Prev: Removing dead RT2800PCI_SOC
Next: [PATCH 2/8] sdhci: Use work structs instead of tasklets
From: Anton Vorontsov on 14 Jul 2010 09:10
We only need atomic context to disable SDHCI interrupts, after that
we can run in a kernel thread.

Note that irq handler still grabs an irqsave spinlock, we'll deal
with it in a subsequent patch.

Signed-off-by: Anton Vorontsov <avorontsov(a)mvista.com>
---
drivers/mmc/host/sdhci.c | 47 +++++++++++++++++++++++++++------------------
1 files changed, 28 insertions(+), 19 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9ec245c..0358b35 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1506,9 +1506,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
}
}

-static irqreturn_t sdhci_irq(int irq, void *dev_id)
+static irqreturn_t sdhci_irq_thread(int irq, void *dev_id)
{
- irqreturn_t result;
struct sdhci_host* host = dev_id;
u32 intmask;
int cardint = 0;
@@ -1516,17 +1515,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
spin_lock(&host->lock);

intmask = sdhci_readl(host, SDHCI_INT_STATUS);
-
- if (!intmask || intmask == 0xffffffff) {
- result = IRQ_NONE;
- goto out;
- }
-
sdhci_writel(host, intmask, SDHCI_INT_STATUS);

- DBG("*** %s got interrupt: 0x%08x\n",
- mmc_hostname(host->mmc), intmask);
-
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE))
schedule_work(&host->card_detect_work);

@@ -1559,10 +1549,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
sdhci_dumpregs(host);
}

- result = IRQ_HANDLED;
-
mmiowb();
-out:
+
spin_unlock(&host->lock);

/*
@@ -1571,7 +1559,28 @@ out:
if (cardint)
mmc_signal_sdio_irq(host->mmc);

- return result;
+ /* Restore interrupts */
+ intmask = sdhci_readl(host, SDHCI_INT_ENABLE);
+ sdhci_writel(host, intmask, SDHCI_SIGNAL_ENABLE);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sdhci_irq(int irq, void *dev_id)
+{
+ struct sdhci_host *host = dev_id;
+ u32 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
+
+ if (!intmask || intmask == 0xffffffff)
+ return IRQ_NONE;
+
+ /* Disable interrupts */
+ sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
+
+ DBG("*** %s got interrupt: 0x%08x\n",
+ mmc_hostname(host->mmc), intmask);
+
+ return IRQ_WAKE_THREAD;
}

/*****************************************************************************\
@@ -1608,8 +1617,8 @@ int sdhci_resume_host(struct sdhci_host *host)
host->ops->enable_dma(host);
}

- ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
- mmc_hostname(host->mmc), host);
+ ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_irq_thread,
+ IRQF_SHARED, mmc_hostname(host->mmc), host);
if (ret)
return ret;

@@ -1868,8 +1877,8 @@ int sdhci_add_host(struct sdhci_host *host)

INIT_DELAYED_WORK(&host->timeout_work, sdhci_timeout_work);

- ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
- mmc_hostname(mmc), host);
+ ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_irq_thread,
+ IRQF_SHARED, mmc_hostname(host->mmc), host);
if (ret)
return ret;

--
1.7.0.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: Removing dead RT2800PCI_SOC
Next: [PATCH 2/8] sdhci: Use work structs instead of tasklets