From: Marek Vasut on
In case regulator was not found, ADS7846 failed to probe.

This fixes a problem on some Sharp Zaurus devices, where there is no regulator
present and the touchscreen is used.

Signed-off-by: Marek Vasut <marek.vasut(a)gmail.com>
---
drivers/input/touchscreen/ads7846.c | 38 +++++++++++++++++++---------------
1 files changed, 21 insertions(+), 17 deletions(-)

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index a9fdf55..53b318b 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -791,7 +791,8 @@ static void ads7846_disable(struct ads7846 *ts)
}
}

- regulator_disable(ts->reg);
+ if (ts->reg)
+ regulator_disable(ts->reg);

/* we know the chip's in lowpower mode since we always
* leave it that way after every request
@@ -804,7 +805,8 @@ static void ads7846_enable(struct ads7846 *ts)
if (!ts->disabled)
return;

- regulator_enable(ts->reg);
+ if (ts->reg)
+ regulator_enable(ts->reg);

ts->disabled = 0;
ts->irq_disabled = 0;
@@ -1162,16 +1164,15 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ts->last_msg = m;

ts->reg = regulator_get(&spi->dev, "vcc");
- if (IS_ERR(ts->reg)) {
- err = PTR_ERR(ts->reg);
- dev_err(&spi->dev, "unable to get regulator: %d\n", err);
- goto err_free_gpio;
- }
-
- err = regulator_enable(ts->reg);
- if (err) {
- dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
- goto err_put_regulator;
+ if (IS_ERR(ts->reg))
+ ts->reg = NULL;
+ else {
+ err = regulator_enable(ts->reg);
+ if (err) {
+ dev_err(&spi->dev, "unable to enable regulator: %d\n",
+ err);
+ goto err_put_regulator;
+ }
}

if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
@@ -1218,10 +1219,11 @@ static int __devinit ads7846_probe(struct spi_device *spi)
err_free_irq:
free_irq(spi->irq, ts);
err_disable_regulator:
- regulator_disable(ts->reg);
+ if (ts->reg)
+ regulator_disable(ts->reg);
err_put_regulator:
- regulator_put(ts->reg);
- err_free_gpio:
+ if (ts->reg)
+ regulator_put(ts->reg);
if (ts->gpio_pendown != -1)
gpio_free(ts->gpio_pendown);
err_cleanup_filter:
@@ -1251,8 +1253,10 @@ static int __devexit ads7846_remove(struct spi_device *spi)
/* suspend left the IRQ disabled */
enable_irq(ts->spi->irq);

- regulator_disable(ts->reg);
- regulator_put(ts->reg);
+ if (ts->reg) {
+ regulator_disable(ts->reg);
+ regulator_put(ts->reg);
+ }

if (ts->gpio_pendown != -1)
gpio_free(ts->gpio_pendown);
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/