From: Donggeun Kim on
This patch support driver for BOSCH SMB380 and BMA023.

This driver will read x, y, z coordinate registers from the device and
report the values to users through sysfs interface.

Signed-off-by: Donggeun Kim <dg77.kim(a)samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com>
---
drivers/hwmon/Kconfig | 8 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/smb380.c | 572
++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/smb380.h | 20 ++
4 files changed, 601 insertions(+), 0 deletions(-)
create mode 100644 drivers/hwmon/smb380.c
create mode 100644 include/linux/smb380.h

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e19cf8e..f68f47e 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1118,6 +1118,14 @@ config SENSORS_MC13783_ADC
help
Support for the A/D converter on MC13783 PMIC.

+config SENSORS_SMB380
+ tristate "SMB380 Triaxial acceleration sensor"
+ depends on HWMON && I2C
+ help
+ This driver provides support for the Bosch Sensortec Triaxial
+ Acceleration Sensor IC, which provides measurements of acceleration
+ in prependicular axes as well as absolute temperature measurement.
+
if ACPI

comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 2138ceb..a840540 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -103,6 +103,7 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
+obj-$(CONFIG_SENSORS_SMB380) += smb380.o

ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/hwmon/smb380.c b/drivers/hwmon/smb380.c
new file mode 100644
index 0000000..02a77ba
--- /dev/null
+++ b/drivers/hwmon/smb380.c
@@ -0,0 +1,572 @@
+/*
+ * smb380.c - SMB380 Tri-axis accelerometer driver
+ *
+ * Copyright (c) 2009 Samsung Eletronics
+ * Kim Kyuwon <q1.kim(a)samsung.com>
+ * Kyungmin Park <kyungmin.park(a)samsung.com>
+ * Donggeun Kim <dg77.kim(a)samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/smb380.h>
+
+#define SMB380_CHIP_ID_REG 0x00
+#define SMB380_X_LSB_REG 0x02
+#define SMB380_X_MSB_REG 0x03
+#define SMB380_Y_LSB_REG 0x04
+#define SMB380_Y_MSB_REG 0x05
+#define SMB380_Z_LSB_REG 0x06
+#define SMB380_Z_MSB_REG 0x07
+#define SMB380_TEMP_REG 0x08
+#define SMB380_CTRL1_REG 0x0a
+#define SMB380_CTRL2_REG 0x0b
+#define SMB380_SETTINGS1_REG 0x0c
+#define SMB380_SETTINGS2_REG 0x0d
+#define SMB380_SETTINGS3_REG 0x0e
+#define SMB380_SETTINGS4_REG 0x0f
+#define SMB380_SETTINGS5_REG 0x10
+#define SMB380_SETTINGS6_REG 0x11
+#define SMB380_RANGE_BW_REG 0x14
+#define SMB380_CONF2_REG 0x15
+
+#define SMB380_ENABLE_ADV_INT_SHIFT 6
+#define SMB380_ENABLE_ADV_INT_MASK (0x1 << 6)
+#define SMB380_NEW_DATA_INT_SHIFT 5
+#define SMB380_NEW_DATA_INT_MASK (0x1 << 5)
+#define SMB380_LATCH_INT_SHIFT 4
+#define SMB380_LATCH_INT_MASK (0x1 << 4)
+#define SMB380_SHADOW_DIS_SHIFT 3
+#define SMB380_SHADOW_DIS_MASK (0x1 << 3)
+#define SMB380_WAKEUP_PAUSE_SHIFT 1
+#define SMB380_WAKEUP_PAUSE_MASK (0x3 << 1)
+#define SMB380_WAKEUP_SHIFT 0
+#define SMB380_WAKEUP_MASK (0x1)
+
+#define SMB380_RANGE_SHIFT 3
+#define SMB380_RANGE_MASK (0x3 << 3)
+#define SMB380_BANDWIDTH_SHIFT 0
+#define SMB380_BANDWIDTH_MASK (0x7)
+
+#define SMB380_ANY_MOTION_DUR_SHIFT 6
+#define SMB380_ANY_MOTION_DUR_MASK (0x3 << 6)
