Prev: Smartnet
Next: Cisco 827H
From: rg on 17 Apr 2008 07:51
I have set up my ipsec vpn as followes. The lan subnet is 192.168.3.0. The
vpn subnet is 192.168.4.0. After sucessful vpn connection, I am not able
access machines on lan. What else would I need to do to have lan access?

Thanks in advance,

name 192.168.3.0 LAN

access-list outside_cryptomap_dyn_20 permit ip LAN 255.255.255.0 192.168.4.0
255.255.255.0

ip address inside 192.168.3.3 255.255.255.0

ip local pool ippool 192.168.4.1-192.168.4.254

nat (inside) 0 access-list outside_cryptomap_dyn_20
nat (inside) 1 0.0.0.0 0.0.0.0 0 0

crypto ipsec transform-set outside_set esp-des esp-md5-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set outside_set
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup vpn3000 address-pool ippool
vpngroup vpn3000 dns-server 192.168.3.29
vpngroup vpn3000 default-domain masmid.com
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********

 | 
Pages: 1
Prev: Smartnet
Next: Cisco 827H