From: Joonyoung Shim on
Use genirq and provide seperated file for interrupts support.

Signed-off-by: Joonyoung Shim <jy0922.shim(a)samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park(a)samsung.com>
Reviewed-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo(a)linux.intel.com>
---
drivers/mfd/Kconfig | 2 +-
drivers/mfd/Makefile | 2 +-
drivers/mfd/max8998-irq.c | 255 +++++++++++++++++++++++++++++++++++
drivers/mfd/max8998.c | 25 ++++-
include/linux/mfd/max8998-private.h | 72 ++++++++++-
include/linux/mfd/max8998.h | 11 +-
6 files changed, 358 insertions(+), 9 deletions(-)
create mode 100644 drivers/mfd/max8998-irq.c

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ad61a9e..ee2d1a7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -254,7 +254,7 @@ config MFD_MAX8925

config MFD_MAX8998
bool "Maxim Semiconductor MAX8998 PMIC Support"
- depends on I2C=y
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8998. This is
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a362ccf..565e021 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -56,7 +56,7 @@ obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
obj-$(CONFIG_PMIC_DA903X) += da903x.o
max8925-objs := max8925-core.o max8925-i2c.o
obj-$(CONFIG_MFD_MAX8925) += max8925.o
-obj-$(CONFIG_MFD_MAX8998) += max8998.o
+obj-$(CONFIG_MFD_MAX8998) += max8998.o max8998-irq.o

