave_ctrl = 2 for 4 samples
+ * ave_ctrl = 3 for 8 samples
+ */
+static int ave_ctrl = 3;
+module_param(ave_ctrl, int, 0444);
+MODULE_PARM_DESC(adc_freq,
+ "Set average sample counts. Default is 3 (8 samples)");
+
+/*
+ * Touch detect interrupt delay:
+ *
+ * Set touch_det_delay = 0 for 10 us
+ * touch_det_delay = 1 for 50 us
+ * touch_det_delay = 2 for 100 us
+ * touch_det_delay = 3 for 500 us
+ * touch_det_delay = 4 for 1 ms
+ * touch_det_delay = 5 for 5 ms
+ * touch_det_delay = 6 for 10 ms
+ * touch_det_delay = 7 for 50 ms
+ * This one defines the delay for signaling a touch detection interrupt after
+ * the actual event
+ */
+static int touch_det_delay = 3;
+module_param(touch_det_delay, int, 0444);
+MODULE_PARM_DESC(touch_det_delay,
+ "Set touch detect delay. Default is 3 (500 us)");
+
+/*
+ * Panel driver settling time
+ *
+ * Set settling = 0 for 10 us
+ * settling = 1 for 100 us
+ * settling = 2 for 500 us
+ * settling = 3 for 1 ms
+ * settling = 4 for 5 ms
+ * settling = 5 for 10 ms
+ * settling = 6 for 50 ms
+ * settling = 7 for 100 ms
+ *
+ * This one defines the delay time the ADC shall give the pannel to settle its
+ * voltage for stable measurement.
+ */
+static int settling = 2;
+module_param(settling, int, 0444);
+MODULE_PARM_DESC(settling,
+ "Set panel driver settling time. Default is 2 (500 us)");
+
+/*
+ * Length of the fractional part in z
+ *
+ * value coding is quite identical with touch_det_delay above, only
+ * fraction_z ([0..7]) = Count of the fractional part
+ *
+ * This one allows to select range and accuracy of the pressure measurement
+ */
+static int fraction_z = 7;
+module_param(fraction_z, int, 0444);
+MODULE_PARM_DESC(fraction_z,
+ "Set fractional part of z. Default is 7 (7 fractional, 1 whole)");
+
+struct stmpe811_touch {
+ struct stmpe811 *stm;
+ struct input_dev *idev;
+ struct delayed_work work;
+};
+
+static void stmpe811_work(struct work_struct *work)
+{
+ u8 int_sta;
+ u32 timeout = 40;
+
+ struct stmpe811_touch *ts =
+ container_of(work, struct stmpe811_touch, work.work);
+
+ stmpe811_reg_read(ts->stm, STMPE811_REG_INT_STA, &int_sta);
+
+ /* touch_det sometimes get desasserted or just get stuck. This appears
+ * to be a silicon bug, We still have to clearify this with the
+ * manufacture. As a workaround We release the key anyway if the
+ * touch_det keeps coming in after 4ms, while the FIFO contains no value
+ * during the whole time. */
+ while ((int_sta & (1 << STMPE811_IRQ_TOUCH_DET)) && (timeout > 0)) {
+ timeout--;
+ stmpe811_reg_read(ts->stm, STMPE811_REG_INT_STA, &int_sta);
+ udelay(100);
+ }
+
+ input_report_abs(ts->idev, ABS_PRESSURE, 0);
+ input_sync(ts->idev);
+}
+
+static irqreturn_t stmpe811_ts_handler(int irq, void *data)
+{
+ u8 data_set[4];
+ int x, y, z;
+ struct stmpe811_touch *ts = data;
+
+ /* Cancel polling for release if we have new value available. */
+ cancel_delayed_work(&ts->work);
+
+ /*
+ * The FIFO sometimes just crashes and stops generating interrupts. This
+ * appears to be a silicon bug. We still have to clearify this with
+ * the manufacture. As a workaround we disable the TSC while we are
+ * collecting data and flush the FIFO after reading
+ */
+ stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_TSC_EN);
+
+ stmpe811_block_read(ts->stm, STMPE811_REG_TSC_DATA_XYZ, 4, data_set);
+
+ x = (data_set[0] << 4) | (data_set[1] >> 4);
+ y = ((data_set[1] & 0xf) << 8) | data_set[2];
+ z = data_set[3];
+
+ input_report_abs(ts->idev, ABS_X, x);
+ input_report_abs(ts->idev, ABS_Y, y);
+ input_report_abs(ts->idev, ABS_PRESSURE, z);
+ input_sync(ts->idev);
+
+ /* flush the FIFO after we have read out our values. */
+ stmpe811_reg_set_bits(ts->stm, STMPE811_REG_FIFO_STA,
+ STMPE811_FIFO_STA_RESET);
+ stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_FIFO_STA,
+ STMPE811_FIFO_STA_RESET);
+
+ /* reenable the tsc */
+ stmpe811_reg_set_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_TSC_EN);
+
+ /* start polling for touch_det to detect release */
+ schedule_delayed_work(&ts->work, HZ / 50);
+
+ return IRQ_HANDLED;
+}
+
+static int stmpe811_ts_open(struct input_dev *dev)
+{
+ struct stmpe811_touch *ts = input_get_drvdata(dev);
+
+ return stmpe811_reg_set_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_TSC_EN);
+}
+
+static void stmpe811_ts_close(struct input_dev *dev)
+{
+ struct stmpe811_touch *ts = input_get_drvdata(dev);
+
+ stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_TSC_EN);
+}
+
+static int __devinit stmpe811_input_probe(struct platform_device *pdev)
+{
+ struct stmpe811_touch *ts;
+ struct input_dev *idev;
+ int ret = 0;
+
+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ goto err_out;
+
+ idev = input_allocate_device();
+ if (!idev)
+ goto err_free_ts;
+
+ platform_set_drvdata(pdev, ts);
+ ts->stm = dev_get_drvdata(pdev->dev.parent);
+ ts->idev = idev;
+
+ INIT_DELAYED_WORK(&ts->work, stmpe811_work);
+
+ stmpe811_register_irq(ts->stm, STMPE811_IRQ_FIFO_TH,
+ stmpe811_ts_handler, ts);
+
+ ret = stmpe811_reg_clear_bits(ts->stm, STMPE811_REG_SYS_CTRL2,
+ (STMPE811_SYS_CTRL2_ADC_OFF |
+ STMPE811_SYS_CTRL2_TSC_OFF));
+ if (ret) {
+ dev_err(&pdev->dev, "Could not enable clock for ADC and TS\n");
+ goto err_free_plat;
+ }
+
+ ret = stmpe811_reg_set_bits(ts->stm, STMPE811_REG_ADC_CTRL1,
+ (sample_time << 4) | (mod_12b << 3) | (ref_sel << 1));
+ if (ret) {
+ dev_err(&pdev->dev, "Could not setup ADC\n");
+ goto err_free_plat;
+ }
+
+ ret = stmpe811_reg_set_bits(ts->stm, STMPE811_REG_ADC_CTRL2, adc_freq);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not setup ADC\n");
+ goto err_free_plat;
+ }
+
+ ret = stmpe811_reg_set_bits(ts->stm, STMPE811_REG_TSC_CFG,
+ (ave_ctrl << 6) | (touch_det_delay << 3) | settling);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not config touch\n");
+ goto err_free_plat;
+ }
+
+ ret = stmpe811_reg_set_bits(ts->stm,
+ STMPE811_REG_TSC_FRACTION_Z, fraction_z);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not config touch\n");
+ goto err_free_plat;
+ }
+
+ /* set FIFO to 1 for single point reading */
+ ret = stmpe811_reg_write(ts->stm, STMPE811_REG_FIFO_TH, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not set FIFO\n");
+ goto err_free_plat;
+ }
+
+ ret = stmpe811_reg_set_bits(ts->stm, STMPE811_REG_TSC_CTRL,
+ STMPE811_TSC_CTRL_OP_MOD_XYZ);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not set mode\n");
+ goto err_free_plat;
+ }
+
+ idev->name = STMPE811_TS_NAME;
+ idev->id.bustype = BUS_I2C;
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ idev->open = stmpe811_ts_open;
+ idev->close = stmpe811_ts_close;
+
+ input_set_drvdata(idev, ts);
+
+ ret = input_register_device(idev);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register input device\n");
+ goto err_free_plat;
+ }
+
+ ts->stm->active_flag |= STMPE811_USE_TS;
+
+ input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0);
+ input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0);
+ input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0);
+
+ return ret;
+
+err_free_plat:
+ platform_set_drvdata(pdev, NULL);
+ input_free_device(idev);
+err_free_ts:
+ kfree(ts);
+err_out:
+ return ret;
+}
+
+static int __devexit stmpe811_ts_remove(struct platform_device *pdev)
+{
+ struct stmpe811_touch *ts = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&ts->work);
+
+ stmpe811_free_irq(ts->stm, STMPE811_IRQ_FIFO_TH);
+ /*disable FIFO TH */
+ stmpe811_reg_write(ts->stm, STMPE811_REG_FIFO_TH, 0);
+
+ stmpe811_reg_set_bits(ts->stm, STMPE811_REG_SYS_CTRL2,
+ (STMPE811_SYS_CTRL2_ADC_OFF |
+ STMPE811_SYS_CTRL2_ADC_OFF));
+
+ ts->stm->active_flag &= ~STMPE811_USE_TS;
+ platform_set_drvdata(pdev, NULL);
+
+ input_unregister_device(ts->idev);
+ input_free_device(ts->idev);
+
+ kfree(ts);
+
+ return 0;
+}
+
+static struct platform_driver stmpe811_input_driver = {
+ .driver = {
+ .name = "stmpe811-ts",
+ },
+ .probe = stmpe811_input_probe,
+ .remove = __devexit_p(stmpe811_ts_remove),
+};
+
+static int __init stmpe811_input_init(void)
+{
+ return platform_driver_register(&stmpe811_input_driver);
+}
+
+module_init(stmpe811_input_init);
+
+static void __exit stmpe811_input_exit(void)
+{
+ platform_driver_unregister(&stmpe811_input_driver);
+}
+
+module_exit(stmpe811_input_exit);
+
+MODULE_AUTHOR("Luotao Fu <l.fu(a)pengutronix.de>");
+MODULE_DESCRIPTION("STMPE811 touchscreen driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" STMPE811_TS_NAME);
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/