+#define SMB380_HG_HYST_SHIFT 3
+#define SMB380_HG_HYST_MASK (0x7 << 3)
+#define SMB380_LG_HYST_SHIFT 0
+#define SMB380_LG_HYST_MASK (0x7)
+
+#define SMB380_ANY_MOTION_THRES_MASK (0xff)
+#define SMB380_HG_DUR_MASK (0xff)
+#define SMB380_HG_THRES_MASK (0xff)
+#define SMB380_LG_DUR_MASK (0xff)
+#define SMB380_LG_THRES_MASK (0xff)
+
+#define SMB380_ALERT_SHIFT 7
+#define SMB380_ALERT_MASK (0x1 << 7)
+#define SMB380_ANY_MOTION_SHIFT 6
+#define SMB380_ANY_MOTION_MASK (0x1 << 6)
+#define SMB380_COUNTER_HG_SHIFT 4
+#define SMB380_COUNTER_HG_MASK (0x3 << 4)
+#define SMB380_COUNTER_LG_SHIFT 2
+#define SMB380_COUNTER_LG_MASK (0x3 << 2)
+#define SMB380_ENABLE_HG_SHIFT 1
+#define SMB380_ENABLE_HG_MASK (0x1 << 1)
+#define SMB380_ENABLE_LG_SHIFT 0
+#define SMB380_ENABLE_LG_MASK (0x1)
+
+#define SMB380_RESET_INT_SHIFT 6
+#define SMB380_RESET_INT_MASK (0x1 << 6)
+#define SMB380_SELF_TEST1_SHIFT 3
+#define SMB380_SELF_TEST1_MASK (0x1 << 3)
+#define SMB380_SELF_TEST0_SHIFT 2
+#define SMB380_SELF_TEST0_MASK (0x1 << 2)
+#define SMB380_SOFT_RESET_SHIFT 1
+#define SMB380_SOFT_RESET_MASK (0x1 << 1)
+#define SMB380_SLEEP_SHIFT 0
+#define SMB380_SLEEP_MASK (0x1)
+
+#define SMB380_ST_RESULT_SHIFT 7
+#define SMB380_ST_RESULT_MASK (0x1 << 7)
+#define SMB380_ALERT_PHASE_SHIFT 4
+#define SMB380_ALERT_PHASE_MASK (0x1 << 4)
+#define SMB380_LG_LATCHED_SHIFT 3
+#define SMB380_LG_LATCHED_MASK (0x1 << 3)
+#define SMB380_HG_LATCHED_SHIFT 2
+#define SMB380_HG_LATCHED_MASK (0x1 << 2)
+#define SMB380_STATUS_LG_SHIFT 1
+#define SMB380_STATUS_LG_MASK (0x1 << 1)
+#define SMB380_STATUS_HG_SHIFT 0
+#define SMB380_STATUS_HG_MASK (0x1)
+
+#define SMB380_ACCEL_BITS 10
+
+struct smb380_data {
+ s16 x;
+ s16 y;
+ s16 z;
+ u8 temp;
+};
+
+enum scale_range {
+ RANGE_2G,
+ RANGE_4G,
+ RANGE_8G,
+};
+
+/* Used to setup the digital filtering bandwitdh of ADC output */
+enum filter_bw {
+ BW_25HZ,
+ BW_50HZ,
+ BW_100HZ,
+ BW_190HZ,
+ BW_375HZ,
+ BW_750HZ,
+ BW_1500HZ,
+};
+
+struct smb380_sensor {
+ struct i2c_client *client;
+ struct device *dev;
+ struct work_struct work;
+ struct mutex lock;
+
+ int (*trans_matrix)[3];
+ struct smb380_data data;
+};
+
+static int smb380_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret;
+
+ /*
+ * Accorting to the datasheet, the interrupt should be deactivated
+ * on the microprocessor side when write sequences are operated
+ */
+ disable_irq_nosync(client->irq);
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+ enable_irq(client->irq);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+ __func__, reg, val, ret);
+ return ret;
+}
+
+static int smb380_read_reg(struct i2c_client *client, u8 reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
+ __func__, reg, ret);
+ return ret;
+}
+
+static int smb380_xyz_read_reg(struct i2c_client *client,
+ u8 *buffer, int length)
+{
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = buffer,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = length,
+ .buf = buffer,
+ },
+ };
+ return i2c_transfer(client->adapter, msg, 2);
+}
+
+static int smb380_set_reg_bits(struct i2c_client *client,
+ int val, int shift, u8 mask, u8 reg)
+{
+ u8 data = smb380_read_reg(client, reg);
