[PATCH] Marvell OpenRD-Ultimate machine support
in [Kernel]
|
Prev: [RFC PATCH 1/3] kbuild: Warn on selecting symbols with unmet direct dependencies
Next: [GIT PULL] tracing: removal of ftrace_preempt_disable
From: Dmytro Milinevskyy on 8 Jun 2010 13:30 Hello! This patch adds support for the OpenRD Ultimate machine(could be found at http://www.arm.linux.org.uk/developer/machines/list.php?id=2884) It slightly differs from Client version. Also this patch adds correction for PHY address for Ultimate version. Regards, -- Dmytro Milinevskyy Signed-off-by: Dmytro Milinevskyy <milinevskyy(a)gmail.com> --- arch/arm/mach-kirkwood/Kconfig | 7 ++++++ arch/arm/mach-kirkwood/openrd-setup.c | 34 +++++++++++++++++++++++++++++--- 2 files changed, 37 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 29b2163..110a3b8 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -75,6 +75,13 @@ config MACH_OPENRD_CLIENT Say 'Y' here if you want your kernel to support the Marvell OpenRD Client Board. +config MACH_OPENRD_ULTIMATE + bool "Marvell OpenRD Ultimate Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Ultimate Board. + config MACH_NETSPACE_V2 bool "LaCie Network Space v2 NAS Board" help diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index ad3f1ec..5d6797a 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -47,6 +47,14 @@ static struct mv643xx_eth_platform_data openrd_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(24), }; +static struct mv643xx_eth_platform_data openrd_ultimate_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data openrd_ultimate_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + static struct mv_sata_platform_data openrd_sata_data = { .n_ports = 2, }; @@ -73,9 +81,14 @@ static void __init openrd_init(void) kirkwood_ehci_init(); - kirkwood_ge00_init(&openrd_ge00_data); - if (machine_is_openrd_client()) - kirkwood_ge01_init(&openrd_ge01_data); + if (machine_is_openrd_ultimate()) { + kirkwood_ge00_init(&openrd_ultimate_ge00_data); + kirkwood_ge01_init(&openrd_ultimate_ge01_data); + } else { + kirkwood_ge00_init(&openrd_ge00_data); + if (machine_is_openrd_client()) + kirkwood_ge01_init(&openrd_ge01_data); + } kirkwood_sata_init(&openrd_sata_data); kirkwood_sdio_init(&openrd_mvsdio_data); @@ -84,7 +97,7 @@ static void __init openrd_init(void) static int __init openrd_pci_init(void) { - if (machine_is_openrd_base() || machine_is_openrd_client()) + if (machine_is_openrd_base() || machine_is_openrd_client() || machine_is_openrd_ultimate()) kirkwood_pcie_init(); return 0; @@ -116,3 +129,16 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board") .timer = &kirkwood_timer, MACHINE_END #endif + +#ifdef CONFIG_MACH_OPENRD_ULTIMATE +MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board") + /* Maintainer: Dhaval Vasa <dhaval.vasa(a)einfochips.com> */ + .phys_io = KIRKWOOD_REGS_PHYS_BASE, + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .init_machine = openrd_init, + .map_io = kirkwood_map_io, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, +MACHINE_END +#endif -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |