From: Anton Vorontsov on
Just a cosmetic change, should not affect functionality.

Signed-off-by: Anton Vorontsov <avorontsov(a)mvista.com>
---
drivers/mmc/host/sdhci.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e6adda8..c754df1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/scatterlist.h>
+#include <linux/jiffies.h>

#include <linux/leds.h>

@@ -160,17 +161,16 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
host->clock = 0;

/* Wait max 100 ms */
- timeout = 100;
+ timeout = jiffies + msecs_to_jiffies(100);

/* hw clears the bit when it's done */
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
- if (timeout == 0) {
+ if (time_after(jiffies, timeout)) {
printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
mmc_hostname(host->mmc), (int)mask);
sdhci_dumpregs(host);
return;
}
- timeout--;
msleep(1);
}

@@ -884,7 +884,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
WARN_ON(host->cmd);

/* Wait max 10 ms */
- timeout = 10;
+ timeout = jiffies + msecs_to_jiffies(10);

mask = SDHCI_CMD_INHIBIT;
if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
@@ -896,7 +896,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
mask &= ~SDHCI_DATA_INHIBIT;

while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
- if (timeout == 0) {
+ if (time_after(jiffies, timeout)) {
printk(KERN_ERR "%s: Controller never released "
"inhibit bit(s).\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
@@ -904,7 +904,6 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
schedule_work(&host->finish_work);
return;
}
- timeout--;
mdelay(1);
}

--
1.7.0.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/