+
+ data = (data & ~mask) | ((val << shift) & mask);
+ return smb380_write_reg(client, reg, data);
+}
+
+static int smb380_set_range(struct i2c_client *client, enum scale_range
range)
+{
+ return smb380_set_reg_bits(client, range,
+ SMB380_RANGE_SHIFT,
+ SMB380_RANGE_MASK,
+ SMB380_RANGE_BW_REG);
+}
+
+static int smb380_set_bandwidth(struct i2c_client *client, enum
filter_bw bw)
+{
+ return smb380_set_reg_bits(client, bw,
+ SMB380_BANDWIDTH_SHIFT,
+ SMB380_BANDWIDTH_MASK,
+ SMB380_RANGE_BW_REG);
+}
+
+static int smb380_set_new_data_int(struct i2c_client *client, u8 on)
+{
+ return smb380_set_reg_bits(client, on,
+ SMB380_NEW_DATA_INT_SHIFT,
+ SMB380_NEW_DATA_INT_MASK,
+ SMB380_CONF2_REG);
+}
+
+static int smb380_set_HG_int(struct i2c_client *client, u8 on)
+{
+ return smb380_set_reg_bits(client, on,
+ SMB380_ENABLE_HG_SHIFT,
+ SMB380_ENABLE_HG_MASK,
+ SMB380_CTRL2_REG);
+}
+
+static int smb380_set_LG_int(struct i2c_client *client, u8 on)
+{
+ return smb380_set_reg_bits(client, on,
+ SMB380_ENABLE_LG_SHIFT,
+ SMB380_ENABLE_LG_MASK,
+ SMB380_CTRL2_REG);
+}
+
+static int smb380_set_LG_dur(struct i2c_client *client, u8 dur)
+{
+ return smb380_set_reg_bits(client, dur,
+ 0, SMB380_LG_DUR_MASK,
+ SMB380_SETTINGS2_REG);
+}
+
+static int smb380_set_LG_thres(struct i2c_client *client, u8 thres)
+{
+ return smb380_set_reg_bits(client, thres,
+ 0, SMB380_LG_THRES_MASK,
+ SMB380_SETTINGS1_REG);
+}
+
+static int smb380_set_LG_hyst(struct i2c_client *client, u8 hyst)
+{
+ return smb380_set_reg_bits(client, hyst,
+ SMB380_LG_HYST_SHIFT,
+ SMB380_LG_HYST_MASK,
+ SMB380_SETTINGS6_REG);
+}
+
+static int smb380_set_HG_dur(struct i2c_client *client, u8 dur)
+{
+ return smb380_set_reg_bits(client, dur,
+ 0, SMB380_HG_DUR_MASK,
+ SMB380_SETTINGS4_REG);
+}
+
+static int smb380_set_HG_thres(struct i2c_client *client, u8 thres)
+{
+ return smb380_set_reg_bits(client, thres,
+ 0, SMB380_HG_THRES_MASK,
+ SMB380_SETTINGS3_REG);
+}
+
+static int smb380_set_HG_hyst(struct i2c_client *client, u8 hyst)
+{
+ return smb380_set_reg_bits(client, hyst,
+ SMB380_HG_HYST_SHIFT,
+ SMB380_HG_HYST_MASK,
+ SMB380_SETTINGS6_REG);
+}
+
+static int smb380_set_sleep(struct i2c_client *client, u8 on)
+{
+ return smb380_set_reg_bits(client, on,
+ SMB380_SLEEP_SHIFT,
+ SMB380_SLEEP_MASK,
+ SMB380_CTRL1_REG);
+}
+
+/*
+ * The description of the digital signals x, y and z is "2' complement".
+ * So we need to correct the sign of data read by i2c.
+ */
+static inline void smb380_correct_accel_sign(s16 *val)
+{
+ *val <<= (sizeof(s16) * BITS_PER_BYTE - SMB380_ACCEL_BITS);
+ *val >>= (sizeof(s16) * BITS_PER_BYTE - SMB380_ACCEL_BITS);
+}
+
+static void smb380_read_x(struct i2c_client *client, s16 *x,
+ u8 *x_lsb, u8 *x_msb)
+{
+ *x = (*x_msb << 2) | (*x_lsb >> 6);
+ smb380_correct_accel_sign(x);
+}
+
+static void smb380_read_y(struct i2c_client *client, s16 *y,
+ u8 *y_lsb, u8 *y_msb)
+{
+ *y = (*y_msb << 2) | (*y_lsb >> 6);
+ smb380_correct_accel_sign(y);
+}
+
+static void smb380_read_z(struct i2c_client *client, s16 *z,
+ u8 *z_lsb, u8 *z_msb)
+{
+ *z = (*z_msb << 2) | (*z_lsb >> 6);
+ smb380_correct_accel_sign(z);
+}
+
+/*
+ * Read 8 bit temperature.
