From: Joakim Tjernlund on 17 Jun 2010 05:50 The ds1307 driver misreads the ds1388 registers when checking for 12 or 24 hour mode. Instead of checking the hour register it reads the minute register. Therefore the driver thinks minutes >= 40 has the 12HR bit set and resets the minute register by zeroing the high bits. This results in minutes are reset to 0-9, jumping back in time 40 or 50 minutes. The time jump is also written back to the RTC. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund(a)transmode.se> --- This should go to Linus ASAP IMHO. drivers/rtc/rtc-ds1307.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index c4ec5c1..a01bbe2 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -775,7 +775,7 @@ static int __devinit ds1307_probe(struct i2c_client *client, read_rtc: /* read RTC registers */ - tmp = ds1307->read_block_data(ds1307->client, 0, 8, buf); + tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf); if (tmp != 8) { pr_debug("read error %d\n", tmp); err = -EIO; @@ -860,7 +860,7 @@ read_rtc: if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) tmp += 12; i2c_smbus_write_byte_data(client, - DS1307_REG_HOUR, + ds1307->offset + DS1307_REG_HOUR, bin2bcd(tmp)); } -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|
Pages: 1 Prev: [PATCH] kgdb: remove custom hex_to_bin() implementation Next: Congratulations! |