Q: Holder error #50 on KM DS 5400 II
in [Scanners]
|
Prev: Film scanner with big loader?
Next: M I.5'P ersecution ' M I5 are Afr aid to Admi t Theyr e Behind th e Pers ecution
From: Dubravko Grakalic on 28 Dec 2007 18:01 Hello! I just purchase Konica Minolta Dimage 5400 II scanner, and after few days I have holder error #50 problem.. Holder is stil in scanner and I can't pull out... What now? Thanx for advice!
From: Toni Nikkanen on 28 Dec 2007 19:34 "Dubravko Grakalic" <Dubravko.Grakalic(a)zg.t-com.hr> writes: > Hello! > I just purchase Konica Minolta Dimage 5400 II scanner, and after few days I > have holder error #50 problem.. Holder is stil in scanner and I can't pull > out... > What now? > Thanx for advice! I had the same kind of scanner for 2 years. I'm sorry I can't offer any exact help, but in my two years of use, the holder would occasionally jam in the scanner. Most of the time, if not always, it was due to my putting a too long strip of film in the holder which prevented it from closing properly. A confusing and scary session of trying to get the holder out consisted of using the supplied pin in the hole on the left side of the scanner and trying to push and pull the holder back and forth with a series of random attempts of shutting down and starting of the scanner. Eventually the holder would come out neatly. I eventually learned to be very sure the film holder closes properly, after which I no longer encountered this annoying problem. I continue to make sure of this with my Nikon coolscan 8000, which, if I read correctly, requires me to open the whole device in case the holder gets jammed, and I definitely do not want to do that. So far I haven't had this problem.
From: Dubravko Grakalic on 29 Dec 2007 02:35
Thanx for advice! "Toni Nikkanen" <toni(a)morgoth.tuug.fi> wrote in message news:rlpsl1mtk39.fsf(a)morgoth.tuug.fi... > "Dubravko Grakalic" <Dubravko.Grakalic(a)zg.t-com.hr> writes: > >> Hello! >> I just purchase Konica Minolta Dimage 5400 II scanner, and after few days >> I >> have holder error #50 problem.. Holder is stil in scanner and I can't >> pull >> out... >> What now? >> Thanx for advice! > > I had the same kind of scanner for 2 years. I'm sorry I can't offer > any exact help, but in my two years of use, the holder would > occasionally jam in the scanner. Most of the time, if not always, it > was due to my putting a too long strip of film in the holder which > prevented it from closing properly. > > A confusing and scary session of trying to get the holder out > consisted of using the supplied pin in the hole on the left side of > the scanner and trying to push and pull the holder back and forth with > a series of random attempts of shutting down and starting of the > scanner. Eventually the holder would come out neatly. > > I eventually learned to be very sure the film holder closes properly, > after which I no longer encountered this annoying problem. I continue > to make sure of this with my Nikon coolscan 8000, which, if I read > correctly, requires me to open the whole device in case the holder > gets jammed, and I definitely do not want to do that. So far I haven't > had this problem. > > |