+ * An output of 0 equals -30C, 1 LSB equals 0.5C
+ */
+static void smb380_read_temperature(struct i2c_client *client, u8 *temper)
+{
+ *temper = smb380_read_reg(client, SMB380_TEMP_REG);
+
+ dev_dbg(&client->dev, "%s: %d\n", __func__, *temper);
+}
+
+static void smb380_read_xyz(struct i2c_client *client,
+ s16 *x, s16 *y, s16 *z)
+{
+ u8 buffer[6];
+ buffer[0] = SMB380_X_LSB_REG;
+ smb380_xyz_read_reg(client, buffer, 6);
+
+ smb380_read_x(client, x, &buffer[0], &buffer[1]);
+ smb380_read_y(client, y, &buffer[2], &buffer[3]);
+ smb380_read_z(client, z, &buffer[4], &buffer[5]);
+
+ dev_dbg(&client->dev, "%s: x %d, y %d, z %d\n", __func__, *x, *y, *z);
+}
+
+static ssize_t smb380_show_xyz(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct smb380_sensor *sensor = dev_get_drvdata(dev);
+ int (*trans_matrix)[3] = sensor->trans_matrix;
+ s16 tmp_x, tmp_y, tmp_z;
+
+ smb380_read_xyz(sensor->client,
+ &sensor->data.x, &sensor->data.y, &sensor->data.z);
+
+ tmp_x = sensor->data.x;
+ tmp_y = sensor->data.y;
+ tmp_z = sensor->data.z;
+
+ sensor->data.x = tmp_x * *(*(trans_matrix)) +
+ tmp_y * *(*(trans_matrix) + 1) +
+ tmp_z * *(*(trans_matrix) + 2);
+ sensor->data.y = tmp_x * *(*(trans_matrix + 1)) +
+ tmp_y * *(*(trans_matrix + 1) + 1) +
+ tmp_z * *(*(trans_matrix + 1) + 2);
+ sensor->data.z = tmp_x * *(*(trans_matrix + 2)) +
+ tmp_y * *(*(trans_matrix + 2) + 1) +
+ tmp_z * *(*(trans_matrix + 2) + 2);
+
+ return sprintf(buf, "%d, %d, %d\n",
+ sensor->data.x, sensor->data.y, sensor->data.z);
+}
+static SENSOR_DEVICE_ATTR(xyz, S_IRUGO, smb380_show_xyz, NULL, 0);
+
+static ssize_t smb380_show_temper(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct smb380_sensor *sensor = dev_get_drvdata(dev);
+ u8 temper;
+
+ smb380_read_temperature(sensor->client, &temper);
+ return sprintf(buf, "%d\n", temper);
+}
+static SENSOR_DEVICE_ATTR(temperature, S_IRUGO, smb380_show_temper,
NULL, 0);
+
+static struct attribute *smb380_attributes[] = {
+ &sensor_dev_attr_xyz.dev_attr.attr,
+ &sensor_dev_attr_temperature.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group smb380_group = {
+ .attrs = smb380_attributes,
+};
+
+static void smb380_work(struct work_struct *work)
+{
+ struct smb380_sensor *sensor =
+ container_of(work, struct smb380_sensor, work);
+
+ smb380_read_xyz(sensor->client,
+ &sensor->data.x, &sensor->data.y, &sensor->data.z);
+ smb380_read_temperature(sensor->client, &sensor->data.temp);
+
+ enable_irq(sensor->client->irq);
+}
+
+static irqreturn_t smb380_irq(int irq, void *dev_id)
+{
+ struct smb380_sensor *sensor = dev_id;
+
+ if (!work_pending(&sensor->work)) {
+ disable_irq_nosync(irq);
+ schedule_work(&sensor->work);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void smb380_initialize(struct smb380_sensor *sensor)
+{
+ smb380_set_range(sensor->client, RANGE_2G);
+ smb380_set_bandwidth(sensor->client, BW_25HZ);
+ smb380_set_new_data_int(sensor->client, 0);
+ smb380_set_HG_dur(sensor->client, 0x96);
+ smb380_set_HG_thres(sensor->client, 0xa0);
+ smb380_set_HG_hyst(sensor->client, 0x0);
+ smb380_set_LG_dur(sensor->client, 0x96);
+ smb380_set_LG_thres(sensor->client, 0x14);
+ smb380_set_LG_hyst(sensor->client, 0x0);
+ smb380_set_HG_int(sensor->client, 1);
+ smb380_set_LG_int(sensor->client, 1);
+}
+
+static int __devinit smb380_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct smb380_sensor *sensor;
+ int ret;
+
+ sensor = kzalloc(sizeof(struct smb380_sensor), GFP_KERNEL);
