Prev: [PATCH/RFC 0/4] hwmon: PMBus device driver
Next: [PATCH/RFC 3/4] hwmon: pmbus driver documentation
From: Guenter Roeck on 28 Jun 2010 18:00
Signed-off-by: Guenter Roeck <guenter.roeck(a)ericsson.com>
---
Documentation/hwmon/sysfs-interface | 27 ++++++++++++++++++++++-----
1 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index d4e2917..b183d94 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -421,11 +421,12 @@ power[1-*]_accuracy Accuracy of the power meter.
Unit: Percent
RO

-power[1-*]_alarm 1 if the system is drawing more power than the
- cap allows; 0 otherwise. A poll notification is
- sent to this file when the power use exceeds the
- cap. This file only appears if the cap is known
- to be enforced by hardware.
+power[1-*]_alarm 1 if the system is drawing more power than cap
+ or max allows; 0 otherwise. A poll notification
+ is sent to this file when the power use exceeds
+ the cap or max limit. If only cap is supported,
+ this file only appears if the cap is known to be
+ enforced by hardware.
RO

power[1-*]_cap If power use rises above this limit, the
@@ -450,6 +451,18 @@ power[1-*]_cap_min Minimum cap that can be set.
Unit: microWatt
RO

+power[1-*]_max Maximum power.
+ Unit: microWatt
+ RW
+
+power[1-*]_crit Critical maximum power.
+ If power rises to or above this limit, the
+ system will take drastic action to reduce power
+ consumption, such as a system shutdown. At the
+ very least, a power fault will be generated.
+ Unit: microWatt
+ RO
+
**********
* Energy *
**********
@@ -471,6 +484,7 @@ limit-related alarms, not both. The driver should just reflect the hardware
implementation.

in[0-*]_alarm
+power[1-*]_alarm
fan[1-*]_alarm
temp[1-*]_alarm
Channel alarm
@@ -482,6 +496,8 @@ OR

in[0-*]_min_alarm
in[0-*]_max_alarm
+power[1-*]_min_alarm
+power[1-*]_max_alarm
fan[1-*]_min_alarm
fan[1-*]_max_alarm
temp[1-*]_min_alarm
@@ -498,6 +514,7 @@ supports it. When this boolean has value 1, the measurement for that
channel should not be trusted.

in[0-*]_fault
+power[1-*]_fault
fan[1-*]_fault
temp[1-*]_fault
Input fault condition
--
1.7.0.87.g0901d

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [PATCH/RFC 0/4] hwmon: PMBus device driver
Next: [PATCH/RFC 3/4] hwmon: pmbus driver documentation