From: Andrew O. Shadoura on
This patch adds wrappers for ethtool to get or set wake-on-LAN
setting without re-inserting the kernel module.

Signed-off-by: Andrew O. Shadoura <andrew(a)beldisplaytech.com>
---
Hello.

I've actually tested this patch on a machine with a network
card that's idenfied by lsusb as "3c905C-TX/TX-M", and it seems
to work.

---
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index d75803e..a452dfe 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -2909,6 +2909,36 @@ static void vortex_get_drvinfo(struct net_device *dev,
}
}

+static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ spin_lock_irq(&vp->lock);
+ wol->supported = WAKE_MAGIC;
+
+ wol->wolopts = 0;
+ if (vp->enable_wol)
+ wol->wolopts |= WAKE_MAGIC;
+ spin_unlock_irq(&vp->lock);
+}
+
+static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ if (wol->wolopts & ~WAKE_MAGIC)
+ return -EINVAL;
+
+ spin_lock_irq(&vp->lock);
+ if (wol->wolopts & WAKE_MAGIC)
+ vp->enable_wol = 1;
+ else
+ vp->enable_wol = 0;
+ acpi_set_WOL(dev);
+ spin_unlock_irq(&vp->lock);
+
+ return 0;
+}
+
static const struct ethtool_ops vortex_ethtool_ops = {
.get_drvinfo = vortex_get_drvinfo,
.get_strings = vortex_get_strings,
@@ -2920,6 +2950,8 @@ static const struct ethtool_ops vortex_ethtool_ops = {
.set_settings = vortex_set_settings,
.get_link = ethtool_op_get_link,
.nway_reset = vortex_nway_reset,
+ .get_wol = vortex_get_wol,
+ .set_wol = vortex_set_wol,
};

#ifdef CONFIG_PCI

--
WBR, Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/