+ if (!sensor) {
+ dev_err(&client->dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ sensor->client = client;
+ sensor->trans_matrix = ((struct smb380_platform_data *)
+ (client->dev.platform_data))->trans_matrix;
+ i2c_set_clientdata(client, sensor);
+
+ ret = smb380_read_reg(client, SMB380_CHIP_ID_REG);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to detect device\n");
+ goto failed_free;
+ }
+
+ INIT_WORK(&sensor->work, smb380_work);
+ mutex_init(&sensor->lock);
+
+ ret = sysfs_create_group(&client->dev.kobj, &smb380_group);
+ if (ret) {
+ dev_err(&client->dev, "Creating attribute group failed");
+ goto failed_free;
+ }
+
+ sensor->dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(sensor->dev)) {
+ dev_err(&client->dev, "Registering to hwmon device is failed");
+ ret = PTR_ERR(sensor->dev);
+ goto failed_remove_sysfs;
+ }
+
+ if (client->irq > 0) {
+ ret = request_irq(client->irq, smb380_irq, IRQF_TRIGGER_HIGH,
+ "smb380 accelerometer", sensor);
+ if (ret) {
+ dev_err(&client->dev, "can't get IRQ %d, ret %d\n",
+ client->irq, ret);
+ goto failed_unregister_hwmon;
+ }
+ }
+
+ smb380_initialize(sensor);
+
+ dev_info(&client->dev, "%s registered\n", id->name);
+ return 0;
+
+failed_unregister_hwmon:
+ hwmon_device_unregister(sensor->dev);
+failed_remove_sysfs:
+ sysfs_remove_group(&client->dev.kobj, &smb380_group);
+failed_free:
+ i2c_set_clientdata(client, NULL);
+ kfree(sensor);
+ return ret;
+}
+
+static int __devexit smb380_remove(struct i2c_client *client)
+{
+ struct smb380_sensor *sensor = i2c_get_clientdata(client);
+
+ free_irq(client->irq, sensor);
+ hwmon_device_unregister(sensor->dev);
+ sysfs_remove_group(&client->dev.kobj, &smb380_group);
+ i2c_set_clientdata(client, NULL);
+ kfree(sensor);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int smb380_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ smb380_set_sleep(client, 1);
+
+ return 0;
+}
+
+static int smb380_resume(struct i2c_client *client)
+{
+ smb380_set_sleep(client, 0);
+
+ return 0;
+}
+
+#else
+#define smb380_suspend NULL
+#define smb380_resume NULL
+
+#endif
+
+static const struct i2c_device_id smb380_ids[] = {
+ { "smb380", 0 },
+ { "bma023", 1 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, smb380_ids);
+
+static struct i2c_driver smb380_i2c_driver = {
+ .driver = {
+ .name = "smb380",
+ },
+ .probe = smb380_probe,
+ .remove = __devexit_p(smb380_remove),
+ .suspend = smb380_suspend,
+ .resume = smb380_resume,
+ .id_table = smb380_ids,
+};
+
+static int __init smb380_init(void)
+{
+ return i2c_add_driver(&smb380_i2c_driver);
+}
+module_init(smb380_init);
+
+static void __exit smb380_exit(void)
+{
+ i2c_del_driver(&smb380_i2c_driver);
+}
+module_exit(smb380_exit);
+
+MODULE_AUTHOR("Kim Kyuwon <q1.kim(a)samsung.com>");
+MODULE_DESCRIPTION("SMB380/BMA023 Tri-axis accelerometer driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/smb380.h b/include/linux/smb380.h
new file mode 100644
index 0000000..15e6c3e
--- /dev/null
+++ b/include/linux/smb380.h
@@ -0,0 +1,20 @@
+/*
+ * smb380.h - SMB380 Tri-axis accelerometer driver
+ *
+ * Copyright (c) 2009 Samsung Eletronics
+ * Kyungmin Park <kyungmin.park(a)samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _SMB380_H_
+#define _SMB380_H_
+
+struct smb380_platform_data {
+ int trans_matrix[3][3];
+};
+
+#endif /* _SMB380_H_ */
--
1.6.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/