PIC interface
in [DSP]
|
Prev: How is this related to image processing?
Next: Using IIR Filter Library for different frequencies on TI eZdsp f2812
From: ron on 24 Feb 2006 01:00 hi all, i'm doing this project in voice playback and recording.i'm using PIC18F452 and ISD2560 voice chip. do i need to put a latch between th epic and isd chip? and if so, which one is best suited for the same? thanks
From: Tim Wescott on 24 Feb 2006 01:17 ron wrote: > hi all, > i'm doing this project in voice playback and recording.i'm using > PIC18F452 and ISD2560 voice chip. > do i need to put a latch between th epic and isd chip? and if so, which > one is best suited for the same? > thanks > This would be a good question for sci.electronics.basics. -- Tim Wescott Wescott Design Services http://www.wescottdesign.com Posting from Google? See http://cfaj.freeshell.org/google/
From: Howard Long on 24 Feb 2006 05:45
"ron" <neha.7sp(a)gmail.com> wrote in message news:1140760849.540770.303610(a)p10g2000cwp.googlegroups.com... > hi all, > i'm doing this project in voice playback and recording.i'm using > PIC18F452 and ISD2560 voice chip. > do i need to put a latch between th epic and isd chip? and if so, which > one is best suited for the same? > thanks I cannot see why you'd need a latch unless you're running out of GPIO pins on the PIC due to other requirements you've not mentioned. Regards, Howard |