pcf50633-objs := pcf50633-core.o pcf50633-irq.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
diff --git a/drivers/mfd/max8998-irq.c b/drivers/mfd/max8998-irq.c
new file mode 100644
index 0000000..346fd29
--- /dev/null
+++ b/drivers/mfd/max8998-irq.c
@@ -0,0 +1,255 @@
+/*
+ * Interrupt controller support for MAX8998
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim(a)samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/max8998-private.h>
+
+struct max8998_irq_data {
+ int reg;
+ int mask;
+};
+
+static struct max8998_irq_data max8998_irqs[] = {
+ [MAX8998_IRQ_DCINF] = {
+ .reg = 1,
+ .mask = MAX8998_IRQ_DCINF_MASK,
+ },
+ [MAX8998_IRQ_DCINR] = {
+ .reg = 1,
+ .mask = MAX8998_IRQ_DCINR_MASK,
+ },
+ [MAX8998_IRQ_JIGF] = {
+ .reg = 1,
+ .mask = MAX8998_IRQ_JIGF_MASK,
+ },
+ [MAX8998_IRQ_JIGR] = {
+ .reg = 1,
+ .mask = MAX8998_IRQ_JIGR_MASK,
+ },
+ [MAX8998_IRQ_PWRONF] = {
+ .reg = 1,
+ .mask = MAX8998_IRQ_PWRONF_MASK,
+ },
+ [MAX8998_IRQ_PWRONR] = {
+ .reg = 1,
+ .mask = MAX8998_IRQ_PWRONR_MASK,
+ },
+ [MAX8998_IRQ_WTSREVNT] = {
+ .reg = 2,
+ .mask = MAX8998_IRQ_WTSREVNT_MASK,
+ },
+ [MAX8998_IRQ_SMPLEVNT] = {
+ .reg = 2,
+ .mask = MAX8998_IRQ_SMPLEVNT_MASK,
+ },
+ [MAX8998_IRQ_ALARM1] = {
+ .reg = 2,
+ .mask = MAX8998_IRQ_ALARM1_MASK,
+ },
+ [MAX8998_IRQ_ALARM0] = {
+ .reg = 2,
+ .mask = MAX8998_IRQ_ALARM0_MASK,
+ },
+ [MAX8998_IRQ_ONKEY1S] = {
+ .reg = 3,
+ .mask = MAX8998_IRQ_ONKEY1S_MASK,
+ },
+ [MAX8998_IRQ_TOPOFFR] = {
+ .reg = 3,
+ .mask = MAX8998_IRQ_TOPOFFR_MASK,
+ },
+ [MAX8998_IRQ_DCINOVPR] = {
+ .reg = 3,
+ .mask = MAX8998_IRQ_DCINOVPR_MASK,
+ },
+ [MAX8998_IRQ_CHGRSTF] = {
+ .reg = 3,
+ .mask = MAX8998_IRQ_CHGRSTF_MASK,
+ },
+ [MAX8998_IRQ_DONER] = {
+ .reg = 3,
+ .mask = MAX8998_IRQ_DONER_MASK,
+ },
+ [MAX8998_IRQ_CHGFAULT] = {
+ .reg = 3,
+ .mask = MAX8998_IRQ_CHGFAULT_MASK,
+ },
+ [MAX8998_IRQ_LOBAT1] = {
+ .reg = 4,
+ .mask = MAX8998_IRQ_LOBAT1_MASK,
+ },
+ [MAX8998_IRQ_LOBAT2] = {
+ .reg = 4,
+ .mask = MAX8998_IRQ_LOBAT2_MASK,
+ },
+};
+
+static inline struct max8998_irq_data *
+irq_to_max8998_irq(struct max8998_dev *max8998, int irq)
+{
+ return &max8998_irqs[irq - max8998->irq_base];
+}
+
+static void max8998_irq_lock(unsigned int irq)
+{
+ struct max8998_dev *max8998 = get_irq_chip_data(irq);
+
+ mutex_lock(&max8998->irqlock);
+}
+
+static void max8998_irq_sync_unlock(unsigned int irq)
+{
+ struct max8998_dev *max8998 = get_irq_chip_data(irq);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(max8998->irq_masks_cur); i++) {
+ /*
+ * If there's been a change in the mask write it back
+ * to the hardware.
+ */
+ if (max8998->irq_masks_cur[i] != max8998->irq_masks_cache[i]) {
+ max8998->irq_masks_cache[i] = max8998->irq_masks_cur[i];
+ max8998_write_reg(max8998->i2c, MAX8998_REG_IRQM1 + i,
+ max8998->irq_masks_cur[i]);
+ }
+ }
+
+ mutex_unlock(&max8998->irqlock);
+}
+
+static void max8998_irq_unmask(unsigned int irq)
+{
+ struct max8998_dev *max8998 = get_irq_chip_data(irq);
+ struct max8998_irq_data *irq_data = irq_to_max8998_irq(max8998, irq);
+
+ max8998->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
+}
+
+static void max8998_irq_mask(unsigned int irq)
+{
+ struct max8998_dev *max8998 = get_irq_chip_data(irq);
+ struct max8998_irq_data *irq_data = irq_to_max8998_irq(max8998, irq);
+
+ max8998->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
+}
+
+static struct irq_chip max8998_irq_chip = {
+ .name = "max8998",
+ .bus_lock = max8998_irq_lock,
+ .bus_sync_unlock = max8998_irq_sync_unlock,
+ .mask = max8998_irq_mask,
+ .unmask = max8998_irq_unmask,
+};
+
+static irqreturn_t max8998_irq_thread(int irq, void *data)
+{
+ struct max8998_dev *max8998 = data;
+ u8 irq_reg[MAX8998_NUM_IRQ_REGS];
+ int ret;
+ int i;
+
+ ret = max8998_bulk_read(max8998->i2c, MAX8998_REG_IRQ1,
+ MAX8998_NUM_IRQ_REGS, irq_reg);
+ if (ret < 0) {
+ dev_err(max8998->dev, "Failed to read interrupt register: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ /* Apply masking */
+ for (i = 0; i < MAX8998_NUM_IRQ_REGS; i++)
+ irq_reg[i] &= ~max8998->irq_masks_cur[i];
+
+ /* Report */
+ for (i = 0; i < MAX8998_IRQ_NR; i++) {
+ if (irq_reg[max8998_irqs[i].reg - 1] & max8998_irqs[i].mask)
+ handle_nested_irq(max8998->irq_base + i);
+ }
+
+ return IRQ_HANDLED;
+}
+
+int max8998_irq_init(struct max8998_dev *max8998)
+{
+ int i;
+ int cur_irq;
+ int ret;
+
+ if (!max8998->irq) {
+ dev_warn(max8998->dev,
+ "No interrupt specified, no interrupts\n");
+ max8998->irq_base = 0;
+ return 0;
+ }
+
+ if (!max8998->irq_base) {
+ dev_err(max8998->dev,
+ "No interrupt base specified, no interrupts\n");
+ return 0;
+ }
+
+ mutex_init(&max8998->irqlock);
+
+ /* Mask the individual interrupt sources */
+ for (i = 0; i < MAX8998_NUM_IRQ_REGS; i++) {
+ max8998->irq_masks_cur[i] = 0xff;
+ max8998->irq_masks_cache[i] = 0xff;
+ max8998_write_reg(max8998->i2c, MAX8998_REG_IRQM1 + i, 0xff);
+ }
+
+ max8998_write_reg(max8998->i2c, MAX8998_REG_STATUSM1, 0xff);
+ max8998_write_reg(max8998->i2c, MAX8998_REG_STATUSM2, 0xff);
+
+ /* register with genirq */
+ for (i = 0; i < MAX8998_IRQ_NR; i++) {
+ cur_irq = i + max8998->irq_base;
+ set_irq_chip_data(cur_irq, max8998);
+ set_irq_chip_and_handler(cur_irq, &max8998_irq_chip,
+ handle_edge_irq);
+ set_irq_nested_thread(cur_irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(cur_irq, IRQF_VALID);
+#else
+ set_irq_noprobe(cur_irq);
+#endif
+ }
+
+ ret = request_threaded_irq(max8998->irq, NULL, max8998_irq_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max8998-irq", max8998);
+ if (ret) {
+ dev_err(max8998->dev, "Failed to request IRQ %d: %d\n",
+ max8998->irq, ret);
+ return ret;
+ }
+
+ if (!max8998->ono)
+ return 0;
+
+ ret = request_threaded_irq(max8998->ono, NULL, max8998_irq_thread,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+ IRQF_ONESHOT, "max8998-ono", max8998);
+ if (ret)
+ dev_err(max8998->dev, "Failed to request IRQ %d: %d\n",
+ max8998->ono, ret);
+
+ return 0;
+}
+
+void max8998_irq_exit(struct max8998_dev *max8998)
+{
+ if (max8998->irq)
+ free_irq(max8998->irq, max8998);
+}
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 183964e..7e4489f 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -1,5 +1,5 @@
/*
- * max8698.c - mfd core driver for the Maxim 8998
+ * max8998.c - mfd core driver for the Maxim 8998
*
* Copyright (C) 2009-2010 Samsung Electronics
* Kyungmin Park <kyungmin.park(a)samsung.com>
@@ -53,6 +53,21 @@ int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
}
EXPORT_SYMBOL(max8998_read_reg);

+int max8998_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
+{
+ struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&max8998->iolock);
+ ret = i2c_smbus_read_i2c_block_data(i2c, reg, count, buf);
+ mutex_unlock(&max8998->iolock);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(max8998_bulk_read);
+
int max8998_write_reg(struct i2c_client *i2c, u8 reg, u8 value)
{
struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
@@ -87,6 +102,7 @@ EXPORT_SYMBOL(max8998_update_reg);
static int max8998_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
+ struct max8998_platform_data *pdata = i2c->dev.platform_data;
struct max8998_dev *max8998;
int ret = 0;

@@ -99,8 +115,15 @@ static int max8998_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, max8998);
max8998->dev = &i2c->dev;
max8998->i2c = i2c;
+ max8998->irq = i2c->irq;
+ if (pdata) {
+ max8998->ono = pdata->ono;
+ max8998->irq_base = pdata->irq_base;
+ }
mutex_init(&max8998->iolock);

+ max8998_irq_init(max8998);
+
ret = mfd_add_devices(max8998->dev, -1,
max8998_devs, ARRAY_SIZE(max8998_devs),
NULL, 0);
diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h
index f0a20cd..3bd2371 100644
--- a/include/linux/mfd/max8998-private.h
+++ b/include/linux/mfd/max8998-private.h
@@ -1,5 +1,5 @@
/*
- * max8698.h - Voltage regulator driver for the Maxim 8998
+ * max8998.h - Voltage regulator driver for the Maxim 8998
*
* Copyright (C) 2009-2010 Samsung Electrnoics
* Kyungmin Park <kyungmin.park(a)samsung.com>
@@ -23,6 +23,8 @@
#ifndef __LINUX_MFD_MAX8998_PRIV_H
#define __LINUX_MFD_MAX8998_PRIV_H

+#define MAX8998_NUM_IRQ_REGS 4
+
/* MAX 8998 registers */
enum {
MAX8998_REG_IRQ1,
@@ -72,20 +74,86 @@ enum {
MAX8998_REG_LBCNFG2,
};

+/* IRQ definitions */
+enum {
+ MAX8998_IRQ_DCINF,
+ MAX8998_IRQ_DCINR,
+ MAX8998_IRQ_JIGF,
+ MAX8998_IRQ_JIGR,
+ MAX8998_IRQ_PWRONF,
+ MAX8998_IRQ_PWRONR,
+
+ MAX8998_IRQ_WTSREVNT,
+ MAX8998_IRQ_SMPLEVNT,
+ MAX8998_IRQ_ALARM1,
+ MAX8998_IRQ_ALARM0,
+
+ MAX8998_IRQ_ONKEY1S,
+ MAX8998_IRQ_TOPOFFR,
+ MAX8998_IRQ_DCINOVPR,
+ MAX8998_IRQ_CHGRSTF,
+ MAX8998_IRQ_DONER,
+ MAX8998_IRQ_CHGFAULT,
+
+ MAX8998_IRQ_LOBAT1,
+ MAX8998_IRQ_LOBAT2,
+
+ MAX8998_IRQ_NR,
+};
+
+#define MAX8998_IRQ_DCINF_MASK (1 << 2)
+#define MAX8998_IRQ_DCINR_MASK (1 << 3)
+#define MAX8998_IRQ_JIGF_MASK (1 << 4)
+#define MAX8998_IRQ_JIGR_MASK (1 << 5)
+#define MAX8998_IRQ_PWRONF_MASK (1 << 6)
+#define MAX8998_IRQ_PWRONR_MASK (1 << 7)
+
+#define MAX8998_IRQ_WTSREVNT_MASK (1 << 0)
+#define MAX8998_IRQ_SMPLEVNT_MASK (1 << 1)
+#define MAX8998_IRQ_ALARM1_MASK (1 << 2)
+#define MAX8998_IRQ_ALARM0_MASK (1 << 3)
+
+#define MAX8998_IRQ_ONKEY1S_MASK (1 << 0)
+#define MAX8998_IRQ_TOPOFFR_MASK (1 << 2)
+#define MAX8998_IRQ_DCINOVPR_MASK (1 << 3)
+#define MAX8998_IRQ_CHGRSTF_MASK (1 << 4)
+#define MAX8998_IRQ_DONER_MASK (1 << 5)
+#define MAX8998_IRQ_CHGFAULT_MASK (1 << 7)
+
+#define MAX8998_IRQ_LOBAT1_MASK (1 << 0)
+#define MAX8998_IRQ_LOBAT2_MASK (1 << 1)
+
/**
* struct max8998_dev - max8998 master device for sub-drivers
* @dev: master device of the chip (can be used to access platform data)
* @i2c: i2c client private data
* @iolock: mutex for serializing io access
+ * @irqlock: mutex for buslock
+ * @irq_base: base IRQ number for max8998, required for IRQs
+ * @irq: generic IRQ number for max8998
+ * @ono: power onoff IRQ number for max8998
+ * @irq_masks_cur: currently active value
+ * @irq_masks_cache: cached hardware value
*/
-
struct max8998_dev {
struct device *dev;
struct i2c_client *i2c;
struct mutex iolock;
+ struct mutex irqlock;
+
+ int irq_base;
+ int irq;
+ int ono;
+ u8 irq_masks_cur[MAX8998_NUM_IRQ_REGS];
+ u8 irq_masks_cache[MAX8998_NUM_IRQ_REGS];
};

+int max8998_irq_init(struct max8998_dev *max8998);
+void max8998_irq_exit(struct max8998_dev *max8998);
+
extern int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
+extern int max8998_bulk_read(struct i2c_client *i2c, u8 reg, int count,
+ u8 *buf);
extern int max8998_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
extern int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);

diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
index 1d3601a..d47ed4c 100644
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@@ -1,5 +1,5 @@
/*
- * max8698.h - Voltage regulator driver for the Maxim 8998
+ * max8998.h - Voltage regulator driver for the Maxim 8998
*
* Copyright (C) 2009-2010 Samsung Electrnoics
* Kyungmin Park <kyungmin.park(a)samsung.com>
@@ -66,13 +66,16 @@ struct max8998_regulator_data {

/**
* struct max8998_board - packages regulator init data
- * @num_regulators: number of regultors used
* @regulators: array of defined regulators
+ * @num_regulators: number of regultors used
+ * @irq_base: base IRQ number for max8998, required for IRQs
+ * @ono: power onoff IRQ number for max8998
*/
-
struct max8998_platform_data {
- int num_regulators;
struct max8998_regulator_data *regulators;
+ int num_regulators;
+ int irq_base;
+ int ono;
};

#endif /* __LINUX_MFD_MAX8998_H */
--
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/